References
- Murty BS, Yeh JW, Ranganathan S. High-entropy alloys. 1st ed. Oxford: Elsevier, Butterworth-Heinemann; 2014.
- Cantor B, Chang ITH, Knight P, et al. Microstructural development in equiatomic multicomponent alloys. Mater Sci Eng A. 2004;375-377:213–218.
- Yeh JW, Chen SK, Lin SJ, et al. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv Eng Mater. 2004;6:299.
- Cantor B. Multicomponent and high entropy alloys. Entropy. 2014;16:4749.
- Senkov ON, Semiatin SL. Microstructure and properties of a refractory high-entropy alloy after cold working. J Alloy Compd. 2015;649:1110–1123.
- Youssef KM, Zaddach AJ, Niu C, et al. A novel low-density, high-hardness, high-entropy alloy with close-packed single-phase nanocrystalline structures. Mater Res Lett. 2014;3:95.
- Tseng K, Yang Y, Juan C, et al. A light-weight high-entropy alloy Al20Be20Fe10Si15Ti35. Sci China Technol Sci. 2018;61:184.
- Chae MJ, Sharma A, Oh MC, et al. Lightweight AlCuFeMnMgTi high entropy alloy with high strength-to-density ratio processed by powder metallurgy. Met Mater Int. 2021;27:629–638.
- Kumar A, Gupta M. An insight into evolution of light weight high entropy alloys: a review. Metals (Basel). 2016;6(9):199.
- Sanchez JM, Vicario I, Albizuri J, et al. Design, microstructure and mechanical properties of cast medium entropy aluminium alloys. Sci Rep. 2019;9:6792.
- Lukáč F, Dudr M, Čížek J, et al. Málek defects in high entropy alloy HfNbTaTiZr prepared by high pressure torsion. J Acta Phys Pol A. 2018;134:891.
- Mridha S, Samal S, Khan PY, et al. Processing and consolidation of nanocrystalline Cu-Zn-Ti-Fe-Cr high-entropy alloys via mechanical alloying. Metall Mater Trans A. 2013;44:4532.
- Sharma A, Oh MC, Ahn B. Microstructural evolution and mechanical properties of non-Cantor AlCuSiZnFe lightweight high entropy alloy processed by advanced powder metallurgy. Mater Sci Eng A. 2020;797:140066.
- Torralba JM, Alvaredo P, Junceda AG. High-entropy alloys fabricated via powder metallurgy. A critical review. Powder Metall. 2019;62(2):84.
- Sharma A, Lim DU, Jung JP. Microstructure and brazeability of SiC nanoparticles reinforced Al–9Si–20Cu produced by induction melting. Mater Sci Technol. 2016;32(8):773.
- Volkov AY, Kalonov AA, Komkova DA, et al. Structure and properties of Cu/Mg composites produced by hydrostatic extrusion. Phys Met Metallogr. 2018;119(946).
- Lee YE, Houser SL. Essential readings in light metals. Cham: Springer; 2016, p. 44–50.
- Alcala MD, Real C, Fombella I, et al. Effects of milling time, sintering temperature, Al content on the chemical nature, microhardness and microstructure of mechanochemically synthesized FeCoNiCrMn high entropy alloy. J Alloy Compd. 2018;749:834.
- Guo S. Phase selection rules for cast high entropy alloys: an overview. Mater Sci Technol. 2015;31(10):1223–1230.
- Pabi SK, Murty BS. Mechanism of mechanical alloying in Ni-Al and Cu-Zn systems. Mater Sci Eng A. 1996;214:146–152.
- Zuo KS, Xi SQ, Zhou JE. Effect of temperature on mechanical alloying of Cu-Zn and Cu-Cr system. Trans Nonferrous Met Soc China. 2009;19:1206–1214.
- Maulika O, Kumar V. Synthesis of AlFeCuCrMgx (x = 0, 0.5, 1, 1.7) alloy powders by mechanical alloying. Mater Charact. 2015;110:116–125.