References
- Baselli S, Molinari A. A dilatometry study of the influence of green density on anisothermal and isothermal shrinkage of plain iron green parts. Powder Metall. 2020;63(3):155–162.
- Baselli S, Torresani E, Zago M, et al. Sintering shrinkage of uniaxial cold compacted iron: influence of the microstructure on the anisothermal and isothermal shrinkage of uniaxial cold-compacted iron. Powder Metall. 2018;61(4):276–284.
- Torresani E, Giuntini D, Zhu C, et al. Anisotropy of mass transfer during sintering of powder materials with pore–particle structure orientation. Metall Mater Trans A. 2019;50:1033–1049.
- Wendel J, Manchili SK, Hryha E, et al. Sintering behaviour of compacted water atomised iron powders: effect of initial state and processing conditions. Powder Metall. 2020;63(5):338–348.
- Smoluchowski R. Theory of grain boundary diffusion. Phys Rev. 1952;87:482–487.
- Shima Y, Ishikawa Y, Nitta H, et al. Self-diffusion along dislocations in ultra high purity iron. Mater Trans. 2002:43:173–43177.
- Baselli S, Molinari A. Sintering shrinkage of uniaxial cold compacted iron: a new shrinkage kinetic equation accounting for the microstructure of the Green parts. Powder Metall. 2019;62(1):1–7.
- Woon IH, Mon DH. Sintering kinetics analysis by dilatometric data obtained at different heating rates. In: Stojnovic, et al., editor. Advanced science and technology of sintering. New York (NY): Klower Academic Plenum Publishers; 1989. p. 41–54.
- Liu ZY, Loh NH, Khor KA, et al. Sinter activation energy of PIM 316L stainless steel. Scr Mater. 2001;44:1131–1137.
- Blaine DG, Gurosik JD, Park SJ, et al. Master sintering curve concepts as applied to the sintering of molybdenum. Metall Mater Trans A. 2006;37:715–720.
- Danninger H, Gierl C, Mühlbauer G, et al. Thermophysical properties of sintered steels: effect of porosity. Int J Powder Metall. 2011;47(3):31–42.
- Danninger H. Asymmetrical ferrite-austenite transformation during vacuum sintering of plain iron compacts. Powder Metall Progr. 2003;3(2):75–85.
- Iijima Y. Diffusion in high-purity iron: influence of magnetic transformation on diffusion. J Phase Eq Diffus. 2005;26:466–471.
- Sha W. Determination of activation energy of phase transformation and recrystallization using a modified Kissinger method. Metall Mater Trans A. 2001;32:2903–2904.
- Shin DH, Kim BC, Park K, et al. Microstructural changes in equal channel angular pressed low carbon steel by static annealing. Acta Mater. 2000;48(12):3245–3252.
- Molinari A, Zago M, Amirabdollahian S, et al. Effect of geometry and Green density on the anisotropic sintering shrinkage of axisymmetric iron parts. Powder Metall. 2018;61(4):267–275.