Sintering anisotropy of binder jetted 316L stainless steel: part I – sintering anisotropy

References

• ASTM International. ISO/ASTM52900-15 Standard terminology for additive manufacturing – general principles – terminology. West Conshohocken (PA): ASTM International; 2015.
   Google Scholar
• Dudina DV, Bokhonov BB, Olevsky EA. Fabrication of porous materials by spark plasma sintering: A review. Materials (Basel). 2019;12:541.
   PubMed Web of Science ®Google Scholar
• Wendel J, Manchili SK, Hryha E, et al. Sintering behaviour of compacted water-atomised iron powder: effect of initial state and processing conditions. Powder Metall. 2020;63:338–348.
   Web of Science ®Google Scholar
• Molinari A, Menapace C, Torresani E, et al. Working hypothesis for origin of anisotropic sintering shrinkage caused by prior uniaxial cold compaction. Powder Metall. 2013;56:189–195.
   Web of Science ®Google Scholar
• Mostafaei A, Elliott AM, Barnes JE, et al. Binder jet 3D printing – process parameters, materials, properties, and challenges. Prog Mater Sci. 2020;119:100707.
   Web of Science ®Google Scholar
• Zavaliangos A, Missiaen JM, Bouvard D. Anisotropy in shrinkage during sintering. Sci Sinter. 2006;38:13–25.
   Web of Science ®Google Scholar
• Hugonnet B, Missiaen JM, Martin CL, et al. Effect of contact alignment on shrinkage anisotropy during sintering: stereological model, discrete element model and experiments on NdFeB compacts. Mater Des. 2020;191:108575.
   Web of Science ®Google Scholar
• Oh JW, Nahm S, Kim B, et al. Anisotropy in green body bending strength due to additive direction in the binder-jetting additive manufacturing process. Korean J Met Mater. 2019;57:227–235.
   Web of Science ®Google Scholar
• Lecis N, Mariani M, Beltrami R, et al. Effects of process parameters, debinding and sintering on the microstructure of 316L stainless steel produced by binder jetting. Mat Sci and Eng A. 2021;828:142108.
   Web of Science ®Google Scholar
• Barthel B, Hein SB, Aumund-Kopp C, et al. Influence of particle size distribution in Metal Binder Jetting – effects on the properties of green and sintered parts. Procedia EuroPM 2019: International Powder Metallurgy Congress and Exhibition 2019.
   Google Scholar
• Mostafaei A, Rodriguez De Vecchis P, Nettleship I, et al. Effect of powder size distribution on densification and microstructural evolution of binder-jet 3D-printed alloy 625. Mater Des. 2019;162:375–383.
   Web of Science ®Google Scholar
• Zago M, Lecis NFM, Vedani M, et al. Dimensional and geometrical precision of parts produced by binder jetting process as affected by the anisotropic shrinkage on sintering. Addit Manuf. 2021;43:102007.
   Web of Science ®Google Scholar
• Li M, Du W, Elwany A, et al. Metal Binder Jetting additive manufacturing: a literature review. J Manuf Sci Eng. 2020;142:1–17.
   Web of Science ®Google Scholar
• Lee Y, Nandwana P, Simunovic S. Powder spreading, densification, and part deformation in binder jetting additive manufacturing. Prog Addit Manuf. 2021.
   Google Scholar
• Huber D, Vogel L, Fischer A. The effects of sintering temperature and hold time on densification, mechanical properties and microstructural characteristics of binder jet 3D printed 17-4 PH stainless steel. Addit Manuf. 2021;46:102114.
   Web of Science ®Google Scholar
• Ziaee M, Tridas EM, Crane NB. Binder-Jet printing of fine stainless steel powder with varied final density. JOM. 2017;69:592–596.
   Web of Science ®Google Scholar
• Cabo Rios A, Hryha E, Olevsky E, et al. Sintering anisotropy of binder jetted 316L stainless steel: part II –microstructure evolution during sintering. Powder Metall. 2021.
   Web of Science ®Google Scholar
• Vagnon A, Lame O, Bouvard D, et al. Deformation of steel powder compacts during sintering: correlation between macroscopic measurement and in situ microtomography analysis. Acta Mater. 2006;54:513–522.
   Web of Science ®Google Scholar
• Zhu Y, Wu Z, Hartley WD, et al. Unraveling pore evolution in post-processing of binder jetting materials: X-ray computed tomography, computer vision, and machine learning. Addit Manuf. 2020;34:101183.
   Web of Science ®Google Scholar
• Wheat E, Shanbhag G, Vlasea M. The master sinter curve and its application to binder jetting additive manufacturing. J Manuf Sci Eng, Trans ASME. 2020;142:30–32.
   Web of Science ®Google Scholar
• Frykholm R, Takeda Y, Andersson BG, et al. Solid state sintered 3-D printing component by using inkjet (binder) method. J Japan Soc Powder Powder Metall. 2016;63:421–426.
   Google Scholar
• Berginc B, Kampus Z, Sustarsic B. Influence of feedstock characteristics and process parameters on properties of MIM parts made of 316L. Powder Metall. 2007;50:172–183.
   Web of Science ®Google Scholar
• Choi JP, Lee GY, Song Ji, et al. Sintering behavior of 316L stainless steel micro-nanopowder compact fabricated by powder injection molding. Powder Tech. 2015;279:196–202.
   Web of Science ®Google Scholar
• German RM. Sintering trajectories: description on how density, surface area, and grain size change. J Mat. 2016;68:878–884.
   Google Scholar
• Verlee B, Dormal T, Lecomte-Beckers J. Density and porosity control of sintered 316 l stainless steel parts produced by additive manufacturing. Powder Metall. 2012;55:260–267.
   Web of Science ®Google Scholar
• German RM. Sintering: from empirical observations to scientific principles. Elsevier; 2014. 6, Geometric Trajectories during Sintering. p. 141–181.
   Google Scholar