Analyzing Nonparametric Part-to-Part Variation in Surface Point Cloud Data

References

• Apley, D. W., and Lee, H. Y. (2003), “Identifying Spatial Variation Patterns in Multivariate Manufacturing Processes,” Technometrics, 45, 220–234. DOI: 10.1198/004017003000000041.
   Web of Science ®Google Scholar
• Apley, D. W., and Lee, H. Y. (2010), “Simultaneous Identification of Premodeled and Unmodeled Variation Patterns,” Journal of Quality Technology, 42, 36–51.
   Web of Science ®Google Scholar
• Apley, D. W., and Shi, J. (1998), “Diagnosis of Multiple Fixture Faults in Panel Assembly,” Journal of Manufacturing Science and Engineering, 120, 793–801. DOI: 10.1115/1.2830222.
   Web of Science ®Google Scholar
• Apley, D. W., and Shi, J. (2001), “A Factor-Analysis Method for Diagnosing Variability in Mulitvariate Manufacturing Processes,” Technometrics, 43, 84–95.
   Web of Science ®Google Scholar
• Apley, D. W., and Zhang, F. (2007), “Identifying and Visualizing Nonlinear Variation Patterns in Multivariate Manufacturing Data,” IIE Transactions, 39, 691–701. DOI: 10.1080/07408170600899573.
   Web of Science ®Google Scholar
• Bastani, K., Kong, Z. (J.), Huang, W., and Zhou, Y. (2016), “Compressive Sensing-Based Optimal Sensor Placement and Fault Diagnosis for Multi-Station Assembly Processes,” IIE Transactions, 48, 462–474. DOI: 10.1080/0740817X.2015.1096431.
   Web of Science ®Google Scholar
• Barton, R. R., and Gonzalez-Barreto, D. R. (1996), “Process-Oriented Basis Representations for Mltltivariate Process Diagnostics,” Quality Engineering, 9, 107–118. DOI: 10.1080/08982119608919022.
   Google Scholar
• Bentley, J. L. (1975), “Multidimensional Binary Search Trees Used for Associative Searching,” Communications of the ACM, 18, 509–517. DOI: 10.1145/361002.361007.
   Web of Science ®Google Scholar
• Bui, A. T., and Apley, D. W. (2019), “An Exploratory Analysis Approach for Understanding Variation in Stochastic Textured Surfaces,” Computational Statistics & Data Analysis, 137, 33–50.
   Web of Science ®Google Scholar
• Camelio, J., Hu, S. J., and Zhong, W. (2004), “Diagnosis of Multiple Fixture Faults in Machining Processes Using Designated Component Analysis,” Journal of Manufacturing Systems, 23, 309–315. DOI: 10.1016/S0278-6125(04)80043-8.
   Web of Science ®Google Scholar
• Ceglarek, D., and Shi, J. (1996), “Fixture Failure Diagnosis for Autobody Assembly Using Pattern Recognition,” Journal of Engineering for Industry, 118, 55–66. DOI: 10.1115/1.2803648.
   Web of Science ®Google Scholar
• CloudCompare (2020), “GPL Software Version 2.11 rc1,” available at http://www.cloudcompare.org/.
   Google Scholar
• Colosimo, B. M., and Grasso, M. (2018), “Spatially Weighted PCA for Monitoring Video Image Data with Application to Additive Manufacturing,” Journal of Quality Technology, 50, 391–417. DOI: 10.1080/00224065.2018.1507563.
   Web of Science ®Google Scholar
• Colosimo, B. M., and Pacella, M. (2011), “Analyzing the Effect of Process Parameters on the Shape of 3D Profiles,” Journal of Quality Technology, 43, 169–195. DOI: 10.1080/00224065.2011.11917856.
   Web of Science ®Google Scholar
• del Castillo, E., and Colosimo, B. M. (2011), “Statistical Shape Analysis of Experiments for Manufacturing Processes,” Technometrics, 53, 1–15. DOI: 10.1198/TECH.2010.08194.
