References
- Rane K, Strano M. A comprehensive review of extrusion-based additive manufacturing processes for rapid production of metallic and ceramic parts. Adv Manuf. 2019;7(2):155–173.
- Rane K, Petrò S, Strano M. Evolution of porosity and geometrical quality through the ceramic extrusion additive manufacturing process stages. Addit Manuf. 2020;32:101038.
- Liu B, Wang Y, Lin Z, et al. Creating metal parts by Fused Deposition Modeling and sintering. Mater Lett. 2020;263:127252.
- Diegel O. ‘Additive manufacturing: an overview,’ in Comprehensive Materials Processing, vol. 10, Elsevier Ltd, 2014, p. 3–18.
- Wendel B, Rietzel D, Kühnlein F, et al. Addit process poly. 2008;293:799–809.
- Daminabo SC, Goel S, Grammatikos SA, et al. Fused deposition modeling-based additive manufacturing (3D printing): techniques for polymer material systems. Mater Today Chem. 2020;16:100248.
- Chen Z, Li Z, Li J, et al. 3D printing of ceramics: a review. J Eur Ceram Soc. 2019;39(4):661–687.
- Vervoort P, Martens M. ‘Secondaries for metal injection molding (MIM),’ in Handbook of metal injection molding. Elsevier. 2019: 173–194.
- ‘Density of Metals and Alloys,’ in Fundamentals of Modeling for Metals Processing, ASM International, 2018, p. 599–601.
- Joost WJ. Reducing vehicle weight and improving U.S. energy efficiency using integrated computational materials engineering. JOM. 9 2012;64(no. 9):1032–1038.
- Sezer N, Evis Z, Kayhan SM, et al. Review of magnesium-based biomaterials and their applications. J MAGNES ALLOY . 1 3 2018;6(1):23–43.
- Staiger MP, Pietak AM, Huadmai J, et al. Magnesium and its alloys as orthopedic biomaterials: A review. Biomaterials. 1 3 2006;27(no. 9):1728–1734.
- Jones H, Rashed HMMA. ‘Alloys: magnesium,’ in reference module in Materials Science and Materials Engineering. Elsevier; 2017.
- ‘Heat treatment and kinetics of precipitation of β-Mg17Al12 phase in AZ91 alloy’.
- Wei K, Gao M, Wang Z, et al. Effect of energy input on formability, microstructure and mechanical properties of selective laser melted AZ91D magnesium alloy. Mater Sci Eng A. 2014;611:212–222.
- Wolff M, Ebel T, Dahms M. Sintering of magnesium. Adv Eng Mater. 2010;12:829–836.
- KDLL, Rane SM. Processability of SS316L powder-binder mixtures for vertical extrusion and deposition on table tests. Powder Technol. 2019;345:553–562.
- Schaper JG, Wolff M, Wiese B, et al. Powder metal injection moulding and heat treatment of AZ81 Mg alloy. J Mater Process Technol. 1 5 2019;267:241–246.
- ‘Heat treating of magnesium alloys,’ in heat treating of nonferrous alloys, ASM International, 2018, p. 640–649.
- Mondet M, Barraud E, Lemonnier S, et al. Microstructure and mechanical properties of AZ91 magnesium alloy developed by Spark Plasma Sintering. Acta Mater. 15 10 2016;119:55–67.
- Ohno M, Mirkovic D, Schmid-Fetzer R. Liquidus and solidus temperatures of Mg-rich Mg-Al-Mn-Zn alloys. Acta Mater. 9 2006;54(no. 15):3883–3891.
- Ye HZ, Liu XY. In situ formation behaviors of Al8Mn5 particles in Mg–Al alloys. J Alloys Compd. 2006;419(1):54–60.
- Braszczyńska-Malik KN. Discontinuous and continuous precipitation in magnesium-aluminium type alloys. J Alloys Compd. 27 5 2009;477(1–2):870–876.
- Celotto S. TEM study of continuous precipitation IN Mg±9 Wt%Al±1 Wt%Zn ALLOY.
- ‘Properties of magnesium alloys,’ in Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM International, 2018, p. 480–516.
- Wang XJ, Zhu SM, Easton MA, et al. Heat treatment of vacuum high pressure die cast magnesium alloy AZ91. Int J Cast Met Res. 2014;vol. 23:161–166.
- Fu Y, Li Y, Hu A, et al. Microstructure, tensile properties and fracture behavior of squeeze-cast Mg alloy AZ91 with thick cross section. JMEPEG. 2020;29:4130–4141.