References
- Shokrollahi HEJK, Janghorban K. Soft magnetic composite materials (SMCs). J Mater Process Technol. 2007;189:1–12.
- Maeda T, Tyoda H, Igarashi N. Development of super low iron-loss P/M soft magnetic materials. Sei Tech Rev. 2005;60:3–90.
- Ouyang G, Chen X, Liang Y, et al. Review of Fe-6.5 wt% Si high silicon steel – A promising soft magnetic material for sub-kHz application. J Magn Magn Mater. 2019;481:234–250.
- Hara M, Namba M, Tajima S, et al. Properties of iron core fabricated from flaky-shaped and annealed pure iron powder. Mater Trans. 2018;59:1920–1927.
- David J. Introduction to magnetism and magnetic materials. Boca Raton: CRC Press; 1998. p. 321.
- Hughes JDH. The carbon fibre/epoxy interface – a review. Compos Sci Technol. 1991;41:13–45.
- Yao A, Moriyama R, Hatakeyama T. Iron losses and magnetic-hysteresis properties under gan inverter excitation at high-frequencies. J Magn Soc Jpn. 2020: 2007L002.
- Leary AM, Ohodnicki PR, McHenry ME. Soft magnetic materials in high-frequency, high-power conversion applications. JOM. 2012;64:772–781.
- Silveyra JM, Ferrara E, Huber DL, et al. Soft magnetic materials for a sustainable and electrified world. Science. 2018;362:1–9.
- Suryanarayana C. Mechanical alloying and milling. Prog Mater Sci. 2001;46:1–184.
- Nguyen GMT, Fujisaki K, That LT, et al. Magnetic comparison between experimental flake powder and spherical powder for inductor cores at high frequency. IEEE Trans Magn. 2020;57:1–7.
- Motozuka S, Ikeda T, Miyagawa T, et al. Formation process of the {001} fiber texture on iron particles using simple ball milling. Powder Technol. 2017;321:9–12.
- Thomason JL, Vlug MA. Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: 1. Tensile and flexural modulus. Composites. 1996;28:277–288.
- Sang J, Aisawa S, Miura K, et al. Adhesion of carbon steel and natural rubber by functionalized silane coupling agents. Int J Adhes Adhes. 2017;72:70–74.
- Yamabe H, Amano S, Fujiwara T. A study of surface modification of stainless steels (III). J Jpn Soc Colour Mater. 1997;70:763–771.
- Zhu W, Xiao H, Wang J, et al. Effect of coupling agent quantity on composite interface structure and properties of fiber metal laminates. Polym Compos. 2021;42:3195–3205.
- Islam MA, Sato N, Tomota Y. Tensile and plane bending fatigue properties of pure iron and iron-phosphorus alloys at room temperature in the air. Trans Indian Inst Met. 2011;64:315–320.
- Hearn EJ. Mechanics of materials. 3rd ed. Amsterdam: Elsevier Science; 1997. p. 62–88.