   Web of Science ®Google Scholar
• del Castillo, E., Colosimo, B. M., and Tajbakhsh, S. D. (2015), “Geodesic Gaussian Processes for the Parametric Reconstruction of a Free-Form Surface,” Technometrics, 57, 87–99. DOI: 10.1080/00401706.2013.879075.
   Web of Science ®Google Scholar
• Demartines, P., and Hérault, J. (1997), “Curvilinear Component Analysis: A Self-Organizing Neural Network for Nonlinear Mapping of Data Sets,” IEEE Transactions on Neural Networks, 8, 148–154. DOI: 10.1109/72.554199.
   PubMed Web of Science ®Google Scholar
• Ding, Y., Shi, J., and Ceglarek, D. (2002), “Diagnosability Analysis of Multi-Station Manufacturing Processes,” Journal of Dynamic Systems, Measurement, and Control, 124, 1–13. DOI: 10.1115/1.1435645.
   Web of Science ®Google Scholar
• Duin, R. P. W., and Pȩkalska, E. (2012), “The Dissimilarity Space: Bridging Structural and Statistical Pattern Recognition,” Pattern Recognition Letters, Special Issue on Awards from ICPR 2010, 33, 826–832.
   Google Scholar
• Izenman, A. J. (2008), Modern Multivariate Statistical Techniques. Regression, Classification and Manifold Learning, New York: Springer.
   Google Scholar
• Kendall, D. G. (1984), “Shape Manifolds, Procrustean Metrics, and Complex Projective Spaces,” Bulletin of the London Mathematical Society, 16, 81–121. DOI: 10.1112/blms/16.2.81.
   Web of Science ®Google Scholar
• Grasso, M., Colosimo, B. M., and Tsung, F. (2017), “A Phase I Multi-Modelling Approach for Profile Monitoring of Signal Data,” International Journal of Production Research, 55, 4354–4377. DOI: 10.1080/00207543.2016.1251626.
   Web of Science ®Google Scholar
• Goodall, C. (1991), “Procrustes Methods in the Statistical Analysis of Shape,” Journal of the Royal Statistical Society, Series B, 53, 285–339. DOI: 10.1111/j.2517-6161.1991.tb01825.x.
   Google Scholar
• Howard, P., Apley, D. W., and Runger, G. C. (2018a), “Distinct Variation Pattern Discovery Using Alternating Nonlinear Principal Component Analysis,” IEEE Transactions on Neural Networks and Learning Systems, 29, 156–166. DOI: 10.1109/TNNLS.2016.2616145.
   PubMed Web of Science ®Google Scholar
• Howard, P., Apley, D. W., and Runger, G. C. (2018b), “Identifying Nonlinear Variation Patterns With Deep Autoencoders,” IISE Transactions, 50, 1089–1103.
   Web of Science ®Google Scholar
• Johnson, R. A., and Wichern, D. W. (2002), Applied Multivariate Statistical Analysis (Vol. 5, No. 8), Upper Saddle River, NJ: Prentice Hall.
   Google Scholar
• Jones-Farmer, L. A., Woodall, W. H., Steiner, S. H., and Champ, C. W. (2014), “An Overview of Phase I Analysis for Process Improvement and Monitoring,” Journal of Quality Technology, 46, 265–280. DOI: 10.1080/00224065.2014.11917969.
   Web of Science ®Google Scholar
• Lee, H. Y., and Apley, D. W. (2004), “Diagnosing Manufacturing Variation Using Second-Order and Fourth-Order Statistics,” International Journal of Flexible Manufacturing Systems, 16, 45–64. DOI: 10.1023/B:FLEX.0000039172.84756.39.
   Google Scholar
• Lee, J., Son, J., Zhou, S., and Chen, Y. (2020), “Variation Source Identification in Manufacturing Processes Using Bayesian Approach With Sparse Variance Components Prior,” IEEE Transactions on Automation Science and Engineering, 17, 1469–1485.
   Web of Science ®Google Scholar
• McInnes, L., Healy, J., Saul, N., and Großberger, L. (2018), “UMAP: Uniform Manifold Approximation and Projection,” Journal of Open Source Software, 3, 861. DOI: 10.21105/joss.00861.
