Flexural stability analysis of composite panels reinforced with stiffener integral woven preforms

References

• Abildskov, D. (1988). U.S. Patent No. 4,782,864. Washington, DC: U.S. Patent and Trademark Office.
   Google Scholar
• Behera, B. K., & Dash, B. P. (2014). An experimental investigation into the mechanical behavior of 3D woven fabrics for structural composites. Fibers and Polymers, 15(9), 1950–1955.10.1007/s12221-014-1950-9
   Web of Science ®Google Scholar
• Dambrine, B. J. G., Godon, T., & Perroux, A. R. Y. (2016). U.S. Patent No. 9,315,927. Washington, DC: U.S. Patent and Trademark Office.
   Google Scholar
• Ekh, J. (2006). Multi-fastener single-lap joints in composite structures ( Doctoral dissertation). Stockholm: KTH.
   Google Scholar
• Elaldi, F., Lee, S., & Scott, R. F. (1995). Manufacture of composite panels with J-shape stiffeners. Materials and Manufacturing Processes, 10(1), 27–36.10.1080/10426919508934996
   Google Scholar
• Fazeli, M., Hübner, M., Lehmann, T., Gebhardt, U., Hoffmann, G., & Cherif, C. (2016). Development of spatially branched woven node structures on the conventional weaving loom. Textile Research Journal, 0040517516683746.
   Google Scholar
• Godon, T., & Dambrine, B. J. G. (2017). U.S. Patent No. 9,539,787. Washington, DC: U.S. Patent and Trademark Office.
   Google Scholar
• Hübner, M., Fazeli, M., Gereke, T., & Cherif, C. (2018). Geometrical design and finite element analysis of woven node structures. Textile Research Journal, 88(2), 213–224.10.1177/0040517516677231
   Web of Science ®Google Scholar
• Junhou, P., & Shenoi, R. A. (1996). Examination of key aspects defining the performance characteristics of out-of-plane joints in FRP marine structures. Composites Part A: Applied Science and Manufacturing, 27(2), 89–103.10.1016/1359-835X(95)00021-S
   Web of Science ®Google Scholar
• Khokar, N. (2008, April). Second-generation woven profiled 3D fabrics from 3D-weaving. In Proceedings of the 1st World Conferences in 3D Fabrics and Their Applications.
   Google Scholar
• Kumar, A., & Arakerimath, R. R. (2015). A Review and modal analysis of stiffened plate. International Research Journal of Engineering and Technology (IRJET), 2, 581–588.
   Google Scholar
• Lee, S., Xiong, Y., Benak, T. J., & Heath, J. (1997). Design, analyses, manufacture and experimental performance of hat-stiffened composite panel. Science and engineering of composite materials, 6(1), 37–50.
   Web of Science ®Google Scholar
• Manjunath, R. N., & Behera, B. K. (2017). Modelling the geometry of the unit cell of woven fabrics with integrated stiffener sections. The Journal of The Textile Institute, 1–7.
   Web of Science ®Google Scholar
• McCarthy, M. (2001). BOJCAS: Bolted joints in composite aircraft structures. Air & Space Europe, 3(3–4), 139–142.10.1016/S1290-0958(01)90077-2
   Google Scholar
• McClain, M., & Goering, J. (2016). U.S. Patent No. 9,290,865. Washington, DC: U.S. Patent and Trademark Office.
   Google Scholar
• Mountasir, A., Hoffmann, G., & Cherif, C. (2013). Development of multilayered woven panels with integrated stiffeners in the transverse and longitudinal directions for thermoplastic lightweight applications. Textile Research Journal, 83(14), 1532–1540.10.1177/0040517512474367
   Web of Science ®Google Scholar
• Mouritz, A. P., & Cox, B. N. (2010). A mechanistic interpretation of the comparative in-plane mechanical properties of 3D woven, stitched and pinned composites. Composites Part A: Applied Science and Manufacturing, 41(6), 709–728.10.1016/j.compositesa.2010.02.001
   Web of Science ®Google Scholar
• Ono, K. (1987). U.S. Patent No. 4,686,134. Washington, DC: U.S. Patent and Trademark Office.
   Google Scholar
• Paik, J. K., & Thayamballi, A. K. (2018). Ultimate limit state design of steel-plated structures. London: John Wiley & Sons.
   Google Scholar
• Palmer, R. J., & Micheaux, D. (1983). U.S. Patent No. 4,379,798. Washington, DC: U.S. Patent and Trademark Office.
   Google Scholar
• Prichard, A. K. (2011). Potential for 3D fabrics in Aircraft Composites. In World Conference on 3D Fabrics and Their Applications.
   Google Scholar
• Stig, F. (2012). 3D-woven reinforcement in composites ( Doctoral dissertation). Stockholm: KTH Royal Institute of Technology.
   Google Scholar
• Torun, A. R. (2011). Advanced manufacturing technology for 3D profiled woven preforms ( Doctoral dissertation). Dresden: Technical University of Dresden.
   Google Scholar
• Torun, A. R., Mountasir, A., Hoffmann, G., & Cherif, C. (2013). Production principles and technological development of novel woven spacer preforms and integrated stiffener structures. Applied Composite Materials, 20(3), 275–285.10.1007/s10443-012-9281-8
   Web of Science ®Google Scholar
• Wang, S. K., Li, M., Gu, Y. Z., Zhang, Z. G., & Wu, B. M. (2010). Mechanical Reinforcement of Three-Dimensional Spacer Fabric Composites. In Materials science forum (Vol. 654, pp. 2604–2607). Switzerland: Trans Tech Publications.
   Google Scholar
• Chen, X., Taylor, L. W., & Tsai, L. J. (2011). An overview on fabrication of three-dimensional woven textile preforms for composites. Textile Research Journal, 81(9), 932–944.10.1177/0040517510392471
   Web of Science ®Google Scholar