Powder characteristics of Al_0.5CoCrFeMnNi high-entropy alloys fabricated by gas atomisation method

References

• Lu Y, Gao X, Jiang L, et al. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range. Acta Mater. 2017;124:143.
   Web of Science ®Google Scholar
• Zou Y, Wheeler JM, Ma H, et al. Nanocrystalline high-entropy alloys: a new paradigm in high-temperature vstrength and stability. Nano Lett. 2017;17:1569–1574.
   PubMed Web of Science ®Google Scholar
• Gludovatz B, Hohenwarter A, Catoor D. A fracture-resistant high-entropy alloy for cryogenic applications. Science. 2014;345:1153–1158.
   PubMed Web of Science ®Google Scholar
• George EP, Curtin WA, Tasan CC, et al. High entropy alloys: a focused review of mechanical properties and deformation mechanisms. Acta Mater. 2020;188:435–474.
   Web of Science ®Google Scholar
• Li Z, Pradeep KG, Deng Y, et al. Metastable high entropy dual phase alloys overcome the strength–ductility trade-off. Nature. 2016;534:227.
   PubMed Web of Science ®Google Scholar
• Miracle DB, Senkov ON, et al. A critical review of high entropy alloys and related concepts. Acta Mater. 2017;122:448–511.
   Web of Science ®Google Scholar
• Li R, Niu P, Yuan T, et al. Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: processability, non-equilibrium microstructure and mechanical property. J Alloy Compd. 2018;746:125–134.
   Web of Science ®Google Scholar
• Zhang Y, Zuo T, Tang Z, et al. Microstructures and properties of high-entropy alloys. Prog Mater Sci. 2014;61:1–93.
   Web of Science ®Google Scholar
• Ye Y, Wang Q, Lu J, et al. High-entropy alloy: challenges and prospects. Mater Today. 2016;19:349–362.
   Web of Science ®Google Scholar
• Alshataif YA, Sivasankaran S, Al-Mufadi FA, et al. Manufacturing methods, microstructural and mechanical properties evolutions of high-entropy alloys: a review. Met Mater Int. 2020;26:1099–1133.
   Web of Science ®Google Scholar
• Seifi M, Salem A, Beuth J, et al. Overview of materials qualification needs for metal additive manufacturing. JOM. 2016;68(3):747–764.
   Web of Science ®Google Scholar
• Kok Y, Tan XP, Wang P, et al. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review. Mater Des. 2018;139:565–586.
   Web of Science ®Google Scholar
• Sutton AT, Kriewall CS, Leu MC, et al. Powder characterization techniques and effects of powder characteristics on part properties in powder-bed fusion processes. Virtual Phys Prototyp. 2017;12:3–29.
   Web of Science ®Google Scholar
• Nguyen QB, Nai MLS, Zhu Z, et al. Characteristics of inconel powders for powder-bed additive manufacturing. Engineering. 2017;3:695–700.
   Web of Science ®Google Scholar
• Mullis AM, Bigg TD, Adkins NJ, et al. A microstructural investigation of gas atomized Raney type Al-27.5 at. % Ni catalyst precursor alloys. J Alloys Compd. 2015;648:139–148.
   Web of Science ®Google Scholar
• Brif Y, Thomas M, Todd I, et al. The use of high-entropy alloys in additive manufacturing. Scr Mater. 2015;99:93–96.
   Web of Science ®Google Scholar
• Ocelik V, Janssen N, Smith SN, et al. Additive manufacturing of high-entropy alloys by laser processing. JOM. 2016;68:1810–1818.
   Web of Science ®Google Scholar
• Wang P, Huang P, Fern LN, et al. Additively manufactured CoCrFeNiMn high-entropy alloy via pre-alloyed powder. Mater Des. 2019;168:107576.
   Web of Science ®Google Scholar
• Eißmann N, Klöden B, Weißgärber T, et al. High-entropy alloy CoCrFeMnNi produced by powder metallurgy. Powder Metall. 2017;60(3):184–197.
   Web of Science ®Google Scholar
• Methodology of powders measurement, Ostrava: Laboratory of Bulk Materials. VSB–TU Ostrava, 2014;27.
   Google Scholar
• International Standardization Organization ISO 4490:2014-Metallic Powders-Determination of flow rate by means of a calibrated funnel (Hall flowmeter). ISO 2014.
   Google Scholar
• ASTM-International ASTM F3049-14. Standard guide for characterizing properties of metal powders used for additive manufacturing processes. West Conshohocken (PA): ASTM-International; 2014.
   Google Scholar
• Schulze D. Measuring powder flowability: a comparison of test methods. Part II. Powder and bulk engineering. St Paul: CSC Publishing Inc.; 1996.
   Google Scholar
• Carr RL. Classifying flow properties of solids. Chem Eng. 1965;1:69–72.
   Google Scholar
• Raymus GJ. Handling of bulk solidsChemical engineer’s handbook. 6th ed. Perry RH, Green D, Eds., McGraw-Hill: New York, USA;1985. ISBN 978-0070494794.
   Google Scholar
• Özbilen S. Satellite formation mechanism in gas atomized powders. Powder Metall. 1999;42(1):70–78.
   Web of Science ®Google Scholar
• Conlon KT, Maire E, Wilkinson DS, et al. Processing and microstructural characterization of Al-Cu alloys produced from rapidly solidified powders. Metall Mater Trans A. 2000;31:249.
   Web of Science ®Google Scholar
• Chen Z, Lei Y, Zhang H, et al. Structure and properties of nanostructured A357 alloy produced by melt spinning compared with direct chill ingot. J Alloys Compd. 2011;509:7473.
   Web of Science ®Google Scholar
• Leung CLA, Marussi S, Towrie M, et al. The effect of powder oxidation on defect formation in laser additive manufacturing. Acta Mater. 2019;166:294–305.
   Web of Science ®Google Scholar