Research on physical properties change and damage behavior of cotton fabrics dried in drum-dryer

References

• Adak, B., & Mukhopadhyay, S. (2016). Effect of the dissolution time on the structure and properties of lyocell-fabric-based all-cellulose composite laminates. Journal of Applied Polymer Science, 133(19).
   Web of Science ®Google Scholar
• Aghbashlo, M., Mobli, H., Rafiee, S., & Madadlou, A. (2013). A review on exergy analysis of drying processes and systems. Renewable and Sustainable Energy Reviews, 22, 1–22.10.1016/j.rser.2013.01.015
   Web of Science ®Google Scholar
• Ajayi, J. O. (1992). Effects of fabric structure on frictional properties. Textile Research Journal, 62, 87–93.10.1177/004051759206200205
   Web of Science ®Google Scholar
• Akyol, U., Kahveci, K., & Cihan, A. (2013). Determination of optimum operating conditions and simulation of drying in a textile drying process. The Journal of The Textile Institute, 104, 170–177.10.1080/00405000.2012.707900
   Web of Science ®Google Scholar
• Alomayri, T., Shaikh, F., & Low, I. M. (2013). Thermal and mechanical properties of cotton fabric-reinforced geopolymer composites. Journal of Materials Science, 48, 6746–6752.10.1007/s10853-013-7479-2
   Web of Science ®Google Scholar
• Ameen, A., & Bari, S. (2004). Investigation into the effectiveness of heat pump assisted clothes dryer for humid tropics. Energy Conversion and Management, 45, 1397–1405.10.1016/j.enconman.2003.09.001
   Web of Science ®Google Scholar
• Buisson, Y., Rajasekaran, K., French, A., Conrad, D., & Roy, P. (2000). Qualitative and quantitative evaluation of cotton fabric damage by tumble drying. Textile Research Journal, 70, 739–743.10.1177/004051750007000813
   Web of Science ®Google Scholar
• Cavaco-Paulo, A. (2001). Improving dimensional stability of cotton fabrics with cellulase enzymes. Textile Research Journal, 71, 842–843.10.1177/004051750107100916
   Web of Science ®Google Scholar
• Davidson, G., Ott, E., Spurlin, H. M., & Grafflin, M. W. (1955). Cellulose and cellulose derivatives. Parts I and II. High Polymers, V: JSTOR, 551–552.
   Google Scholar
• Fukatsu, K. (2002). Thermal degradation behaviour of aromatic polyamide fiber blended with cotton fiber. Polymer Degradation and Stability, 75, 479–484.10.1016/S0141-3910(01)00251-8
   Web of Science ®Google Scholar
• Goynes, W. R., & Rollins, M. L. (1971). A scanning electron-microscope study of washer-dryer abrasion in cotton fibers. Textile Research Journal, 41, 226–231.10.1177/004051757104100307
   Web of Science ®Google Scholar
• Hashem, M., Ibrahim, N. A., El-Shafei, A., Refaie, R., & Hauser, P. (2009). An eco-friendly–novel approach for attaining wrinkle–free/soft-hand cotton fabric. Carbohydrate Polymers, 78, 690–703.10.1016/j.carbpol.2009.06.004
   Web of Science ®Google Scholar
• Hearle, J. (1958). A fringed fibril theory of structure in crystalline polymers. Journal of Polymer Science, 28, 432–435.10.1002/pol.1958.1202811722
   Web of Science ®Google Scholar
• Higgins, L., Anand, S., Hall, M., & Holmes, D. (2003a). Effect of tumble-drying on selected properties of knitted and woven cotton fabrics: Part II: Effect of moisture content, temperature setting, and time in dryer on cotton fabrics. The Journal of The Textile Institute, 94, 129–139.10.1080/00405000308630601
   Web of Science ®Google Scholar
• Higgins, L., Anand, S., Hall, M., & Holmes, D. (2003b). Factors during tumble drying that influence dimensional stability and distortion of cotton knitted fabrics. International Journal of Clothing Science and Technology, 15, 126–139.10.1108/09556220310470132
   Google Scholar
• Holst, M., & Payne, P. S. (1994). High-efficiency fabric dryer: Google Patents.
   Google Scholar
• Huang, K. S., Yang, K. L., Lin, S. J., & Lian, W. T. (2007). Antiwrinkle treatment of cotton fabric with a mixed sol of TEOS-TTB/DMDHEU. Journal of Applied Polymer Science, 106, 2559–2564.10.1002/(ISSN)1097-4628
   Web of Science ®Google Scholar
• Ibrahim, H. M., & Hassan, M. S. (2016). Characterization and antimicrobial properties of cotton fabric loaded with green synthesized silver nanoparticles. Carbohydrate Polymers, 151, 841–850.
   PubMed Web of Science ®Google Scholar
• Liu, H., Wang, Y., Gong, R. H., Zeng, J., & Ding, X. (2017). The relationships between washing parameters, fabric movement, and wrinkling in a top-loading washer. Textile Research Journal, 0040517517700197.
