References
- Tabrizi AT, Azadbeh M. The effect of transient liquid phase on the joining process of aluminum foam core sandwiches. Powder Metall Prog. 2016;16(1):48–58. doi:https://doi.org/10.1515/pmp-2016-0005
- Diao HY, Feng R, Dahmen KA, et al. Fundamental deformation behavior in high-entropy alloys: an overview. Curr Opin Solid State Mater Sci. 2017;21(5):252–266.
- Cheng CY, Yang YC, Zhong YZ, et al. Physical metallurgy of concentrated solid solutions from low-entropy to high-entropy alloys. Curr Opin Solid State Mater Sci. 2017, 21: 1–13.
- Ye YF, Wang Q, Lu J, et al. High-entropy alloy: challenges and prospects. Mater Today. 2016;19(6):349–362.
- Sohn S, Liu Y, Liu J, et al. Noble metal high entropy alloys. Scr Mater. 2017;126:29–32.
- Todai M, Nagase T, Hori T, et al. Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials. Scr Mater 2017;129:65–68.
- Wang P, Wu Y, Liu J, et al. Impacts of atomic scale lattice distortion on dislocation activity in high-entropy alloys. Extrem Mech Lett. 2017;17:38–42.
- Sun X, Zhang H, Lu S, et al. Phase selection rule for Al-doped CrMnFeCoNi high-entropy alloys from first-principles. Acta Mater. 2017;140:366–374.
- Pohan RM, Gwalani B, Lee J, et al. Microstructures and mechanical properties of mechanically alloyed and spark plasma sintered Al0.3CoCrFeMnNi high entropy alloy. Mater Chem Phys. 2018;210:62–70. DOI:https://doi.org/10.1016/j.matchemphys.2017.09.013
- Wang Y, Yan M, Zhou Q, et al. Computation of entropies and phase equilibria in refractory V-Nb-Mo-Ta-W high-entropy alloys. Acta Mater. 2018;143:88–101.
- Lu Y, Jiang H, Guo S, et al. A new strategy to design eutectic high-entropy alloys using mixing enthalpy. Intermetallics. 2017;91(July):124–128.
- Qiu S, Miao N, Zhou J, et al. Strengthening mechanism of aluminum on elastic properties of NbVTiZr high-entropy alloys. Intermetallics. 2018;92(July 2017):7–14.
- Lim KR, Lee KS, Lee JS, et al. Dual-phase high-entropy alloys for high-temperature structural applications. J Alloys Compd. 2017;728:1235–1238.
- Lee KS, Kang JH, Lim KR, et al. Influence of compressive strain on the microstructural evolution of an AlCoCrFeNi high entropy alloy. Mater Charact. 2017;132(July):162–168.
- Sonkusare R, Janani PD, Gurao NP, et al. Phase equilibria in equiatomic CoCuFeMnNi high entropy alloy. Mater Chem Phys. 2018;210:269–278. DOI:https://doi.org/10.1016/j.matchemphys.2017.08.051
- Huang S, Li X, Huang H, et al. Mechanical performance of FeCrCoMnAl high-entropy alloys from first-principle. Mater Chem Phys. 2018;210:37–42. DOI:https://doi.org/10.1016/j.matchemphys.2017.08.061
- Zhang LJ, Yu PF, Zhang MD, et al. Microstructure and mechanical behaviors of GdxCoCrCuFeNi high-entropy alloys. Mater Sci Eng A. 2017;707:708–716.
- Ayyagari A, Barthelemy C, Gwalani B, et al. Reciprocating sliding wear behavior of high entropy alloys in dry and marine environments. Mater Chem Phys. 2018;210:162–169. DOI:https://doi.org/10.1016/j.matchemphys.2017.07.031
- Mathiou C, Poulia A, Georgatis E, et al. Microstructural features and dry sliding wear response of MoTaNbZrTi high entropy alloy. Mater Chem Phys. 2018;210:126–135. DOI:https://doi.org/10.1016/j.matchemphys.2017.08.036
- Hadraba H, Chlup Z, Dlouhy A, et al. Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy. Mater Sci Eng A. 2017;689:252–256.
- Chang YJ, Yeh AC. The formation of cellular precipitate and its effect on the tensile properties of a precipitation strengthened high entropy alloy. Mater Chem Phys. 2018;210:111–119. DOI:https://doi.org/10.1016/j.matchemphys.2017.09.057
- Kireeva IV, Chumlyakov YI, Pobedennaya ZV, et al. Orientation dependence of twinning in single crystalline CoCrFeMnNi high-entropy alloy. Mater Sci Eng A. 2017;705:176–181.
- Yim D, Jang MJ, Bae JW, et al. Compaction behavior of water-atomized CoCrFeMnNi high-entropy alloy powders. Mater Chem Phys. 2018;210:95–102. DOI:https://doi.org/10.1016/j.matchemphys.2017.06.013
- Thurston KVS, Gludovatz B, Hohenwarter A, et al. Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi. Intermetallics. 2017;88(May):65–72.
- Mehrabani SAN, Tabrizi AT, Aghajani H, et al. Corrosion behavior of SHS-Produced Cu–Ti–B composites. Int J Self Propag High Temp Synth. 2020;29:167–172. DOI:https://doi.org/10.3103/S1061386220030061
- Pourbagheri H, Aghajani H. SHS-produced al – Ti – B master alloys : performance in commercial Al alloy 1. 2018;27(4):245–254.
- Saadati A, Aghajani H. Fabrication of porous NiTi biomedical alloy by SHS method. J Mater Sci Mater Med. 2019;30:92. DOI:https://doi.org/10.1007/s10856-019-6296-9
- Hu X, Chen G, Ion C, et al. The 1100°C isothermal section of the Ti-Ni-Si ternary system. J Phase Equilib. 1999;20(5).
- Golnaz NA, Arvin TT, Aghajani H. Investigation on corrosion behavior of Cu – TiO2 nanocomposite synthesized by the use of SHS method. Integr Med Res. 2019;8(2):2216–2222.
- Javaherian SS, Aghajani H, Mehdizadeh P. Cu-TiO2 composite as fabricated by SHS method. Int J Self-Propag High-Temp Synth. 2014;23(1):47–54.