Study of mechanical and tribological properties of Ti–6Al–4V alloy fabricated by powder bed fusion laser beam

References

• Kaschel FR, Vijayaraghavan RK, Shmeliov A, et al. Mechanism of stress relaxation and phase transformation in additively manufactured Ti-6Al-4V via in situ high temperature XRD and TEM analyses. Acta Mater. 2020;188:720–732.
   Web of Science ®Google Scholar
• Li F, Guo B. Effect of different lubricants on microstructural and tribological properties of TC21 titanium alloy against Si3N4 under fretting-reciprocating sliding. J Alloys Compd. 2018;743:576–585.
   Web of Science ®Google Scholar
• Ju J, Zhou Y, Wang K, et al. Tribological investigation of additive manufacturing medical Ti6Al4V alloys against Al2O3 ceramic balls in artificial saliva. J Mech Behav Biomed Mater. 2020;104:103602.
   PubMed Web of Science ®Google Scholar
• Zhang C, Pan Y, Sun JZ, et al. A net-shape forming process of Ti-6Al-4V sphere joints. Powder Metall. 2021;64:404–411.
   Web of Science ®Google Scholar
• Karayel E, Bozkurt Y. Additive manufacturing method and different welding applications. J Mater Res Technol. 2020;9:11424–11438.
   Google Scholar
• Duan SY, Zhan XH, Wu MY, et al. Analysis of elements non-uniform distribution of FeCoCrNi high-entropy alloy coatings on Ti-6Al-4V surface by laser cladding. Met Mater Int. 2021;27:467–480.
   Web of Science ®Google Scholar
• Zhou HX, Li CX, Yang H, et al. Pores structure change induced by heat treatment in cold-sprayed Ti6Al4V coating. Therm Spray Technol. 2019;28:1199–1211.
   Web of Science ®Google Scholar
• Liu Y, Meng JH, Zhu L, et al. Dynamic compressive properties and underlying failure mechanisms of selective laser melted Ti-6Al-4V alloy under high temperature and strain rate conditions. Addit Manuf. 2022;54:102772.
   Web of Science ®Google Scholar
• Cao F, Zhang TT, Ryder MA, et al. A review of the fatigue properties of additively manufactured Ti-6Al-4V. JOM. 2018;70:349–357.
   Web of Science ®Google Scholar
• Lu PP, Wu MP, Liu X, et al. Study on corrosion resistance and bio-tribological behavior of porous structure based on the SLM manufactured medical Ti6Al4V. Met Mater Int. 2020;26:1182–1191. DOI:10.1007/s12540-019-00506-w.
   Web of Science ®Google Scholar
• Meng L, Gao J, Yue J, et al. Stress-based fatigue behavior of Ti-6Al-4V alloy with a discontinuous lamellar microstructure fabricated by thermomechanical powder consolidation. Mater Sci Eng A. 2020;798:140085.
   Web of Science ®Google Scholar
• Zhu S, Guo Y, Ruan Q, et al. Formation of adiabatic shear band within Ti-6Al-4V: An in-situ study with high-speed photography and temperature measurement. Int J Mech Sci. 2020;171:105401.
   Web of Science ®Google Scholar
• Lu JZ, Lu HF, Xu X, et al. High-performance integrated additive manufacturing with laser shock peening –induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components. Int J Mach Tools Manuf. 2020;148:103475.
   Web of Science ®Google Scholar
• Kumar P, Prakash O, Ramamurty U. Micro-and meso-structures and their influence on mechanical properties of selectively laser melted Ti-6Al-4V. Acta Mater. 2018;154:246–260.
   Web of Science ®Google Scholar
• Su C, Yu H, Wang Z, et al. Controlling the tensile and fatigue properties of selective laser melted Ti-6Al-4V alloy by post treatment. J Alloys Compd. 2021;857:157552.
   Web of Science ®Google Scholar
• Zhao YF, Koizumi Y, Aoyagi K, et al. Molten pool behavior and effect of fluid flow on solidification conditions in selective electron beam melting (SEBM) of a biomedical Co-Cr-Mo alloy. Addit Manuf. 2019;26:202–214.
   Web of Science ®Google Scholar
• Sun M, Chen SY, Wei MW, et al. Microstructure and properties of high power-SLM 24CrNiMoY alloy steel at different laser energy density and tempering temperature. Powder Metall. 2020;64:1–12.
   Web of Science ®Google Scholar
• Attar H, Ehtemam-Haghighi S, Kent D, et al. Comparative study of commercially pure titanium produced by laser engineered net shaping, selective laser melting and casting processes. Mater Sci Eng A. 2017;705:385–393.
   Web of Science ®Google Scholar
• Bartolomeu F, Buciumeanu M, Pinto E, et al. Wear behavior of Ti6Al4V biomedical alloys processed by selective laser melting, hot pressing and conventional casting. Trans Nonferrous Metals Soc China. 2017;27:829–838.
   Web of Science ®Google Scholar
• Khorasani AM, Gibson I, Awan US, et al. The effect of SLM process parameters on density, hardness, tensile strength and surface quality of Ti-6Al-4V. Addit Manuf. 2019;25:176–186.
   Web of Science ®Google Scholar
• Chen J, Zhang CH, Zhou FQ, et al. Microstructural, electrochemical and wear-corrosion characterization of TI-6AL-4V-5Cu alloy fabricated by selective laser melting. J Alloys Compd. 2021;874:159953.
   Web of Science ®Google Scholar
• He YX, Ma Y, Zhang WH, et al. Effects of build direction on thermal exposure and creep performance of SLM Ti6Al4V titanium alloy. Eng Fail Anal. 2022;135:106063.
   Web of Science ®Google Scholar
• Park S, Kang MC, Oinam YC, et al. Measurement of skeletal density and porosity of construction materials using a new proposed vacuum pycnometer. Measurement (Mahwah N J). 2022;196:111209.
   Google Scholar
• Lu PP, Wu MP, Liu X, et al. Synergistic enhancement of Re/B4C on cobalt-based composite coatings: evolution of microstructure, microhardness and tribological properties. Surf Coat Technol. 2021;425:127663.
   Web of Science ®Google Scholar
• Dusza J, Csanádi T, Medveď DR, et al. Nanoindentation and tribology of a (Hf-Ta-Zr-Nb-Ti)C high-entropy carbide. J Eur Ceram Soc. 2021;41:5417–5426.
   Web of Science ®Google Scholar