References
- Gaul L, Albrecht H, Wirnitzer J. Semi-active friction damping oflarge space truss structures. Shock Vib. 2004;11:565947.
- Deb K, Gulati S. Design of truss-structures for minimum weight using genetic algorithms. Finite Finite Elem Anal Des. 2001;37(5):447–465.
- Blandford GE. Large deformation analysis of inelastic space truss structures. J Struct Eng. 1996;122(4):407–415.
- Lopez A, Puente I, Aizpurua H. Experimental and analytical studies on the rotational stiffness of joints for single-layer structures. Eng Struct. 2011;33(3):731–737.
- Liu H, Tan Z, Chen Z, et al. Experimental study on residual mechanical properties of bolt-sphere joints after a fire. Int J Steel Struct. 2018;18(3):802–820.
- Fan F, Kong D, Sun M, et al. Anti-seismic effect of lattice grid structure with friction pendulum bearings under the earthquake impact of various dimensions. Int J Steel Struct. 2014;14(4):777–784.
- Cao Z, Du P, Chen Z, et al. The stability and stressed skin effect analyses of an 80 m diameter single-layer latticed dome with bolt-ball joints. Int J Steel Struct. 2016;16(2):279–288.
- Queheillalt DT, Wadley HNG. Titanium alloy lattice truss structures. Mater Des. 2009;30(6):1966–1975.
- Lei S, Liu W. High-speed machining of titanium alloys using the driven rotary tool. Int J Mach Tool Manu. 2002;42(6):653–661.
- Sidambe AT, Figueroa IA, Hamilton HGC, et al. Metal injection moulding of CP-Ti components for biomedical applications. J Mater Process Technol. 2012;212(7):1591–1597.
- Scott Weil K, Nyberg E, Simmons K. A new binder for powder injection molding titanium and other reactive metals. J Mater Process Technol. 2006;176(1):205–209.
- German RM. Progress in titanium metal powder injection molding. Mater. 2013;6(8):3641–3662.
- Froes FHS. Advances in titanium metal injection molding. Powder Metall Met Ceram. 2007;46(5):303–310.
- Shibo G, Xuanhui Q, Xinbo H, et al. Powder injection molding of Ti–6Al–4V alloy. J Mater Process Technol. 2006;173(3):310–314.
- Lin D, Chung ST, Kwon YS, et al. Preparation of Ti-6Al-4V feedstock for titanium powder injection molding. J Mater Process Technol. 2016;30(4):1859–1864.
- Guo S, Duan B, He X, et al. Powder injection molding of pure titanium. Rare Met. 2009;28(3):261–265.
- Qu XH, Guo SB, Tang CF, et al. Powder injection molding of Ti6Al4V alloy. Mater Sci Forum. 2007;539–543:2639–2644.
- Yan M, Xu W, Dargusch MS, et al. Review of effect of oxygen on room temperature ductility of titanium and titanium alloys. Powder Metall. 2014;57(4):251–257.
- Steedman G, Corbin SF. Determining sintering mechanisms and rate of in situ homogenisation during master alloy sintering of Ti6Al4V. Powder Metall. 2015;58(1):67–80.
- Wang H, Fang Z, Sun P. A critical review of mechanical properties of powder metallurgy titanium. Int J Powder Metall. 2010;46:45–57.
- Bolzoni L, Ruiz-Navas EM, Gordo E. Powder metallurgy CP-Ti performances: Hydride–dehydride vs. sponge. Mater Des. 2014;60:226–232.
- Bolzoni L, Ruiz-Navas EM, Gordo E. Flexural properties, thermal conductivity and electrical resistivity of prealloyed and master alloy addition powder metallurgy Ti–6Al–4V. Mater Des. 2013;52:888–895.
- Lütjering G. Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys. Mater Sci Eng A. 1998;243(1–2):32–45.
- Kim Y, Song Y-B, Lee SH. Microstructure and intermediate-temperature mechanical properties of powder metallurgy Ti–6Al–4V alloy prepared by the prealloyed approach. J Alloys Compd 2015;637:234–241.