References
- Pasupathy M, Martín JM, Rivas A, et al. Effect of the solidification time on the median particle size of powders produced by water atomisation. Powder Metall. 2016;59:128–141. doi:https://doi.org/10.1080/00325899.2015.1117693.
- PM industry roadmap - Technology update for the powder metallurgy industry, 2017. Available from: https://www.mpif.org/Portals/1/Docs/Market/2017-Roadmap.pdf.
- Grandzol RJ, Tallmadge JA. Water jet atomization of molten steel. AIChE J. 1973;19:1149–1158. doi:https://doi.org/10.1002/aic.690190611.
- Neikov OD. Handbook of non-ferrous metal powders technologies and applications. Elsevier; 2009. p. 102–142.
- Dawes J, Bowerman R, Trepleton R. Introduction to the additive manufacturing powder metallurgy supply chain. Johnson Matthey Technol Rev. 2015;59:243–256. doi:https://doi.org/10.1595/205651315X688686.
- Seki Y, Okamoto S, Takigawa H, et al. Effect of atomization variables on powder characteristics in the high-pressured water atomization process. Met Powder Rep. 1990;45:38–40. doi:https://doi.org/10.1016/S0026-0657(10)80014-1.
- Yenwiset S, Yenwiset T. Effect of the molten metal stream’s shape on particle size distribution of water atomized metal powder. Eng J. 2016;20:187–196. doi:https://doi.org/10.4186/ej.2016.20.1.187.
- Dunkley JJ, Palmer JD. Factors affecting particle size of atomized metal powders. Powder Metall. 1986;29:287–290. doi:https://doi.org/10.1179/pom.1986.29.4.287.
- Small TJ, Bruce S. The comparison of characteristics of water and inert gas atomized powders. Int J Powder Metall. 1968;4:7–17.
- H. Kishidaka, No title, in: Proc Multidiscip Meet ‘Sintered Met Magn Prop, Jpn Soc Powder Powder Metall. 1972:pp. 19–24.
- Ternovoi YF, Nichiporenko OS. Process of dispersing a molten jet by an annular stream of high-pressure water. I. Hydrodynamic model of molten jet transformation into droplets. Powder Metall Met Ceram. 1993;32:1–6. doi:https://doi.org/10.1007/BF00559724.
- Ternovoi YF, Nichiporenko OS, Makogon VN, et al. Process of dispersing a molten jet by an annular stream of high-pressure water. II. Experimental studies, semiempirical model for predicting powder particle-size composition. Powder Metall Met Ceram. 1993;32:99–102. doi:https://doi.org/10.1007/BF00560029.
- Bergquist B. New insights into influencing variables of water atomisation of iron. Powder Metall. 1999;42:331–343. doi:https://doi.org/10.1179/003258999665684.
- Liu YZ, Li YY. A new general equation of mean particle size for different atomization processes. Mater Sci Forum. 2009;534:1–4.
- Persson F, Eliasson A, Jönsson P. Prediction of particle size for water atomised metal powders: parameter study. Powder Metall. 2012;55:45–53. doi:https://doi.org/10.1179/1743290111Y.0000000016.
- Rothe PH, Block JA. Aerodynamic behavior of liquid sprays. Int J Multiph Flow. 1977;3:263–272. doi:https://doi.org/10.1016/0301-9322(77)90006-4.
- MacGregor SA. Air entrainment in spray jets. Int J Heat Fluid Flow. 1991;12:279–283.
- Ghosh S, Hunt JCR. Induced air velocity within droplet driven sprays. Proc - R Soc London. A. 1994;444:105–127. doi:https://doi.org/10.1098/rspa.1994.0007.
- Miller PCH, Butler Ellis MC, Tuck CR. Entrained air and droplet velocities produced by agricultural flat-fan nozzles. At Sprays. 1996;6:693–707. doi:https://doi.org/10.1615/AtomizSpr.v6.i6.40 .
