References
- Herzog D, Seyda V, Wycisk E, et al. Additive manufacturing of metals. Acta Mater. 2016;117:371–392. doi:https://doi.org/10.1016/j.actamat.2016.07.019.
- DebRoy T, Mukherjee T, Milewski JO, et al. Scientific, technological and economic issues in metal printing and their solutions. Nat Mater. 2019;18(10):1026–1032. doi:https://doi.org/10.1038/s41563-019-0408-2.
- Sames WJ, List FA, Pannala S, et al. The metallurgy and processing science of metal additive manufacturing. Int Mater Rev. 2016;61(5):315–360. doi:https://doi.org/10.1080/09506608.2015.1116649.
- Bose S, Ke D, Sahasrabudhe H, et al. Additive manufacturing of biomaterials. Prog Mater Sci. 2018;93:45–111. doi:https://doi.org/10.1016/j.pmatsci.2017.08.003.
- King WE, Anderson AT, Ferencz RM, et al. Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges. Appl Phys Rev. 2015;2(4):041304. doi:https://doi.org/10.1063/1.4937809.
- Francois MM, Sun A, King WE, et al. Modeling of additive manufacturing processes for metals: challenges and opportunities. Curr Opin Solid State Mater Sci. 2017;21(4):198–206. doi:https://doi.org/10.1016/j.cossms.2016.12.001.
- Seifi M, Salem A, Beuth J, et al. Overview of materials qualification needs for metal additive manufacturing. Jom. 2016;68(3):747–764. doi:https://doi.org/10.1007/s11837-015-1810-0.
- Jang TS, Kim DE, Han G, et al. Powder based additive manufacturing for biomedical application of titanium and its alloys: a review. Biomed Eng Lett. 2020;10:505–516. doi:https://doi.org/10.1007/s13534-020-00177-2.
- Frazier WE. Metal additive manufacturing: a review. J Mater Eng Perform. 2014;23:1917–1928. doi:https://doi.org/10.1007/s11665-014-0958-z.
- Chen Z, Wei P, Zhang S, et al. Graphene reinforced nickel-based superalloy composites fabricated by additive manufacturing. Mater Sci Eng A. 2020;769:138484. doi:https://doi.org/10.1016/j.msea.2019.138484.
- DebRoy T, Wei HL, Zuback JS, et al. Additive manufacturing of metallic components – process, structure and properties. Prog Mater Sci. 2018;92:112–224. doi:https://doi.org/10.1016/j.pmatsci.2017.10.001.
- Haines MP, Peter NJ, Babu SS, et al. In-situ synthesis of oxides by reactive process atmospheres during L-PBF of stainless steel. Addit Manuf. 2020;33:101178. doi:https://doi.org/10.1016/j.addma.2020.101178.
- Johnson L, Mahmoudi M, Zhang B, et al. Assessing printability maps in additive manufacturing of metal alloys. Acta Mater. 2019;176:199–210. doi:https://doi.org/10.1016/j.actamat.2019.07.005.
- Gil E, Ordás N, García-Rosales C, et al. Microstructural characterization of ODS ferritic steels at different processing stages. Fusion Eng Des. 2015;98–99:1973–1977. doi:https://doi.org/10.1016/j.fusengdes.2015.06.010.
- Chung S, Lee B, Lee SY, et al. The effects of Y pre-alloying on the in-situ dispersoids of ODS CoCrFeMniNi high-entropy alloy. J Mater Sci Technol. 2021;85:62–75. doi:https://doi.org/10.1016/j.jmst.2020.11.081.
- Konitzer DG, Stanley JT, Loretto MH, et al. The nature of dispersed phases in Ti-0.7at.%Er prepared by rapid solidification processing. Acta Metall. 1986;34(7):1269–1277. doi:https://doi.org/10.1016/0001-6160(86)90013-1.
- Weng W, Biesiekierski A, Lin J, et al. Impact of the rare earth elements scandium and yttrium on beta-type Ti-24Nb-38Zr-2Mo-base alloys for orthopedic applications. Materialia. 2020;9. Article:100586. doi:10.1016/j.mtla.2020.100586.
- Liu Y, Liu Y, Wang B, et al. Microstructures evolution and mechanical properties of a powder metallurgical titanium alloy with yttrium addition. Mater Manuf Process. 2010;25(8):735–739. doi:https://doi.org/10.1080/10426910903365778.
- Yan M, Liu Y, Schaffer GB, et al. In situ synchrotron radiation to understand the pathways for the scavenging of oxygen in commercially pure Ti and Ti-6Al-4V by yttrium hydride. Scr Mater. 2013;68(1):63–66. doi:https://doi.org/10.1016/j.scriptamat.2012.09.024.
- Yan M, Tang HP, Qian M. Scavenging of oxygen and chlorine from powder metallurgy (PM) titanium and titanium alloys. In Titanium powder metallurgy: science, technology and applications. Kidlington: Oxford: Butterworth-Heinemann; 2015. p. 253–276.
- Yang YF, Luo SD, Schaffer GB, et al. Impurity scavenging, microstructural refinement and mechanical properties of powder metallurgy titanium and titanium alloys by a small addition of cerium silicide. Mater Sci Eng A. 2013;573:166–174. doi:https://doi.org/10.1016/j.msea.2013.02.042.
