References
- Shin GH, Choi JP, Kim KT, et al. Study on microstructures and hardness of STS316L fabricated by selective laser melting. J Korean Powder Metall Inst. 2017;24:210–215.
- Ambrosi A, Pumera M. 3D-printing technologies for electrochemical applications. Chem Soc Rev. 2016;45:2740–2755.
- Thijs L, Verhaeghe F, Craeghs T, et al. A study of the microstructural evolution during selective laser melting of Ti–6Al–4 V. Acta Mater. 2010;58:3303–3312.
- Attar H, Prashanth KG, Chaubey AK, et al. Comparison of wear properties of commercially pure titanium prepared by selective laser melting and casting processes. Mater Lett. 2015;142:38–41.
- Suryawanshi J, Prashanth KG, Scudino S, et al. Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting. Acta Mater. 2016;115:285–294.
- Nandwana P, Elliott AM, Siddel D, et al. Powder bed binder jet 3D printing of Inconel 718: densification, microstructural evolution and challenges. Curr Opin Solid State Mater Sci. 2017:21(4):207–218.
- Aboulkhair NT, Maskery I, Tuck C, et al. The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment. Mater Sci Eng A. 2016;667:139–146.
- Li XP, Ji G, Chen Z, et al. Selective laser melting of nano-TiB 2 decorated AlSi10Mg alloy with high fracture strength and ductility. Acta Mater. 2017:129:183–193.
- Martin JH, Yahata BD, Hundley JM, et al. 3D printing of high-strength aluminium alloys. Nature. 2017;549:365–369.
- Kim HT, Kil SC. High efficient Welding technology of the Car bodies. J Welding Joining. 2016;34:62–66.
- Read N, Wang W, Essa K, et al. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development. Mater Des. 2015;65(1980-2015):417–424.
- Louvis E, Fox P, Sutcliffe CJ. Selective laser melting of aluminium components. J Mater Process Technol. 2011:211(2):275–284.
- Aboulkhair NT, Everitt NM, Ashcroft I, et al. Reducing porosity in AlSi10Mg parts processed by selective laser melting. Addit Manuf. 2014;1–4:77–86.
- Gao C, Liu Z, Xiao Z, et al. Effect of heat treatment on SLM-fabricated TiN/AlSi10Mg composites: Microstructural evolution and mechanical properties. J Alloys Compd. 2021;853:156722–156727.
- Liu Y, Wang R, Peng C, et al. Microstructural evolution and mechanical performance of in-situ TiB2/AlSi10Mg composite manufactured by selective laser melting. J Alloys Compd. 2021;853:157287–157297.
- Tahiri H, Mohamed SS, Doty HW, et al. Effect of Sr–grain refining–Si interactions on the Microstructural characteristics of Al–Si hypoeutectic alloys. Int J Metalcast. 2017;12(2):343–361.
- Fatahalla N, Hafiz M, Abdulkhalek M. Effect of microstructure on the mechanical properties and fracture of commercial hypoeutectic Al-Si alloy modified with Na, Sb and Sr. J Mater Sci. 1999;34:3555–3564.
- Lee GS, Eom YS, Kim KT, et al. Microstructures and Characterization of Al-Si-Mg alloy processed by selective laser melting with post-heat-treatment. J Korean Powder Metall Inst. 2019;26:138–145.
- Girelli L, Tocci M, Gelfi M, et al. Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy. Mater Sci Eng A. 2019;739:317–328.