Compared basic stitch’s consumptions using image analysis, geometrical modelling and statistical techniques

References

• Abher, R., Sheraz, A., Mohsin, M., Ahmad, F., & Afzal, A. (2014). Geometrical model to calculate the consumption of sewing thread for 301 lockstitch. Journal of the Textile Institute, 105(12), 159–1264.
   Web of Science ®Google Scholar
• Alagha, M. J., Amirbayat, J., & Porat, I. (1996). A study of positive needle thread feed during Chainstitch Sewing. Journal of the Textile Institute, 87(2), 389–395. doi:10.1080/00405009608659090
   Web of Science ®Google Scholar
• Amirbayat, J., & Alagha, M. J. (1993). Further studies on balance and thread consumption of lockstitch seams. International Journal of Clothing Science and Technology, 5(2), 26–31. doi:10.1108/eb003014
   Google Scholar
• Behera, B. K., Chand, S., Singh, T. G., & Rathee, P. (1997). Sewability of denim. International Journal of Clothing Science and Technology, 9(2), 128–140. doi:10.1108/09556229710168261
   Google Scholar
• Buzov, J. A., Modestova, T. A., & Alymenkova, N. D. (1978). Fabric development in the garment industry, Moscow: Lyogkaya Industria.
   Google Scholar
• Chen, A., Zou, H. J., & Du, R. (2001). Modeling of industrial sewing machines and the balancing of thread requirement and thread supply. Journal of the Textile Institute, 92(3), 256–268. doi:10.1080/00405000108659575
   Web of Science ®Google Scholar
• Dobilaite, V., & Juciene, M. (2006). The influence of mechanical properties of sewing threads on seam pucker. International Journal of Clothing Science and Technology, 18(5), 335–345. doi:10.1108/09556220610685276
   Web of Science ®Google Scholar
• Dorrity, J. L., & Olson, L. H. (1996). Thread motion ratio used to monitor sewing machines. International Journal of Clothing Science Technology, 8, 1–6.
   Google Scholar
• Fan, J., & Leeuwner, W. (1998). The performance of sewing threads with respect to seam appearance. Journal of the Textile Institute, 89(1), 142–153. doi:10.1080/00405009808658605
   Web of Science ®Google Scholar
• Ferreira, F. B. N., Grosberg, P., & Harlock, S. C. (1994a). A study of thread tensions on a lockstitch sewing machine: I. International Journal of Clothing Science and Technology, 6(1), 14–19. doi:10.1108/09556229410054468
   Google Scholar
• Ferreira, F. B. N., Grosberg, P., & Harlock, S. C. (1994b). A study of thread tensions on a lockstitch sewing machine: II. International Journal of Clothing Science and Technology, 6(5), 26–29. doi:10.1108/09556229410074583
   Google Scholar
• Ferreira, F. B. N., Grosberg, P., & Harlock, S. C. (1994c). A study of thread tensions on a lockstitch sewing machine: III. International Journal of Clothing Science and Technology, 6(5), 39–42. doi:10.1108/09556229410074592
   Google Scholar
• Galuszynski, S. (1985). Some aspects of the mechanism of seam slippage in woven fabrics. Journal of the Textile Institute, 76(6), 425–433. doi:10.1080/00405008508658957
   Web of Science ®Google Scholar
• Ghosh, S., & Chavhan, V. (2014). A geometrical model of stitch length for lockstitch seam. Indian Journal of Fiber & Textile Research, 39, 153–156.
   Web of Science ®Google Scholar
• Hayes, S. G. (2001). The effects of check-spring travel on lockstitch sewing. Research Journal of Textile and Apparel, 5(2), 54–64. doi:10.1108/RJTA-05-02-2001-B006
   Google Scholar
• Horino, T., Miura, Y., Ando, Y., & Sakamoto, K. (1982). Simultaneous measurement of needle thread tension and check spring motion of lockstitch sewing machine for industrial use. Journal of the Textile Machinery Society of Japan, 35, T30–T37.
   Google Scholar
• Inui, S., & Shibuya, A. (1992). Objective evaluation of seam pucker. International Journal of Clothing Science Technology, 4, 53–64.
   Google Scholar
• Inui, S., & Yamanaka, T. (1998). Seam pucker simulation. International Journal of Clothing Science and Technology, 10(2), 128–142. doi:10.1108/09556229810213836
   Google Scholar
• Inui, S., Okabe, H., & Yamaraka, T. (2001). Simulation of seam pucker on two strips of fabric sewn together. International Journal of Clothing Science and Technology, 13(1), 53–64. doi:10.1108/09556220110384905
   Google Scholar
• Jaouachi, B., Khedher, F., & Mili, F. (2012). Consumption of the sewing thread of jean pant using Taguchi design analysis. AUTEX Research Journal, 12, 744–751.
   Web of Science ®Google Scholar
• Jaouachi, B., & Khedher, F. (2013). Evaluating sewing thread consumption of jean pants using fuzzy and regression methods. Journal of the Textile Institute, 104(10), 1065–1070. doi:10.1080/00405000.2013.773627
   Web of Science ®Google Scholar
• Jaouachi, B., & Khedher, F. (2015). Evaluation of sewed thread consumption of jean trousers using neural network and regression methods. Fibres and Textiles in Eastern Europe, 23(111), 91–96. doi:10.5604/12303666.1152518
   Google Scholar
• Jaouachi, B., Aouine, S., & Khedher, F. (2017). Consumed sewing thread behaviour based on lockstitch and chainstitch. Indian Journal of Fibre & Textile Research, 42(3), 325–334.
