Ferrothermal reduction of iron(III)phosphate insulating layers in soft magnetic composites

References

• Dougan, MJ. High Performance sintered soft magnetic materials. Proceedings of the PM World Congress PM2010; 2010; Florence, Italy. Shrewsbury UK: EPMA; vol. 5. p. 229–236.
   Google Scholar
• Moyer KH, McDermott MJ, Topolski MJ, et al. Magnetic properties of iron alloys. Powder Technol. 1981;30:51–71.
   Web of Science ®Google Scholar
• Moyer KH, Ryan JB. Enhanced properties of emerging powders for magnetic components. Met Powder Rep. 1990;45:202–207.
   Google Scholar
• Dougan MJ. Powder metallurgical materials and processes for soft magnetic applications. Workshop on SRM drives an alternative for E-traction, Barcelona, Spain [cited 2020 Aug 9]. Available from: webside:upcommons.upc.edu/bitstream/handle/2117/116155/01_powder_metallurgical_materials_processes_soft_magnetic_applications.pdf?sequence=1&isAllowed = y.
   Google Scholar
• Capus JM. PM soft magnets in new applications. Met Powder Rep. 2002;57:20–21.
   Google Scholar
• Cheng Z, Takahashi N, Forghani B, et al. Analysis and measurements of iron loss and flux inside silicon steel laminations. IEEE Trans Magn. 2009;45:1222–1225.
   Web of Science ®Google Scholar
• Atallah K, Howe D. Calculation of the rotational power loss in electrical steel laminations from measured H and B. IEEE Trans Magn. 1993;29:3547–3549.
   Web of Science ®Google Scholar
• Brauer JR, Cendes ZJ, Beihoff BC, et al. Laminated steel eddy current loss versus frequency computed using finite elements. IEEE Trans Magn. 2000;36:1132–1137.
   Google Scholar
• Janghorban K, Shokrollahi H. Soft magnetic composite materials (SMCs). J Mater Process Technol. 2007;189:1–12.
   Web of Science ®Google Scholar
• Janghorban K, Shokrollahi H. Effect of warm compaction on the magnetic and electrical properties of Fe-based soft magnetic composites. J Magn Magn Mater. 2007;313:182–186.
   Web of Science ®Google Scholar
• Janghorban K, Shokrollahi H. Different annealing treatments for improvement of magnetic and electrical properties of soft magnetic composites. J Mag Mater. 2006;317:61–67.
   Web of Science ®Google Scholar
• Oikonomou C. On surface characteristics and microstructural development of soft magnetic composite powder and components [doctoral thesis]. Gothenburg (Sweden): Chalmers University of Technology; 2015.
   Google Scholar
• Oikonomou C. Surface characterization of soft magnetic composite powder and compacts [master thesis]. Gothenburg (Sweden): Chalmers University of Technology; 2014.
   Google Scholar
• Taghvaei AH, Shokrollahi H, Janghorban K, et al. Eddy current and total power loss separation in the iron-phosphate-polyepoxy soft magnetic composites. Proceedings of the Euro PM2000 Conference Soft Magnetic Materials Workshop; 2000; Munich, Germany. Shrewsbury, UK: EPMA; p. 9–14.
   Google Scholar
• Krögen Ö, Jack AG. Insulated iron powder (SMC) used as Soft Magnetic Material in a rotating electrical machine. In: Kosuge K, Nagai H, editors. Proceedings of the PM World Congress PM2000; 2000; Kyoto, Japan: Tokyo: JPMA; p. 1368–1371.
   Google Scholar
• Hemmati I, Hosseini HRM, Miraghaei S. Effect of processing parameters on electrical, mechanical and magnetic properties of iron-resin soft magnetic composite. Powder Metall. 2007;50:86–90.
   Web of Science ®Google Scholar
• Pelletier S, Lefebvre LP, Thomas Y. Influence of grain size on the properties of soft magnetic iron-resin composites. Proceedings of the PM World Congress PM98 Granada; 1998; Spain. Shrewsbury, UK: EPMA; Vol. 5, p. 514–519.
   Google Scholar
• Bas JA, Morató J, Calero JA, et al. Applications for encapsulated powder materials in electric motors. Proceedings of PM2000 World Congress Soft Magnetic Material Workshop; 2000 Munich, Germany. Shrewsbury, UK: EPMA; p. 1344–1347.
   Google Scholar
• Krögen Ö, Granberg P. Soft magnetic composites: materials with tuneable magnetic properties. Proceedings of PM2000 Congress Soft Magnetic Material Workshop; 2000; Munich, Germany. Shrewsbury, UK: EPMA; p. 1352–1355.
   Google Scholar
• Rodrigues D, Emura M, Landgraf FJG, et al. Insulated iron powders: process and magnetic properties. Proceedings of the Euro PM2000 Congress Magnetic Material Workshop; 2000; Munich, Germany. Shrewsbury, UK: EPMA; p. 1360–1363.
   Google Scholar
• Hamill JA, Narasimhan S, Miller DJ. Soft magnetic iron composite – new application developments. Proceedings of the Euro PM2001 Congress Magnetic Material Workshop; 2001; Nice, France. Shrewsbury, UK: EPMA; Vol. 2, p. 257–261.
   Google Scholar
• Jansson P. Soft magnetic composites – a rapidly expanding materials group. Adv Powder Metall Part Mater. 1998;3:3–9.
   Google Scholar
• Nikas D. Characterization of electrically insulating coatings for soft magnetic composite materials by means of surface sensitive analytical techniques [master thesis]. Gothenburg (Sweden): Chalmers University of Technology; 2013.
   Google Scholar
• Huang M, Wu C, Jiang Y, et al. Evolution of phosphate coatings during high-temperature annealing and its influence on the Fe and FeSiAl soft magnetic composites. J Alloys Compd. 2015;644:124–130.
   Web of Science ®Google Scholar
• Taghvaei AH, Shokrollahi H, Janghorban K, et al. Properties of iron-based soft magnetic composite with iron phosphate–silane insulation coating. J Alloys Compd. 2009;481:681–686.
   Web of Science ®Google Scholar
• Kliman GBN, Lee SBS, Mallic JADS, et al. Methods or apparatus specially adapted for manufacturing, assembling, maintaining or repairing of dynamo-electric machines of stator or rotor bodies. Patent, registration: DE60319885T2; 2008 Apr. 30.
   Google Scholar
• http://www.xpsfitting.com/ [cited 2018 Jul 15].
   Google Scholar
• https://xpssimplified.com/. [cited 2018 Jul 15].
   Google Scholar
• Oikonomou C, de Oro Calderon R, Hryha E, et al. Effect of heat treatment in air on surface composition of iron-phosphate based soft magnetic composite components. Mater Sci Eng B. 2014;189:90–99.
   Web of Science ®Google Scholar