Properties of recycled poly (ethylene terephthalate) (PET)/hyperbranched polyester (HBPET) composite fibers

References

• Abdullah, N., & Ahmad, I. (2013). Potential of using polyester reinforced coconut fiber composites derived from recycling polyethylene terephthalate (PET) waste. Fibers and Polymers, 14, 584–590.10.1007/s12221-013-0584-7
   Web of Science ®Google Scholar
• Barua, S., Dutta, G., & Karak, N. (2013). Glycerol based tough hyperbranched epoxy: Synthesis, statistical optimization and property evaluation. Chemical Engineering Science, 95, 138–147.10.1016/j.ces.2013.03.026
   Web of Science ®Google Scholar
• Baseri, S., Karimi, M., Morshed, M., & Youssefi, M. (2011). Effect of drawing temperature on mesomorphic transitions of oriented poly(ethylene terephthalate) fibers exposed to supercritical CO2. Journal of Polymer Research, 18, 2033–2043.10.1007/s10965-011-9612-8
   Web of Science ®Google Scholar
• Canetti, M., & Bertini, F. (2010). Crystalline and supermolecular structure evolution of poly(ethylene terephthalate) during isothermal crystallization and annealing treatment by means of wide and small angle X-ray investigations. European Polymer Journal, 46, 270–276.10.1016/j.eurpolymj.2009.10.019
   Web of Science ®Google Scholar
• Çetin, E., Karakişla, M., & Saçak, M. (2008). The preparation and characterization of conductive poly (ethylene terephthalate)/polyaniline composite fibers using benzoyl peroxide. Fibers and Polymers, 9, 255–262.
   Web of Science ®Google Scholar
• Chang, C. J., Hsieh, S. R., Wang, C. C., Hung, T. W., & Hsieh, C. C. (2013). Surface-modified long-chain branching hyperbranched polymer for postsurgical anti-adhesion applications. Polymer International, 62, 974–982.10.1002/pi.2013.62.issue-6
   Web of Science ®Google Scholar
• Chang, J. H., Kim, S. J., Joo, Y. L., & Im, S. (2004). Poly(ethylene terephthalate) nanocomposites by in situ interlayer polymerization: The thermo-mechanical properties and morphology of the hybrid fibers. Polymer, 45, 919–926.10.1016/j.polymer.2003.11.037
   Web of Science ®Google Scholar
• Chang, J.-H., Mun, M. K., & Lee, I. C. (2005). Poly(ethylene terephthalate) nanocomposite fibers by in situ polymerization: The thermomechanical properties and morphology. Journal of Applied Polymer Science, 98, 2009–2016.10.1002/(ISSN)1097-4628
   Web of Science ®Google Scholar
• Fernández-Francos, X., Rybak, A., Sekula, R., Ramis, X., Ferrando, F., Okrasa, L., & Serra, A. (2013). Modification of epoxy-anhydride thermosets with a hyperbranched poly(ester amide). II. Thermal, dynamic mechanical, and dielectric properties and thermal reworkability. Journal of Applied Polymer Science, 128, 4001–4013.10.1002/app.v128.6
   Web of Science ®Google Scholar
• Haji, A., & Rahbar, R. S. (2012). Structure evolution and mechanical behavior of poly (ethylene terephthalate) fibers drawn at different number of drawing stages. Chemical Industry & Chemical Engineering Quarterly, 18, 233–243.
   Web of Science ®Google Scholar
• Haji, A., & Semnani Rahbar, R. (2013). Crystallinity and orientation development upon hot multistage drawing of PET multifilament yarn. The Journal of The Textile Institute, 104, 231–238.10.1080/00405000.2012.717377
   Web of Science ®Google Scholar
• He, J.-P., Li, H.-M., Wang, X.-Y., & Gao, Y. (2006). In situ preparation of poly(ethylene terephthalate)–SiO2 nanocomposites. European Polymer Journal, 42, 1128–1134.10.1016/j.eurpolymj.2005.11.002
   Web of Science ®Google Scholar
• Hegde, R. R., Bhat, G. S., & Deshpande, B. (2013). Crystallization kinetics and morphology of melt spun poly(ethylene terephthalate) nanocomposite fibers. Express Polymer Letters, 7, 821–831.10.3144/expresspolymlett.2013.79
   Web of Science ®Google Scholar
• Hoang, C. N., & Dang, Y. H. (2013). Aminolysis of poly(ethylene terephthalate) waste with ethylenediamine and characterization of α,ω-diamine products. Polymer Degradation and Stability, 98, 697–708.10.1016/j.polymdegradsTab.2012.12.026
   Web of Science ®Google Scholar
• Hu, X., & Yu, D. (2012). Hyperbranched polybenzobisthiazole with high thermal stability, good organosolubility, and interesting optical performance. Macromolecular Chemistry and Physics, 213, 738–746.10.1002/macp.v213.7
   Web of Science ®Google Scholar
• Hye Jin, Y., Kyoung Hou, K., Yadav, S. K., & Jae Whan, C. (2012). Effects of carbon nanotube functionalization and annealing on crystallization and mechanical properties of melt-spun carbon nanotubes/poly(ethylene terephthalate) fibers. Composites Science and Technology, 72, 1834–1840.