- Poorganji B, Furuhara T, et al. Effect of yttrium addition on grain growth of α, β and α+β titanium alloy. J. Phys Conf Ser. 2010;240(1):1–4. doi:https://doi.org/10.1088/1742-6596/240/1/012170.
- Sungail C, Abid A. Spherical tantalum feed powder for metal additive manufacturing. Met Powder Rep. 2018;73:316–318. doi:https://doi.org/10.1016/j.mprp.2018.03.046.
- Kim DK, Il Kim Y, Lee H, et al. Gas atomization parametric study on the Viga-CC based synthesis of titanium powder. Arch Metall Mater. 2020;65:997–1000. doi:https://doi.org/10.24425/amm.2020.133205.
- Schade C, Murphy T, Bernhard G, et al. Titanium alloy development for AM utilizing gas atomization, 2017.
- Chen G, Tan P, Zhao SY, et al. Spherical Ti-6Al-4V powders produced by gas atomization. Key Eng. Mater. 2016;704:287–292. doi:https://doi.org/10.4028/www.scientific.net/KEM.704.287.
- Moon BM, Seo, JH, et al. Method of recycling titanium scraps via the electromagnetic cold crucible technique coupled with calcium treatment. J. Alloys Compd. 2017;727:931–939. doi:10.1016/j.jallcom.2017.08.129.
- Naka S, Marty M, Octor H. Oxide-dispersed titanium alloys Ti-Y prepared with the rotating electrode process. J Mater Sci. 1987;22:887–895. doi:https://doi.org/10.1007/BF01103526.
- Konitzer DG, Muddle BC, Fraser HL. A comparison of the microstructures of As-cast and laser surface melted Ti-8Al-4Y. Metall Trans A. 1983;14(10):1979–1988. doi:https://doi.org/10.1007/BF02662365.
- Yin JO, Chen G, Zhao SY, et al. Microstructural characterization and properties of Ti-28Ta at.% powders produced by plasma rotating electrode process. J Alloys Compd. 2017;713:222–228. doi:10.1016/j.jallcom.2017.04.195.
- Yamanoglu R, German RM, Karagoz S, et al. Microstructural investigation of as cast and PREP atomised Ti-6Al-4V alloy. Powder Metall. 2011;54(5):604–607. doi:https://doi.org/10.1179/1743290110Y.0000000006.
- Ilbagi A, Henein H. 3D quantitative characterization of rapidly solidified Al-36 Wt Pct Ni. Metall Mater Trans A Phys Metall Mater Sci. 2014;45:2152–2160. doi:https://doi.org/10.1007/s11661-013-2116-x.
- Tourret D, Reinhart G, Gandin CA, et al. Gas atomization of Al-Ni powders: solidification modeling and neutron diffraction analysis. Acta Mater. 2011;59(17):6658–6669. doi:https://doi.org/10.1016/j.actamat.2011.07.023.
- Zhang D, Qiu D, Gibson MA, et al. Refining prior-β grains of Ti–6Al–4V alloy through yttrium addition. J Alloys Compd. 2020;841:155733. doi:https://doi.org/10.1016/j.jallcom.2020.155733.
- Won S, Seo B, Park H-K, et al. Impact of yttrium on corrosion properties of titanium as a grain refiner. Mater Today Commun. 2020;25:101900. doi:https://doi.org/10.1016/j.mtcomm.2020.101900.
- Roy S, Suwas S, Tamirisakandala S, et al. Development of solidification microstructure in boron-modified alloy Ti-6Al-4V-0.1B. Acta Mater. 2011;59(14):5494–5510. doi:https://doi.org/10.1016/j.actamat.2011.05.023.
- Bermingham MJ, Kent D, Zhan H, et al. Controlling the microstructure and properties of wire arc additive manufactured Ti-6Al-4V with trace boron additions. Acta Mater. 2015;91:289–303. doi:https://doi.org/10.1016/j.actamat.2015.03.035.
- Williams JC, Hickman BS, Leslie DH. The effect of ternary additions on the decompositon of metastable beta-phase titanium alloys. Metall Trans. 1971;2(2):477–484. doi:https://doi.org/10.1007/BF02663337.
- Hansen N. Hall-petch relation and boundary strengthening. Scr Mater. 2004;51(8 SPEC. ISS):801–806. doi:https://doi.org/10.1016/j.scriptamat.2004.06.002.
- Leitner A, Maier-Kiener V, Kiener D. Extraction of flow behavior and Hall-Petch parameters using a nanoindentation multiple sharp tip approach . Adv Eng Mater. 2017;19(4):1600669. doi:https://doi.org/10.1002/adem.201600669.
- Wang KY, Shen TD, Quan MX, et al. Hall-Petch relationship in nanocrystalline titanium produced by ball-milling. J Mater Sci Lett. 1993;12(23):1818–1820. doi:https://doi.org/10.1007/BF00539997.
- Guo J, Duarte MJ, Zhang Y, et al. Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys. Acta Mater. 2019;166:281–293. doi:https://doi.org/10.1016/j.actamat.2018.12.040.
- Okazaki K, Conrad H. Effects of grain size and interstitial solute content on the hardness of Ti–N, Ti–O and Ti–C alloys at room temperature. Trans Japan Inst Met. 1973;14(5):364–367. doi:https://doi.org/10.2320/matertrans1960.14.364.