References
- Wakai F, Chihara K, Yoshida M. Anisotropic shrinkage due to particle rearrangement in sintering. Acta Mater. 2007;55:4553–4566.
- Wakai F, Shinoda Y. Anisotropic sintering stress for sintering of particles arranged in orthotropic symmetry. Acta Mater. 2009;57:3955–3964.
- Wakai F, Akatsu T. Anistropic viscosities and shrinkage rate in sintering of particles arranged in simple orthorhombic structure. Acta Mater. 2010;58:1921–1929.
- Olevsky EA. Theory of sintering: from discrete to continuum. Mater Sci Eng Res. 1998;23:41–100.
- Zavaliangos A, Missiaen JM, Bouvard D. Anisotropy in shrinkage during sintering. Sci Sintering. 2006;38:13–25.
- Zavaliangos A, Bouvard D. Numerical simulation of anisotropy in sintering due to prior compaction. Int J Powder Metall. 2000;36(7):59–65.
- Vagnon A, Lame O, Bouvard D, et al. Deformation of steel compacts during sintering: correlation between macroscopic measurement and in situ microtomography analysis. Acta Mater. 2006;54:513–522.
- Lame O, Bellet D, Di Michiel M, et al. Bulk observation of metal powder sintering by X-ray synchrotron microtomagraphy. Acta Mater. 2004;52:977–984.
- Torresani E, Cristofolini I, Molinari A. Study of the anisotropic microstructure of the uniaxially cold compacted green parts. Adv Powder Metall Part Mater. 2015;3:9–18.
- Baselli S, Torresani E, Zago M, et al. Sintering shrinkage of uniaxial cold compacted iron: influence of the microstructure on the anisothermal and isothermal shrinkage. Powd Metall. 2018;61(4):276–284.
- Shima S, Oyane M.. Plasticity theory for porous metals. Int J Mech Sci 1976;18:285–291.
- Torresani E, Giuntini D, Zhu C, et al. Anisotropy of mass transfer during sintering of powder materials with pore–particle structure orientation. Metall Mater Transl A. 2019;50:1033–1049.
- Kuroki H. Anisotropic springback and shrinkage of iron powder compact. Key Eng Mater. 1989;29:162–164.
- Molinari A, Amirabdollahian S, Cristofolini I. Influence of powder deformation on anisotropy of sintering shrinkage. Adv Powder Metall Part Mater. 2016;1:45–52.
- Zago M, Cristofolini I, Molinari A. New interpretation for the origin of the anisotropic sintering shrinkage of AISI 316L rings based on the anisotropic stress field occurred on uniaxial cold compaction. Powder Metall. 2019;62(2):115–123.
- Molinari A, Zago M, Amirabdollhaian S, et al. From compaction mechanics to sintering shrinkage of rings with different H/(Dext–Dint) ratio. Adv Powder Metall Particulate Mater. 2018;1:81–90.
- Cristofolini I, Molinari A, Zago M, et al. Design for powder metallurgy: predicting anisotropic dimensional change on sintering of real parts. Int J Prec Eng Manuf . 2019;20(4):619–630.
- Cristofolini I, Molinari A, Zago M, et al. Development of a new model describing the anisotropic dimensional change on sintering. Powder Metall. 2022;62(2):89–100.