References
- Rambabu P, Prasad NE, Kutumbarao VV, et al. Aluminum alloys for aerospace applicatiion. Aerosp Mater Mater Technol. 2017;1:29–52.
- Heinz A, Haszler A, Keidel C, et al. Recent development in aluminium alloys for aerospace applications. Mater Sci Eng A. 2000;280:102–107. doi:10.1016/S0921-5093(99)00674-7
- Froes FH. Advanced metals for aerospace and automotive use. Mater Sci Eng A. 1994;184:119–133. doi:10.1016/0921-5093(94)91026-X
- Li Y, Hu A, Fu Y, et al. Al alloys and casting processes for induction motor applications in battery-powered electric vehicles: a review. Metals (Basel). 2022;12:2–25.
- Hirsch J. Aluminium in innovative light-weight car design. Mater Trans. 2011;52:818–824. doi:10.2320/matertrans.L-MZ201132
- Yang S, Knickle H. Design and analysis of aluminum/air battery system for electric vehicles. J Power Sources. 2002;112:162–173. doi:10.1016/S0378-7753(02)00370-1
- Winter T, Robinson J, Sutton M, et al. Structural weight prediction for an urban air mobility concept. Aiaa Aviat 2020 Forum. 2020;2020:1–12.
- Choi HJ, Shin JH, Bae DH. The effect of milling conditions on microstructures and mechanical properties of Al/MWCNT composites. Compos Part A Appl Sci Manuf. 2012;43:1061–1072. doi:10.1016/j.compositesa.2012.02.008
- Choi H, Shin J, Min B, et al. Reinforcing effects of carbon nanotubes in structural aluminum matrix nanocomposites. J Mater Res. 2009;24:2610–2616. doi:10.1557/jmr.2009.0318
- Kim J, Kim D, Choi H. Development of aluminum matrix composites containing nano-carbon materials. J Korean Powder Metall Inst. 2021;28:253–258. doi:10.4150/KPMI.2021.28.3.253
- Nam S, Lee S, Roh A, et al. Role of supersaturated Al-C phases in mechanical properties of Al/fullerene composites. Sci Rep. 2021;11:1–12. doi:10.1038/s41598-020-79139-8
- Yu SH, Shin KS. Fabrication of aluminum/aluminum nitride composites by reactive mechanical alloying. Mater Sci Forum. 2007;534–536:181–184.
- Kollo L, Bradbury CR, Veinthal R, et al. Nano-silicon carbide reinforced aluminium produced by high-energy milling and hot consolidation. Mater Sci Eng A. 2011;528:6606–6615. doi:10.1016/j.msea.2011.05.037
- Li AB, Wang GS, Zhang XX, et al. Enhanced combination of strength and ductility in ultrafine-grained aluminum composites reinforced with high content intragranular nanoparticles. Mater Sci Eng A. 2019;745:10–19. doi:10.1016/j.msea.2018.12.090
- Jahedi M, Mani B, Shakoorian S, et al. Deformation rate effect on the microstructure and mechanical properties of Al-SiC p composites consolidated by hot extrusion. Mater Sci Eng A. 2012;556:23–30. doi:10.1016/j.msea.2012.06.054
- Rofman OV, Prosviryakov AS, Kotov AD, et al. Fabrication of AA2024/SiCp metal matrix composite by mechanical alloying. Met Mater Int. 2022;28:811–822. doi:10.1007/s12540-020-00924-1
- Luo X, Liu Y, Mo Z, et al. Semi-solid powder rolling of AA7050 alloy strips: densification and deformation behaviors. Metall Mater Trans A Phys Metall Mater Sci. 2015;46:2185–2193. doi:10.1007/s11661-015-2795-6
- Shima S, Yamada M. Compaction of metal powder by rolling. Powder Metall. 1984;27:39–44. doi:10.1179/pom.1984.27.1.39
- Ro DH, Toaz MW, Moxson VS. The direct powder-rolling process for producing thin metal strip. JOM J Miner Met Mater Soc. 1983;35:34–39. doi:10.1007/BF03338182
- Lee S-H, Sakai T, Saito Y. Fabrication of Al/Al2O3 particle reinforced metal matrix composite by sheath rolling of powder mixture. Mater Trans. 1998;39:1206–1213. doi:10.2320/matertrans1989.39.1206
- Sakai T, Lee S-H, Saito Y. Consolidation of nitrogen gas atomized aluminum powder by sheath rolling. Mater Trans. 1998;39:1197–1205. doi:10.2320/matertrans1989.39.1197
