References
- JA Picas, Y Xiong, M Punset, et al. Microstructure and wear resistance of WC-Co by three consolidation processing techniques. Int. J. Refract. Met. Hard Mat. 2009;27(2):344–349.
- A Fortunato, G Valli, Erica Liverani, et al. Additive manufacturing of WC-Co cutting tools for gear production. Lasers Manuf Mater Process. 2019;6:247–262.
- Y Yang, C Zhang, D Wang, et al. Additive manufacturing of WC-Co hardmetals: a review. Int J Adv Manuf Tech. 2020;108:1653–1673.
- SW Kim, SI Lee, YD Kim, et al. High temperature compressive deformation and fracture characteristics of the activated sintered W-Ni compacts. Int J Refract Metals Hard Mater. 2003;21:183–192.
- DQ Zhang, ZH Liu, QZ Cai, et al. Influence of Ni content on microstructure of W-Ni alloy produced by selective laser melting. Int J Refract Met H. 2014;45:15–22.
- E Yarrapareddy, S Zekovic, S Hamid, et al. The development of nickel-tungsten carbide functionally graded materials by a laser-based direct metal deposition process for industrial slurry erosion applications. J Eng Manuf. 2006;220:1923–1936.
- F Luo, A Cockburn, M Sparkes, et al. Performance characterization of Ni60-WC coating on steel processed with supersonic laser deposition. Def Technol. 2015;11:35–47.
- M Zhong, W Liu, G Ning, et al. Laser direct manufacturing of tungsten nickel collimation component. Mater Process Technol. 2004;147:167–173.
- G-Y Wang, S-N Gu, S Yang Microstructure and properties of tungsten heavy alloys fabricated by laser direct deposition. Mater Sci Technol. 2017;33:415–420.
- C Li, S Ma, X Liu, et al. Microstructures and properties of 80W-20Fe alloys prepared using laser melting deposition process. Int J Refract Met Hard Mater. 2018;77:113–119.
- C Zhang, F Chen, Z Huang, et al. Additive manufacturing of functionally graded materials: A review. Mater. Sci. Eng. A. 2019;764:138209.
- R Rahmani, M Brojan, M Antonov, et al. Perspectives of metal-diamond composites additive manufacturing using SLM-SPS and other techniques for increased wear-impact resistance. Int J Refract Met Hard Mater. 2020;88:105192.
- MS Pham, C Liu, I Todd, et al. Damage-tolerant architected materials inspired by crystal microstructure. Nature. 2019;565:305–311.
- R Rahmani, M Antonov, L Kollo Selective laser melting of diamond-containing or postnitrided materials intended for impact-abrasive conditions: experimental and analytical study. Adv Mater Sci Eng. 2019;2019:1–11.
- R Rahmani, M Antonov, L Kollo. Wear Resistance of (Diamond-Ni)-Ti6Al4 V Gradient materials prepared by combined selective laser melting and spark plasma sintering techniques. Adv Tribol. 2019;2019:1–12.
- CA Schneider, WS Rasband, KW Eliceiri NIH image to ImageJ: 25 years of image analysis. Nat Methods. 2012;9:671–675.
- KH Lin, CS Hsu, ST Lin Precipitation of an intermetallic phase in Mo-alloyed tungsten heavy alloys. Mater Trans. 2003;44:358–336.
- M Tang, Y Du, P Zhou, et al. Experimental phase diagram, thermodynamic modeling and solidified microstructure in the Mo-Ni-W ternary system. Calphad. 2020;68:101748.
- D Shu, Z Li, Z Zhang, et al. Phase constituents and growth mechanism of laser in situ synthesized WC reinforced composite coating with W-C-Ni system. J Mater Res. 2017;32:557–565.