References
- Cornie J, Brancazio D, Williams P, et al. Three dimensional printing: rapid tooling and prototypes directly from a CAD model. J. Eng Indus. 1992;114(4):481–488. doi:10.1016/S0007-8506(07)61035-X.
- Emanuel S, Sachs M, John L, et al. Three-dimensional printing techniques, 1994.
- Ziaee M, Crane NB. Binder jetting: a review of process, materials, and methods. Addit Manuf. 2019;28:781–801.
- Utela B, Storti D, Anderson R, et al. A review of process development steps for new material systems in three dimensional printing (3DP). J Manuf Process. 2008;10(2):96–104.
- Mostafaei A, Elliott AM, Barnes JE, et al. Binder jet 3D printing—process parameters, materials, properties, modeling, and challenges. Prog Mater Sci. 2021;119:100707–100844.
- Mostafaei A, Steven EL, Ference JJ, et al. Binder jetting of a complex-shaped metal partial denture framework. Addit Manuf. 2018;21:63–68.
- Gilmer DB, Han L, Lehmann ML, et al. Additive manufacturing of strong silica sand structures enabled by polyethyleneimine binder. Nat Commun. 2021;12(1):5144–5151.
- Miyanaji H, Momenzadeh N, Yang L. Effect of powder characteristics on parts fabricated via binder jetting process. Rapid Prototyp J. 2019;25(2):332–342.
- Bai Y, Williams CB. An exploration of binder jetting of copper. Rapid Prototyp J. 2015;21(2):177–185.
- Steven M, Emanuel M, Mich Ae CL. Metal parts generation by three dimensional printing, 1992.
- Allen SM, Sachs EM. Three-dimensional printing of metal parts for tooling and other applications. Met Mater. 2000;6(6):589–594.
- Cordero ZC, Siddel DH, Peter WH, et al. Strengthening of ferrous binder jet 3D printed components through bronze infiltration. Addit Manuf. 2017;15:87–92.
- Lu SL, Meenashisundaram GK, Wang P, et al. The combined influence of elevated pre-sintering and subsequent bronze infiltration on the microstructures and mechanical properties of 420 stainless steel additively manufactured via binder jet printing. Addit Manuf. 2020;34:101266–101275.
- Li M, Du WC, Elwany A, et al. Metal binder jetting additive manufacturing: a literature review literature review. J Manuf Sci E-T ASME. 2020;142(9):90801–90845.
- Derby B. Inkjet printing of functional and structural materials: fluid property requirements, feature stability, and resolution. Annu Rev Mater Res. 2010;40(1):395–414.
- Picha K, Spackman C, Samuel J. Droplet spreading characteristics observed during 3D printing of aligned fiber-reinforced soft composites. Addit Manuf. 2016;12:121–131.
- Desmond KW, Weeks ER. Influence of particle size distribution on random close packing of spheres. Phys Rev E Stat Nonlin Soft Matter Phys. 2014;90(2):022204.
- Liu J, Rynerson ML. Blended powder solid-supersolidus liquid phase sintering, 2005.
- McGeary RK. Mechanical packing of spherical particles. J Am Ceram Soc. 1961;44(10):513–522.
- Do T, Kwon P, Shin CS. Process development toward full-density stainless steel parts with binder jetting printing. Int J Mach Tools Manuf. 2017;121:50–60.
- Bai Y, Wagner G, Williams CB. Effect of particle size distribution on powder packing and sintering in binder jetting additive manufacturing of metals. J Manuf Sci E-T ASME. 2017;139(8):81019–81024.
- Godlinski D, Morvan S. Steel parts with tailored material gradients by 3D-printing using nano-particulate ink. Mater Sci Forum. 2005;492-493-493:679–684.
- Coe HG, Pasebani S. Use of bimodal particle size distribution in selective laser melting of 316L stainless steel. J. Manufact Mater Proc. 2020;4(1):8–23.
- Enneti RK, Prough KC. Effect of binder saturation and powder layer thickness on the green strength of the binder jet 3D printing (BJ3DP) WC-12%Co powders. Int J Refract Met Hard Mater. 2019;84:104991–104996.
- Holman RK, Cima MJ, Uhland SA, et al. Spreading and infiltration of inkjet-printed polymer solution droplets on a porous substrate. J Colloid Interface Sci. 2002;249(2):432–440.
- Li Z, He B, Guo Q. Strengthening and hardening mechanisms of additively manufactured stainless steels: the role of cell sizes. Scr Mater. 2020;177:17–21.
- Liu L, Ding Q, Zhong Y, et al. Dislocation network in additive manufactured steel breaks strength–ductility trade-off. Mater Today. 2018;21(4):354–361.
- Semlak KA, Spencer CW, Rhines FN. Rate of capillary rise of liquid metal in a higher melting metal powder compact. JOM. 1957;9:63–64.