- Lee S-H, Sakai T, Saito Y. Mechanical properties of (SiC)p/Al composite fabricated by sheath rolling. Mater Trans. 2000;41:256–263. doi:10.2320/matertrans1989.41.256
- Kumaran S, Rao TS, Subramanian R, et al. Nanocrystalline and amorphous structure formation in Ti-Al system during high energy ball milling. Powder Metall. 2005;48:354–357. doi:10.1179/174329005X73829
- Kamrani S, Simchi A, Riedel R, et al. Effect of reinforcement volume fraction on mechanical alloying of Al-SiC nanocomposite powders. Powder Metall. 2007;50:276–282. doi:10.1179/174329007X189621
- Fogagnolo JB, Ruiz-Navas EM, Robert MH, et al. 6061 Al reinforced with silicon nitride particles processed by mechanical milling. Scr Mater. 2002;47:243–248. doi:10.1016/S1359-6462(02)00133-1
- Abdoli H, Farnoush HR, Asgharzadeh H, et al. Effect of high energy ball milling on compressibility of nanostructured composite powder. Powder Metall. 2011;54:24–29. doi:10.1179/003258909X12573447241662
- Al-Aqeeli N, Abdullahi K, Hakeem AS, et al. Synthesis, characterisation and mechanical properties of SiC reinforced Al based nanocomposites processed by MA and SPS. Powder Metall. 2013;56:149–157. doi:10.1179/1743290112Y.0000000029
- Parvin N, Assadifard R, Safarzadeh P, et al. Preparation and mechanical properties of SiC-reinforced Al6061 composite by mechanical alloying. Mater Sci Eng A. 2008;492:134–140. doi:10.1016/j.msea.2008.05.004
- Jabbari Taleghani MA, Ruiz Navas EM, Salehi M, et al. Optimisation of mechanical milling process for production of AA 7075/(SiC or TiB 2) composite powders. Powder Metall. 2012;55:280–286. doi:10.1179/1743290112Y.0000000021
- Jeyasimman D, Sivasankaran S, Sivaprasad K, et al. An investigation of the synthesis, consolidation and mechanical behaviour of Al 6061 nanocomposites reinforced by TiC via mechanical alloying. Mater Des. 2014;57:394–404. doi:10.1016/j.matdes.2013.12.067
- Jeyasimman D, Sivaprasad K, Sivasankaran S, et al. Microstructural observation, consolidation and mechanical behaviour of AA 6061 nanocomposites reinforced by γ-Al2O3 nanoparticles. Adv Powder Technol. 2015;26:139–148. doi:10.1016/j.apt.2014.08.016
- Morsi K, Esawi A. Effect of mechanical alloying time and carbon nanotube (CNT) content on the evolution of aluminum (Al)-CNT composite powders. J Mater Sci. 2007;42:4954–4959. doi:10.1007/s10853-006-0699-y
- Suryanarayana C. Mechanical alloying and milling. Prog Mater Sci. 2001;46:1–184. doi:10.1016/S0079-6425(99)00010-9
- Bembalge OB, Panigrahi SK. Aging behavior of ultrafine-grained AA6063/SiC composites with varying reinforcement sizes. Mater Sci Eng A. 2019;768:138482. doi:10.1016/j.msea.2019.138482
- Williamson GK, Hall WH. X-ray line broadening from filed aluminium and wolfram. Acta Metall. 1953;1:22–31. doi:10.1016/0001-6160(53)90006-6
- Rafea MA, Farag AAM, Roushdy N. Structural and optical characteristics of nano-sized structure of Zn0.5Cd0.5S thin films prepared by dip-coating method. J Alloys Compd. 2009;485:660–666. doi:10.1016/j.jallcom.2009.06.048
- Shakur HR. A detailed study of physical properties of ZnS quantum dots synthesized by reverse micelle method. Phys E. 2011;44:641–646. doi:10.1016/j.physe.2011.10.021
- Immanuel RJ, Panigrahi SK. Influence of cryorolling on microstructure and mechanical properties of a cast hypoeutectic Al-Si alloy. Mater Sci Eng A. 2015;640:424–435. doi:10.1016/j.msea.2015.06.019
- Nayak KC, Date PP. Physical simulation of hot rolling of powder metallurgy-based Al/SiC composite by plane strain multi stage compression. Mater Charact. 2021;173:110954. doi:10.1016/j.matchar.2021.110954