References
- Huang CA, Hsu CC, Kuo HH. The surface characteristics of P/M high-speed steel (ASP 23) multi-cut with wire electrical discharge machine (WEDM). J Mater Process Technol. 2003;140(1–3):298–302.
- Chang SH, Chang HC, Huang KT. Evaluation of the strengthening mechanism and mechanical properties of high alloyed PM 23-NbC-TaC composite materials through vacuum sintering, sub-zero and heat treatments. Vacuum. 2021;187:110132.
- Uddeholm Vanadis®23 SuperClean. 2021 [cited 2021 July 6]. Available from: https://www.uddeholm.com/files/PB_Uddeholm_vanadis_23_english.pdf.
- Gordo E, Velasco F, Antón N, et al. Wear mechanisms in high speed steel reinforced with (NbC)p and (TaC)p MMCs. Wear. 2000;239(2):251–259.
- Huang KT, Chang SH, Hsieh PC. Microstructure, mechanical properties and corrosion behavior of NbC modified AISI 440C stainless steel by vacuum sintering and heat treatments. J Alloy Compd. 2017;712:760–767.
- Chang SH, Lee KY, Huang KT, et al. Evaluation of the microstructure and properties of Cr3C2 powders added to Vanadis 4 alloy steel via vacuum sintering and heat treatments. Kovove Mater. 2019;57(5):317–327.
- Tian HX, Zhang MY, Peng YB, et al. Sintering behavior and mechanical properties of Cr3C2 doped ultra-fine WC-Co cemented carbides: experment guided with thermodynamic calculations. Int J Refract Hard Met. 2019;78:240–246.
- Chen M, Xiao X, Zhang XF, et al. Effect of Cr3C2 on the microstructure and properties of TiWMoC-based cermets. Mater Res Express. 2019;6(7):076533.
- Siwak P, Garbiec D, Rogalewicz M. The effect of Cr3C2 and TaC additives on microstructure, hardness and fracture toughness of WC-6Co tool material fabricated by spark plasma sintering. Mater Res. 2017;20(3):780–785.
- Siwak P, Garbuec D. Microstructure and mechanical properties of WC-Co, WC-Co-Cr3C2 and WC-Co-TaC cermets fabricated by spark plasma sintering. Trans Nonferrous Met Soc China. 2016;26(10):2641–2646.
- Buitrago JDR, Plazas AFG, Quintero LKH. Influence of TiC and Cr3C2 additions on the mechanical properties of a (W-Ti-Cr)C-Co sintered hardmetal. J Mater Res Technol. 2019;8(6):5736–5744.
- Merwe RVD, Sacks N. Effect of TaC and TiC on the friction and dry sliding wear of WC-6 wt.% Co cemented carbides against steel counterfaces. Int J Refract Hard Met. 2013;41:94–102.
- Qiao ZH, Räthel J, Berger LM, et al. Investigation of binderless WC-TiC-Cr3C2 hard materials prepared by spark plasma sintering (SPS). Int J Refract Hard Met. 2013;38:7–14.
- Chang SH, Huang GL, Huang KT. Investigation of the strengthening mechanism and corrosion behaviours of Vanadis 4 extra tool steel adding ZrC-TiC powders through vacuum sintering and sub-zero and heat treatments. Powder Metall. 2020;63:104–115.
- Nanesa HG, Jahazi M. Alternative phase transformation path in cryogenically treated AISI D2 tool steel. Mater Sci Eng A. 2015;634:32–36.
- Arslan FK, Altinsoy I, Hatman A, et al. Characterization of cryogenic heat treated Vanadis 4 PM cold work tool steel. Vacuum. 2011;86 (4):370–373.
- Chang SH, Yeh PT, Huang KT. Microstructures, mechanical properties and corrosion behaviors of NbC added to Vanadis 4 tool steel via vacuum sintering and heat treatments. Vacuum. 2017;142:123–130.
- Chang SH, Chuang CY, Huang KT. Mechanical properties and microstructures of Mo2C strengthened Vanadis 4 extra alloy steel by powder metallurgy and heat treatments. ISIJ Int. 2019;59:1351–1361.
- Das D, Dutta AK, Ray KH. Sub-zero treatments of AISI D2 steel: part I. Microstructure and hardness. Master Sci Eng A. 2010;527 (9):2182–2193.
- Ďurica J, Ptačinová J, Dománková M, et al. Changes in microstructure of ledeburitic tool steel due to vacuum austenitizing and quenching, sub-zero treatments at −140°C and tempering. Vacuum. 2019;170:108977.
- Jovičevič-Klug P, Puš G, Jovičevič-Klug M, et al. Influence of heat treatment parameters on effectiveness of deep cryogenic treatment on properties of high-speed steels. Master Sci Eng A. 2022;829:142157.
- Serna MM, Rossi JL. MC complex carbide in AISI M2 high-speed steel. Mater Lett. 2009;63(8):691–693.
- Jurči P, Dománková M, Hudáková M, et al. Characterization of microstructure and tempering response of conventionally quenched, short- and long-time sub-zero treated PM Vanadis 6 ledeburitic tool steel. Mater Character. 2017;134:398–415.
- Gallister JRWD, Rethwisch DG. X-ray diffraction determination of crystal structure. In Gallister JRWD and Rethisch DG (ediors). Materials science and engineering. 10th ed. John Wiley & Sons (Asia) Pte Ltd; 2020. p. 84–85.