   Web of Science ®Google Scholar
• Mackay, C., Anand, S. C., & Bishop, D. P. (1996). Effects of laundering on the sensory and mechanical properties of 1 × 1 rib knitwear fabrics part I: Experimental procedures and fabric dimensional properties. Textile Research Journal, 66, 151–157.10.1177/004051759606600304
   Web of Science ®Google Scholar
• Mackay, C., Anand, S. C., & Bishop, D. P. (1999). Effects of laundering on the sensory and mechanical properties of 1 × 1 rib knitwear fabrics part II: Changes in sensory and mechanical properties. Textile Research Journal, 69, 252–260.10.1177/004051759906900404
   Web of Science ®Google Scholar
• Mikučionienė, D., & Laureckienė, G. (2009). The influence of drying conditions on dimensional stability of cotton weft knitted fabrics. Materials Science, 15, 64–68.
   Web of Science ®Google Scholar
• Moriana, R., Vilaplana, F., Karlsson, S., & Ribes-Greus, A. (2011). Improved thermo-mechanical properties by the addition of natural fibres in starch-based sustainable biocomposites. Composites Part A: Applied Science and Manufacturing, 42, 30–40.10.1016/j.compositesa.2010.10.001
   Web of Science ®Google Scholar
• Ng, A. B., & Deng, S. (2008). A new termination control method for a clothes drying process in a clothes dryer. Applied Energy, 85, 818–829.10.1016/j.apenergy.2007.10.016
   Web of Science ®Google Scholar
• Onal, L., & Candan, C. (2003). Contribution of fabric characteristics and laundering to shrinkage of weft knitted fabrics. Textile Research Journal, 73, 187–191.10.1177/004051750307300301
   Web of Science ®Google Scholar
• Perrier, D., & Benerito, R. (1971). Catalysis of the cellulose-cyclic urea reactions by built-in acid groups. Textile Research Journal, 41, 680–685.10.1177/004051757104100809
   Web of Science ®Google Scholar
• Poon, C.-K., & Kan, C.-W. (2016). Relationship between curing temperature and low stress mechanical properties of titanium dioxide catalyzed flame retardant finished cotton fabric. Fibers and Polymers, 17, 380–388.10.1007/s12221-016-5809-0
   Web of Science ®Google Scholar
• Qi, H., Huang, Y., Ji, B., Sun, G., Qing, F.-L., Hu, C., & Yan, K. (2016). Anti-crease finishing of cotton fabrics based on crosslinking of cellulose with acryloyl malic acid. Carbohydrate Polymers, 135, 86–93.10.1016/j.carbpol.2015.08.014
   PubMed Web of Science ®Google Scholar
• Quaynor, L., Takahashi, M., & Nakajima, M. (2000). Effects of laundering on the surface properties and dimensional stability of plain knitted fabrics. Textile Research Journal, 70, 28–35.10.1177/004051750007000105
   Web of Science ®Google Scholar
• Ramkumar, S., Leaf, G., & Harlock, S. (2000). A study of the frictional properties of 1 × 1 rib-knitted cotton fabrics. The Journal of The Textile Institute, 91, 374–382.10.1080/00405000008659514
   Web of Science ®Google Scholar
• Široká, B., Manian, A. P., Noisternig, M. F., Henniges, U., Kostic, M., Potthast, A., … Bechtold, T. (2012). Wash–dry cycle induced changes in low-ordered parts of regenerated cellulosic fibers. Journal of Applied Polymer Science, 126(S1), E397–E408.
   Web of Science ®Google Scholar
• Suhardjo, K. A. (2009). Improving the quality of cellulose fabric using carbocymethylated process with sodium mono chloro acetate in dimethyl sulfur oxide solution. Indonesian Journal of Materials Science, 10, 239–249.
   Google Scholar
• Tu, J. L., Qian, C. J., Ge, H. Y., Wang, J. P., & Liu, J. Q. (2012). The impact of liquid surface tension on fabric drying efficiency. Advanced Materials Research, 441, 613–618. Trans Tech Publications.
   Google Scholar
• Wei, Y., Hua, J., & Ding, X. (2017). A mathematical model for simulating heat and moisture transfer within porous cotton fabric drying inside the domestic air-vented drum dryer. The Journal of The Textile Institute, 108, 1074–1084.10.1080/00405000.2016.1219450
   Web of Science ®Google Scholar
• Yuan, J., Sun, F., & Ding, X. (2013). Mechanism and influencing factors of woven fabric wrinkling during domestic tumble laundering. China Appliance Technology, S1.
   Google Scholar
• Yun, C., Cho, Y., & Park, C. H. (2017). Washing efficiency and fabric damage by beating and rubbing movements in comparison with a front-loading washer. Textile Research Journal, 87(6), 708–714. 0040517516636005.
   Web of Science ®Google Scholar
• Zhou, X., Zhang, Z., Xu, X., Men, X., & Zhu, X. (2013). Fabrication of super-repellent cotton textiles with rapid reversible wettability switching of diverse liquids. Applied Surface Science, 276, 571–577.10.1016/j.apsusc.2013.03.135
   Web of Science ®Google Scholar
• Zhu, P., Sui, S., Wang, B., Sun, K., & Sun, G. (2004). A study of pyrolysis and pyrolysis products of flame-retardant cotton fabrics by DSC, TGA, and PY–GC–MS. Journal of Analytical and Applied Pyrolysis, 71, 645–655.10.1016/j.jaap.2003.09.005
   Web of Science ®Google Scholar