References
- Akankwasa, N. T., Jun, W., Yuze, Z., & Mushtaq, M. (2014). Properties of cotton/T-400 and 100% cotton plain knitted fabric made from ring spun yarn. Materialwissenschaft Und Werkstofftechnik, 45(11), 1039–1044. Retrieved from https://doi.org/10.1002/mawe.201400246
- Akankwasa, N. T., Lin, H. T., & Wang, J. (2017). Evaluation of the dual-feed rotor spinning unit based on airflow dynamics and blended yarn properties. The Journal of the Textile Institute, 108(11), 1985–1996. Retrieved from https://doi.org/10.1080/00405000.2017.1305866
- Akankwasa, N. T., Lin, H. T., Zhang, Y. Z., & Wang, J. (2016). Numerical simulation of three-dimensional airflow in a novel dual-feed rotor spinning box. Textile Research Journal, 88(3), 237–253. Retrieved from https://doi.org/10.1177/0040517516677230
- ASTMD1425/D1425M-14. (2014). Standard test method for evenness of textile strands using capacitance testing equipment, 7(01). West Conshohocken, PA: ASTM International. Retrieved from www.astm.org.
- ASTMD2256-97. (1997). Standard test method for tensile properties of yarns by the single-strand method, 7(01), 1. West Conshohocken, PA: ASTM International. Retrieved from www.astm.org.
- Das, A., & Alagirusamy, R. (2010). 3 - Fundamental principles of open end yarn spinning. In C. A. Lawrence (Ed.), Advances in yarn spinning technology, woodhead publishing series in textiles (pp. 79–101). Cambridge: Woodhead Publishing. Retrieved http://www.sciencedirect.com/science/article/pii/B9781845694449500036
- Hajilari, M., Eskandarnejad, S., Behzadan, H., Moghadam, M. B., B., & Moghadam, M. (2007). Effect of two separate fibre feed systems in rotor spinning on yarn properties. Fibers and Polymers, 8(5), 543–549. Retrieved from https://doi.org/10.1007/BF02875878
- Karaca, E., & Ozcelik, F. (2007). Influence of the cross-sectional shape on the structure and properties of polyester fibers. Journal of Applied Polymer Science, 103(4), 2615–2621. Retrieved from http://dx.doi.org/10.1002/app.25350
- Klein, W. & Textile Institute (Manchester England). (1993). New Spinning Systems. Textile Institute. Retrieved from https://books.google.com/books?id=p49oAAAACAAJ).
- Koç, E., & Lawrence, C. A. (2006). Mechanisms of wrapper fibre formation in rotor spinning: an experimental approach. The Journal of the Textile Institute, 97(6), 483–492. Retrieved from https://doi.org/10.1533/joti.2005.0199
- Kong, L. X., & Platfoot, R. A. (2000). Fibre transportation in confined channel with recirculations. Computers & Structures, 78(1-3), 237–245. Retrieved from https://doi.org/10.1016/S0045-7949(00)00092-4
- Kong, L. X., Platfoot, R. A., & Wang, X. (1996). Effects of fiber opening on the uniformity of rotor spun yarns. Textile Research Journal, 66(1), 30–36. Retrieved from http://trj.sagepub.com/content/66/1/30.abstract
- Lawrence, C. A., & Chen, K. Z. (1986). 12 - Factors affecting the spinning of fine rotor-spun yarns. The Journal of the Textile Institute, 77(2), 139–145. Retrieved from http://dx.doi.org/10.1080/00405008608658401
- Lord, P. R. (1971). The structure of open-end spun yarn. Textile Research Journal, 41(9), 778–784. doi:10.1177/004051757504500502
- Manohar, J. S., Rakshit, A. K., & Balasubramanian, N. (1983). Influence of rotor speed, rotor diameter, and carding conditions on yarn quality in open-end spinning. Textile Research Journal, 53(8), 497–503. Retrieved from http://trj.sagepub.com/content/53/8/497.short
- Pinar, N. D., & Osman, B. (2003). Determining an optimum opening roller speed for spinning polyester/waste blend rotor yarns. Textile Research Journal, 73(10), 907–911. Retrieved from https://doi.org/10.1177/004051750307301010
- Nikoli, M., & Bukosek, V. (1995). Influence of opening force during OE spinning on fiber geometry. Textile Research Journal, 65(11), 652–659. Retrieved from http://trj.sagepub.com/cgi/doi/10.1177/004051759506501105
- Petkar, B. M., Oka, P. G., & Sundaram, V. (1980). The cross-sectional shapes of a cotton fiber along its length. Textile Research Journal, 50(9), 541–543. Retrieved from http://dx.doi.org/10.1177/004051758005000904
- Peyravi, A., Eskandarnejad, S., & Moghadam, B. M. (2014). Dual-feed rotor spinning of cotton fiber: trash separation and yarn properties. The Journal of the Textile Institute, 105(4), 377–382. Retrieved from https://doi.org/10.1080/00405000.2013.813663
- Roudbari, B. Y., Eskandarnejad, S., & Mohammad, B. M. (2016). Effect of an increase in opening roller width on quality of rotor spun yarn. The Journal of the Textile Institute, 107(7), 864–872. Retrieved from https://doi.org/10.1080/00405000.2015.1070026
- Seyed, S., Eskandarnejad, S., & Emamzadeh, A. (2015). Effect of geometry of end of the fibre transport channel with slotted exit on rotor spun yarn quality. Journal of the Textile Institute, 106(5), 564–570. Retrieved from https://doi.org/10.1080/00405000.2014.929273
- Sharma, I. C. C., Mukhopadhyay, D., & Agarwal, B. R. R. (1986). Feasibility of single jersey fabric from open-end spun blended yarn. Textile Research Journal, 56(4), 249–253. Retrieved from http://trj.sagepub.com/cgi/doi/10.1177/004051758605600404.
- Steadman, R. G., Gipson, J. R., Mehta, R. D., & Soliman, A. S. (1989). Factors affecting rotor spinning of fine cotton yarns. Textile Research Journal, 59(7), 371–382. Retrieved from https://doi.org/10.1177/004051758905900701
- Wang, J., Yan, J. X., Yushu, L., Zhang, Y., Gong, W., & Fu, T. (2014). Dual feed carding device. Retrieved from http://www.google.com/patents/CN103911696A?cl=en