- Abbas AJ, Nasr GG, Burby ML, et al. Entrained air around a high pressure flat jet water spray. ILASS am. 25th Annu. Conf. Liq. At. Spray Syst., Pittsburgh; 2013.
- Asgarian A, Tang Z, Bussmann M, et al. Water atomisation of metal powders: effect of water spray configuration. Powder Metall. 2020;63:288–299. doi:https://doi.org/10.1080/00325899.2020.1802558.
- Altieri A, Cryer SA, Acharya L. Mechanisms, experiment, and theory of liquid sheet breakup and drop size from agricultural nozzles. At Sprays. 2014;24:695–721. doi:https://doi.org/10.1615/atomizspr.2014008779.
- Altieri AL, Cryer SA. Break-up of sprayed emulsions from flat-fan nozzles using a hole kinematics model. Biosyst Eng. 2018;169:104–114. doi:https://doi.org/10.1016/j.biosystemseng.2018.02.006.
- Senecal PK, Schmidt DP, Nouar I, et al. Modeling high-speed viscous liquid sheet atomization. Int J Multiph Flow. 1999;25:1073–1097.
- Dombrowski N, Johns WR. The aerodynamic instability and disintegration of viscous liquid sheets. Chem Eng Sci. 1963;18:203–214.
- Fraser RP, Eisenklam P, Dombrowski N, et al. Drop formation from rapidly moving liquid sheets. AIChE J. 1962;8:672–680. doi:https://doi.org/10.1002/aic.690080522.
- Asgarian A, Heinrich M, Schwarze R, et al. Experiments and modeling of the breakup mechanisms of an attenuating liquid sheet. Int J Multiph Flow. 2020;130(Article 103347). doi:https://doi.org/10.1016/j.ijmultiphaseflow.2020.103347.
- Grandzol RJ, Tallmadge JA. Effect of jet angle on water atomization. Int J Powder Metall Powder Technol. 1975;11:103–114.
- Asgarian A, Alicandri R, Bussmann M, et al. Initial development of an industrial tool to model water atomization of metals. WorldPM 2018, Beijing, China; 2018. p. 25–31. https://www.researchgate.net/publication/331346462_Initial_development_of_an_industrial_tool_to_model_water_atomization_of_metals.
- Pilch M, Erdman CA. Use of breakup time data and velocity history data to predict the maximum size of stable fragments for acceleration-induced breakup of a liquid drop. Int J Multiph Flow. 1987;13:741–757. doi:https://doi.org/10.1016/0301-9322(87)90063-2.
- Mikhailov MD, Silva Freire AP. The drag coefficient of a sphere: an approximation using shanks transform. Powder Technol. 2013;237:432–435. doi:https://doi.org/10.1016/j.powtec.2012.12.033.
- Asgarian A, Yang Z, Tang Z, et al. An image feature consolidation technique (IFCT) to capture multi-range droplet size distributions in atomizing liquid sheets. Exp Fluids. 2020;61:(Article 14), doi:https://doi.org/10.1007/s00348-019-2847-6..
- Castrejón-García R, Castrejón-Pita JR, Martin GD, et al. The shadowgraph imaging technique and its modern application to fluid jets and drops. Rev Mex F´ISICA. 2011;57:266–275. http://www.scielo.org.mx/scielo.php?pid=S0035-001X2011000300016&script=sci_arttext&tlng=pt (accessed June 21, 2019).
- Dunkley JJ. Metal powder atomisation methods for modern manufacturing. Johnson Matthey Technol Rev. 2019;63:226–232. doi:https://doi.org/10.1595/205651319X15583434137356.
- DroPredict. Available from: https://github.com/dropredict/DroPredict; 2019.
- Reitz RD. Atomization and other breakup regimes of a liquid jet. Princeton (NJ): Princeton University; 1978.
- Faeth GM. Structure and atomization properties of dense turbulent sprays. Symp Combust. 1991;23:1345–1352. doi:https://doi.org/10.1016/S0082-0784(06)80399-1.