References
- Dossett och J, Totten G. ASM handbook, volume 04D – heat treating of irons and steels. Materials Park, OH: ASM International; 2014.
- Committee AIH. ASM handbook, volume 01 – properties and selection: irons, steels, and high-performance alloys. Materials Park, OH: ASM International; 1990.
- DebRoy T, Wei H, Zuback J, et al. Additive manufacturing of metallic components – process, structure and properties. Prog Mater Sci. 2018;92:112–224. doi:https://doi.org/10.1016/j.pmatsci.2017.10.001.
- Narvan M, Al-Rubaie och KS, Elbestawi M. Process-structure-property reationships of AISI H13 tool steel processed with selective laser melting. Materials. 2019;12(14):1–20. doi:https://doi.org/10.3390/ma12142284.
- Kempen K, Vrancken B, Buls S, et al. Selective laser melting of crack-free high density M2 high speed steel parts by baseplate preheating. J Manuf Sci Eng. 2014;136(6):1–6. doi:https://doi.org/10.1115/1.4028513.
- Mercelis och P, Kruth J. Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyp J. 2006;12(5): 254–265. doi:https://doi.org/10.1108/13552540610707013.
- Mertens R, Vrancken B, Holmstock N, et al. Influence of powder bed preheating on microstructure and mechanical properties of H13 tool steel SLM parts. Phys Procedia. 2016;83:882–890. doi:https://doi.org/10.1016/j.phpro.2016.08.092.
- Yan J, Zheng D, Li H, et al. Selective laser melting of H13: microstructure and residual stress. J Mater Sci. 2017;52(20):12476–12485. doi:https://doi.org/10.1007/s10853-017-1380-3.
- Dilip J, Janaki Ram G, Starr och T, et al. Selective laser melting of HY100 steel: process parameters, microstructure and mechanical properties. Addit Manuf. 2017;13:49–60. doi:https://doi.org/10.1016/j.addma.2016.11.003.
- Seede R, Shoukr D, Zhang B, et al. An ultra-high strength martensitic steel fabricated using selective laser melting additive manufacturing: densification, microstructure, and mechanical properties. Acta Mater. 2020;186:199–214. doi:https://doi.org/10.1016/j.actamat.2019.12.037.
- Li X, Hao Tan Y, Willy H, et al. Heterogeneously tempered martensitic high strength steel by selective laser melting and its micro-lattice: processing, microstructure, superior performance and mechanisms. Mater Des. 2019;178:1–13. doi:https://doi.org/10.1016/j.matdes.2019.107881.
- Damon J, Koch R, Kaiser D, et al. Process development and impact of intrinsic heat treatment on the mechanical performance of selective laser melted AISI 4140. Addit Manuf. 2019;28:275–284. doi:https://doi.org/10.1016/j.addma.2019.05.012.
- Wang och W, Kelly S. A metallurgical evaluation of the powder-bed laser additive manufactured 4140 steel material. JOM. 2016;68(3):869–875. doi:https://doi.org/10.1007/s11837-015-1804-y.
- Jamshidinia M, Sadek A, Wang och W, et al. Additive manufacturing of steel alloys using laser powder-bed fusion. Adv Mater Process. 2015;173:20–24.
- Jelis E, Hespos och M, Ravindra N. Process evaluation of AISI 4340 steel manufactured by laser powder bed fusion. J Mater Eng Perform. 2018;27(1):63–71. doi:https://doi.org/10.1007/s11665-017-2989-8.
- Jelis E, Hespos M, Groeschler och S, et al. L-PBF of 4340 low alloy steel: influence of feedstock powder, layer thickness, and machine maintenance. J Mater Eng Perform. 2019;28(2):693–700. doi:https://doi.org/10.1007/s11665-018-3739-2.
- Fayazfar H, Salarian M, Rogalsky A, et al. A critical review of powder-based additive manufacturing of ferrous alloys: process parameters, microstructure and mechanical properties. Mater Des. 2018;144:98–128. doi:https://doi.org/10.1016/j.matdes.2018.02.018.
- du Plessis A, Yadroitsava och I, Yadroitsev I. Effect of defects on mechanical properties in metal additive manufacturing: a review focusing on X-ray tomography insights. Mater Des. 2020;187:108385. doi:https://doi.org/10.1016/j.matdes.2019.108385.
- Hearn W, Hryha E, Bengtsson och S, et al. Processability & microstructure of Fe-C system via L-PBF. EuroPM Proceed. 2019;2019.
- Schneider C, Rasband W, Eliceiri K. NIH image to ImageJ: 25 years of image analysis. Nat Methods. 2012;9(7): 671–675. doi:https://doi.org/10.1038/nmeth.2089.
- Ronneberg T, Davies och C, Hooper P. Revealing relationships between porosity, microstructure and mechanical properties of laser powder bed fusion 316L stainless steel through heat treatment. Mater Des. 2020;189:1–14. doi:https://doi.org/10.1016/j.matdes.2020.108481.
- Tang M, Pistorius och PC, Beuth JL. Prediction of lack-of-fusion porosity for powder bed fusion. Addit Manuf. 2017;14:39–48. doi:https://doi.org/10.1016/j.addma.2016.12.001.
- Cunningham R, Narra S, Montgomery C, et al. Synchrotron-based X-ray microtomography characterization of the effect of processing variables on porosity formation in laser power-bed additive manufacturing of Ti-6Al-4V. JOM. 2017;69(3):479–484. doi:https://doi.org/10.1007/s11837-016-2234-1.
- King W, Barth H, Castillo V, et al. Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing. J Mater Process Technol. 2014;214(12):2915–2925. doi:https://doi.org/10.1016/j.jmatprotec.2014.06.005.
- Bobel A, Hector Jr LG, Chelladurai I, et al. In situ synchrotron X-ray imaging of 4140 steel laser powder bed fusion. Materialia. 2019;6:1–10. doi:https://doi.org/10.1016/j.mtla.2019.100306.
- Krauss G. Tempering of lath martensite in low and medium carbon steels: assessment and challenges. Steel Res Int. 2017;10(88):1–18. doi:https://doi.org/10.1002/srin.201700038.
- Revilla C, Lopez och B, Rodriguez-Ibabe J. Carbide size refinement by controlling the heating rate during induction tempering in low alloy steel. Mater Des. 2014;62:296–304. doi:https://doi.org/10.1016/j.matdes.2014.05.053.
- Kaiser D, de Graff B, Dietrich och S, et al. Investigation of the precipitation kinetics and microstructure evolution of martensitic AISI 4140 steel during tempering with high heating rates. Metall Res Technol. 2018;404(115):1–7. doi:https://doi.org/10.1051/metal/2018026.
- Furuhara T, Kobayashi och K, Maki T. Control of cementite precipitation in lath martensite by rapid heating and tempering. ISIJ Int. 2004;44(11):1937–1944. doi:https://doi.org/10.2355/isijinternational.44.1937.
- Kurnsteiner P, Wilms M, Weisheit A, et al. High-strength Damascus steel by additive manufacturing. Nature. 2020;582(7813):515–519. doi:https://doi.org/10.1038/s41586-020-2409-3.
- Kurnsteiner P, Wilms M, Weisheit A, et al. Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition. Acta Mater. 2017;129:52–60. doi:https://doi.org/10.1016/j.actamat.2017.02.069.