Powder flowability characterisation at preheating temperature in additive manufacturing

References

• Gu D, Shi X, Poprawe R, et al. Material-structure-performance integrated laser-metal additive manufacturing. Science. 2021;372(6545):1487. doi:10.1126/science.abg1487
   Web of Science ®Google Scholar
• Hearn W, Harlin P, Hryha E. Development of powder bed fusion – laser beam process for AISI 4140, 4340 and 8620 low-alloy steel. Powder Metall. 2022: 1–13. doi:10.1080/00325899.2022.2134083
   Web of Science ®Google Scholar
• Meng W, Xiaohui Y, Zhang W, et al. Additive manufacturing of a functionally graded material from Inconel625 to Ti6Al4V by laser synchronous preheating. J Mater Process Technol. 2020;275:116368. doi:10.1016/j.jmatprotec.2019.116368
   Web of Science ®Google Scholar
• Arai S, Tsunoda S, Yamaguchi A, et al. Effects of short-glass-fiber content on material and part properties of poly (butylene terephthalate) processed by selective laser sintering. Addit Manuf. 2018;21:683–693. doi:10.1016/j.addma.2018.04.019
   Web of Science ®Google Scholar
• Zhang J, Tan Y, Xiao X, et al. Comparison of roller-spreading and blade-spreading processes in powder-bed additive manufacturing by DEM simulations. Particuology. 2022;66:48–58. doi:10.1016/j.partic.2021.07.005
   Web of Science ®Google Scholar
• Beakawi Al-Hashemi HM, Baghabra Al-Amoudi OS. A review on the angle of repose of granular materials. Powder Technol. 2018;330:397–417. doi:10.1016/j.powtec.2018.02.003
   Web of Science ®Google Scholar
• Vlachos N, Chang ITH. Investigation of flow properties of metal powders from narrow particle size distribution to polydisperse mixtures through an improved Hall-flowmeter. Powder Technol. 2011;205(1-3):71–80. doi:10.1016/j.powtec.2010.08.067
   Web of Science ®Google Scholar
• Carson JW, Wilms H. Development of an international standard for shear testing. Powder Technol. 2006;167(1):1–9. doi:10.1016/j.powtec.2006.04.005
   Web of Science ®Google Scholar
• Koynov S, Glasser B, Muzzio F. Comparison of three rotational shear cell testers: powder flowability and bulk density. Powder Technol. 2015;283:103–112. doi:10.1016/j.powtec.2015.04.027
   Web of Science ®Google Scholar
• Schüssele A, Bauer-Brandl A. Note on the measurement of flowability according to the European pharmacopoeia. Int J Pharm. 2003;257(1-2):301–304. doi:10.1016/S0378-5173(03)00142-X
   PubMed Web of Science ®Google Scholar
• Spierings A, Voegtlin M, Bauer T, et al. Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing. Prog Addit Manuf. 2016;1(1-2):9–20. doi:10.1007/s40964-015-0001-4
   Google Scholar
• Tan Y, Zhang J, Li X, et al. Comprehensive evaluation of powder flowability for additive manufacturing using principal component analysis. Powder Technol. 2021;393:154–164. doi:10.1016/j.powtec.2021.07.069
   Web of Science ®Google Scholar
• Marchetti L, Hulme-Smith C. Flowability of steel and tool steel powders: a comparison between testing methods. Powder Technol. 2021;384:402–413. doi:10.1016/j.powtec.2021.01.074
   Web of Science ®Google Scholar
• Tomasetta I, Barletta D, Poletto M. Correlation of powder flow properties to interparticle interactions at ambient and high temperatures. Particuology. 2014;12:90–99. doi:10.1016/j.partic.2013.02.002
   Web of Science ®Google Scholar
• Tomasetta I, Barletta D, Poletto M. The high temperature annular shear cell: a modified ring shear tester to measure the flow properties of powders at high temperature. Adv Powder Technol. 2013;24(3):609–617. doi:10.1016/j.apt.2012.11.007
   Web of Science ®Google Scholar
• Maarup C, Hjuler K, Dam-Johansen K. High temperature cement raw meal flowability. Powder Technol. 2014;253:686–690. doi:10.1016/j.powtec.2013.12.040
   Web of Science ®Google Scholar
• Krantz M, Zhang H, Zhu J. Characterization of powder flow: static and dynamic testing. Powder Technol. 2009;194(3):239–245. doi:10.1016/j.powtec.2009.05.001
   Web of Science ®Google Scholar
• Capozzi L, Sivo A, Bassini E. Powder spreading and spreadability in the additive manufacturing of metallic materials: a critical review. J Mater Process Technol. 2022;308:117706. doi:10.1016/j.jmatprotec.2022.117706
   Web of Science ®Google Scholar
• Pleass C, Jothi S. Influence of powder characteristics and additive manufacturing process parameters on the microstructure and mechanical behaviour of Inconel 625 fabricated by selective laser melting. Addit Manuf. 2018;24:419–431. doi:10.1016/j.addma.2018.09.023
   Web of Science ®Google Scholar
• Mellmann J. The transverse motion of solids in rotating cylinders – forms of motion and transition behavior. Powder Technol. 2001;118(3):251–270. doi:10.1016/S0032-5910(00)00402-2
   Web of Science ®Google Scholar
• Pirard S, Lumay G, Vandewalle N, et al. Motion of carbon nanotubes in a rotating drum: the dynamic angle of repose and a bed behavior diagram. Chem Eng J. 2009;146(1):143–147. doi:10.1016/j.cej.2008.09.015
   Web of Science ®Google Scholar
• Ripp M, Ripperger S. Influence of temperature on the flow properties of bulk solids. Chem Eng Sci. 2010;65(13):4007–4013. doi:10.1016/j.ces.2010.03.046
   Web of Science ®Google Scholar
• Ruggi D, Lupo M, Sofia D, et al. Flow properties of polymeric powders for selective laser sintering. Powder Technol. 2020;370:288–297. doi:10.1016/j.powtec.2020.05.069
   Web of Science ®Google Scholar
• Liu X, Zhou S, Specht E. Avalanche time of granular flows in rotary kilns. Chem Eng Technol. 2010;33(6):1029–1033. doi:10.1002/ceat.200900533
   Web of Science ®Google Scholar
• Seville JPK, Willett CD, Knight PC. Interparticle forces in fluidisation: a review. Powder Technol. 2000;113(3):261–268. doi:10.1016/S0032-5910(00)00309-0
   Web of Science ®Google Scholar
• Xie H. The role of interparticle forces in the fluidization of fine particles. Powder Technol. 1997;94(2):99–108. doi:10.1016/S0032-5910(97)03270-1
   Web of Science ®Google Scholar
• Ruggi D, Barrès C, Charmeau J, et al. A quantitative approach to assess high temperature flow properties of a PA 12 powder for laser sintering. Addit Manuf. 2020;33:101143. doi:10.1016/j.addma.2020.101143
   Web of Science ®Google Scholar