   Web of Science ®Google Scholar
• Kayaisang, S., Saikrasun, S., & Amornsakchai, T. (2013). Potential use of recycled PET in comparison with liquid crystalline polyester as a dual functional additive for enhancing heat stability and reinforcement for high density polyethylene composite fibers. Journal of Polymers and the Environment, 21, 191–206.10.1007/s10924-012-0446-1
   Web of Science ®Google Scholar
• Kim, M., & Ghim, H. (2013). End-capped polyethylene terephthalate having superior carbonaceous char yield. Fibers and Polymers, 14, 369–374.10.1007/s12221-013-0369-z
   Web of Science ®Google Scholar
• Kostov, G., Atanassov, A., & Kiryakova, D. (2013). Preparation and characterization of fibers of waste and fresh polyethylene terephtalate and mixtures of them. Fibers and Polymers, 14, 216–222.10.1007/s12221-013-0216-2
   Web of Science ®Google Scholar
• Kusuktham, B. (2012). Spinning of poly(ethylene terephthalate) fibers filled with inorganic fillers. Journal of Applied Polymer Science, 126, E387–E395.10.1002/app.36656
   Web of Science ®Google Scholar
• Lee, J. H., Lim, K. S., Hahm, W. G., & Kim, S. H. (2013). Properties of recycled and virgin poly(ethylene terephthalate) blend fibers. Journal of Applied Polymer Science, 128, 1250–1256.10.1002/app.38502
   Web of Science ®Google Scholar
• Liqian, H., Lihua, P., & Inoue, T. (2007). Effect of solid-state shearing of poly(ethylene terephtalate) on isothermal crystallization and fiber structure formation. Journal of Applied Polymer Science, 104, 787–791.
   Web of Science ®Google Scholar
• Mun, M. K., Kim, J.-C., & Chang, J.-H. (2006). Preparation of poly(ethylene terephthalate) nanocomposite fibers incorporating a thermally stable organoclay. Polymer Bulletin, 57, 797–804.10.1007/s00289-006-0627-y
   Web of Science ®Google Scholar
• Parvinzadeh Gashti, M., & Moradian, S. (2012). Effect of nanoclay type on dyeability of polyethylene terephthalate/clay nanocomposites. Journal of Applied Polymer Science, 125, 4109–4120.10.1002/app.v125.5
   Web of Science ®Google Scholar
• Rahmat, A. R., Lim, P. S., Lee Tin, S., Soo-Tueen, B., & Tiam-Ting, T. (2012). The effects of chain extender on viscosity and mechanical properties of poly (buthylene terephthalate) blending with recycled poly (ethylene terephthalate)-glass fiber composite. Journal of Applied Sciences, 12, 296–300.
   Google Scholar
• Ren, M. Q., Zhang, Z. Y., Wu, S. Z., Wei, J., & Xiao, C. F. (2006). Uniaxial orientation and crystallization behavior of amorphous poly(ethylene terephthalate) fibers. Journal of Polymer Research, 13, 9–15.10.1007/s10965-005-9005-y
   Web of Science ®Google Scholar
• Saatchi, E., & Karimi, M. (2013). Incorporating shape memory properties in poly(ethylene terephthalate) film by isothermal crystallization. Fibers and Polymers, 14, 208–215.10.1007/s12221-013-0208-2
   Web of Science ®Google Scholar
• Saeed, H. A. M., & Yimin, W. (2013). Synthesis and characterization of A 2 + B 3 type hyperbranched aromatic-aliphatic polyester with carboxyl end groups. Russian Journal of Applied Chemistry, 86, 1569–1575.10.1134/S1070427213100157
   Web of Science ®Google Scholar
• Saeed, H. M., Eltahir, Y., Xia, Y., & Yimin, W. (2014). Non-isothermal crystallization kinetics and nucleation activity of hyperbranched polyester (HBPET) in recycled PET. Polymer Bulletin, 71, 595–612.10.1007/s00289-013-1080-3
   Web of Science ®Google Scholar
• Sánchez-Soto, M., Maspoch, M. L., & Velasco, J. I. (2013). Analysis and thermo-mechanical characterization of mixed plastic wastes. Polymer-Plastics Technology and Engineering, 52, 16–23.10.1080/03602559.2012.717240
   Web of Science ®Google Scholar
• Shen, L., Worrell, E., & Patel, M. K. (2010). Open-loop recycling: A LCA case study of PET bottle-to-fibre recycling. Resources, Conservation and Recycling, 55, 34–52.10.1016/j.resconrec.2010.06.014
   Web of Science ®Google Scholar
• Upasani, P. S., Jain, A. K., Save, N., Agarwal, U. S., & Kelkar, A. K. (2012). Chemical recycling of PET flakes into yarn. Journal of Applied Polymer Science, 123, 520–525.10.1002/app.34503
   Web of Science ®Google Scholar
• Weizhen, X., Huimin, Y., Keqing, H., & Muhuo, Y. (2005). Study on PET fiber modified by nanomaterials: Improvement of dimensional thermal stability of PET fiber by forming PET/MMT nanocomposites. Journal of Applied Polymer Science, 96, 2247–2252.
   Web of Science ®Google Scholar
• Ye, R., Wang, Q., Fan, X., Yu, Y., Yuan, J., & Wang, P. (2013). A new model substrate for cutinase hydrolyzing polyethylene terephthalate. Fibers and Polymers, 14, 1128–1133.10.1007/s12221-013-1128-x
   Web of Science ®Google Scholar
• Zhao, Y., & Wang, J. (2013). Preparation of novel hyperbranched flame-retardant polymer and its application into natural rubber systems. Journal of Applied Polymer Science, 128, 2385–2394.
   Web of Science ®Google Scholar
• Zhou, J., & Min, B. (2013). Interfacial localization of multiwalled carbon nanotubes in immiscible blend of poly(ethylene terephthalate)/polyamide 6. Fibers and Polymers, 14, 518–524.10.1007/s12221-013-0518-4
   Web of Science ®Google Scholar