   Google Scholar
• Pacella, M., and Colosimo, B. M. (2018), “Multilinear Principal Component Analysis for Statistical Modeling of Cylindrical Surfaces: A Case Study,” Quality Technology & Quantitative Management, 15, 507– 525.
   Web of Science ®Google Scholar
• Paynabar, K., Zou, C., and Qiu, P. (2016), “A Change-Point Approach for Phase-I Analysis in Multivariate Profile Monitoring and Diagnosis,” Technometrics, 58, 191–204. DOI: 10.1080/00401706.2015.1042168.
   Web of Science ®Google Scholar
• Runger, G. C., Barton, R. R., del Castillo, E., and Woodall, W. H. (2007), “Optimal Monitoring of Multivariate Data for Fault Patterns,” Journal of Quality Technology, 39, 159–172. DOI: 10.1080/00224065.2007.11917683.
   Web of Science ®Google Scholar
• Sammon, J. W. (1969), “A Nonlinear Mapping for Data Structure Analysis,” IEEE Transactions on Computers, C-18, 401–409. DOI: 10.1109/T-C.1969.222678.
   Web of Science ®Google Scholar
• Shan, X., and Apley, D. W. (2008), “Blind Identification of Manufacturing Variation Patterns by Combining Source Separation Criteria,” Technometrics, 50, 332–343. DOI: 10.1198/004017008000000316.
   Web of Science ®Google Scholar
• Shi, Z., Apley, D. W., and Runger, G. C. (2016), “Discovering the Nature of Variation in Nonlinear Profile Data,” Technometrics, 58, 371–382. DOI: 10.1080/00401706.2015.1049751.
   Web of Science ®Google Scholar
• Shi, Z., Apley, D. W., and Runger, G. C. (2019), “Identifying and Visualizing Part-to-Part Variation With Spatially Dense Optical Dimensional Metrology Data,” Journal of Quality Technology, 51, 3–20.
   Web of Science ®Google Scholar
• Tenenbaum, J. B., de Silva, V., and Langford, J. C. (2000), “A Global Geometric Framework for Nonlinear Dimensionality Reduction,” Science, 290, 2319–2323. DOI: 10.1126/science.290.5500.2319.
   PubMed Web of Science ®Google Scholar
• Tootooni, M. S., Dsouza, A., Donovan, R., Rao, P. K., Kong, Z. (J.), and Borgesen, P. (2017), “Assessing the Geometric Integrity of Additive Manufactured Parts From Point Cloud Data Using Spectral Graph Theoretic Sparse Representation-Based Classification,” in American Society of Mechanical Engineers Digital Collection. DOI: 10.1115/MSEC2017-2794.
   Google Scholar
• Torgerson, W. S. (1952), “Multidimensional Scaling: I. Theory and Method,” Psychometrika, 17, 401–419. DOI: 10.1007/BF02288916.
   Google Scholar
• van der Maaten, L., and Hinton, G. (2008), “Visualizing Data Using t-SNE,” Journal of Machine Learning Research, 9, 2579–2605.
   Web of Science ®Google Scholar
• Wang, Y., Mei, Y., and Paynabar, K. (2018), “Thresholded Multivariate Principal Component Analysis for Phase I Multichannel Profile Monitoring,” Technometrics, 60, 360–372. DOI: 10.1080/00401706.2017.1375993.
   Web of Science ®Google Scholar
• Yan, H., Paynabar, K., and Pacella, M. (2019), “Structured Point Cloud Data Analysis via Regularized Tensor Regression for Process Modeling and Optimization,” Technometrics, 61, 385–395. DOI: 10.1080/00401706.2018.1529628.
   Web of Science ®Google Scholar
• Zang, Y., and Qiu, P. (2018), “Phase I Monitoring of Spatial Surface Data From 3D Printing,” Technometrics, 60, 169–180. DOI: 10.1080/00401706.2017.1321585.
   Web of Science ®Google Scholar
• Zhao, X., and del Castillo, E. (2020), “An Intrinsic Geometrical Approach for Statistical Process Control of Surface and Manifold Data,” Technometrics.
   Web of Science ®Google Scholar