   Web of Science ®Google Scholar
• Jaouadi, M., Msahli, S., Babay, A., & Zitouni, B. (2006). Analysis of the modeling methodologies for predicting the sewing thread consumption. International Journal of Clothing Science and Technology, 18(1), 7–18. doi:10.1108/09556220610637477
   Google Scholar
• Jonaitiene, V., & Stanys, S. (2005). The analysis of the seam strength characteristics of the PES-PTFE air-jet-textured sewing threads. International Journal of Clothing Science and Technology, 17(3–4), 264–271.
   Google Scholar
• Kamata, Y., Kinoshita, R., Ishikawa, S., & Fujisaki, K. (1982). Effect of needle thread slipped out of rotating hook on tightening tension of an industrial single-needle lockstitch sewing machine part I. Journal of the Textile Machinery Society of Japan, 35, T60–T71.
   Google Scholar
• Kamata, Y., Kinoshita, R., Ishikawa, S., & Fujisaki, K. (1984). Disengagement of needle thread from rotating hook, effects of its timing on tightening tension, industrial single-needle lockstitch sewing machine. Journal of the Textile Machinery Society of Japan, 30(2), 40–49. doi:10.4188/jte1955.30.40
   Google Scholar
• Kennon, W. R., & Hayes, S. G. (2000). The effects of feed retardation on lockstitch sewing. Journal of the Textile Institute, 91(4), 509–522. doi:10.1080/00405000008659124
   Web of Science ®Google Scholar
• Khan, R. A., Hersh, S. P., & Grady, P. L. (1970). Simulation of needle-fabric interactions in sewing operations. Textile Research Journal, 40(6), 489–498. doi:10.1177/004051757004000601
   Web of Science ®Google Scholar
• Khedher, F., & Jaouachi, B. (2015). Waste factor evaluation using theoretical and experimental jean pants consumptions. Journal of the Textile Institute, 106(4), 402–408. doi:10.1080/00405000.2014.924225
   Web of Science ®Google Scholar
• Krishnan, S. A. N., & Kumar, A. L. (2010). Design of sewing thread tension measuring device. Indian Journal of Fibre & Textile Research, 35, 65–67.
   Web of Science ®Google Scholar
• Lauriol, A. (1989). Initiation à la technologie des matériels dans l’industrie de l’habillement, 2nd ed. Paris: Vauclaire.
   Google Scholar
• Meric, B., & Durmaz, A. (2005). Effect of thread structure and lubrication ratio on seam properties. Indian Journal of Fibre & Textile Research, 30, 273–277.
   Web of Science ®Google Scholar
• Midha, V. K., Kothari, V. K., Chatopadhyay, R., & Mukhopadhyay, A. (2009). Effect of high‐speed sewing on the tensile properties of sewing threads at different stages of sewing. International Journal of Clothing Science Technology, 21(4), 232.
   Web of Science ®Google Scholar
• Miyuki, M., & Masako, N. (1994). Investigation of the performance of sewing thread. International Journal of Clothing Science Technology, 6(2/3), 20–27.
   Google Scholar
• Mukhopadhyay, A. (2008). Relative performance of lockstitch and chainstitch at the seat seam of military trouser. Journal of Engineered Fibers and Fabric, 3(1), 21–24.
   Web of Science ®Google Scholar
• O’Dwyer, U., & Munden, D. L. (1975). A study of the factors effecting the dimensions and thread consumption in 301 seams: Part I. Clothing Research Journal, 3, 3–32.
   Google Scholar
• Park, C. K., & Kang, T. J. (1999a). Objective evaluation of seam pucker using artificial intelligence part one: Geometric modelling of seam pucker. Textile Research Journal, 69, 735–742.
   Web of Science ®Google Scholar
• Park, C. K., & Kang, T. J. (1999b). Objective evaluation of seam pucker using artificial intelligence part two: Method of evaluating seam pucker. Textile Research Journal, 69, 835–845.
   Web of Science ®Google Scholar
• Park, C. K., & Kang, T. J. (1999c). Objective evaluation of seam pucker using artificial intelligence part three: Using the objective method to analyze the effects of sewing parameters on seam pucker. Textile Research Journal, 69, 919–924.
   Web of Science ®Google Scholar
• Prabir, J. (2011). Assembling technologies for functional garments: An overview. Indian Journal of Fibre & Textile Research, 36, 380–387.
   Web of Science ®Google Scholar
• Rengasamy, R. S., Kothari, V. K., Alagirusamy, R., & Modi, S. (2003). Studies on air-jet textured sewing threads. Indian Journal of Fibre & Textile Research, 28, 281–287.
   Web of Science ®Google Scholar
• Seyam, A., & El-Shiekh, A. (1994). Mechanics of woven fabric, part IV: Critical review of fabric degree of tightness and its applications. Textile Research Journal, 64(11), 653–662. doi:10.1177/004051759406401105
   Web of Science ®Google Scholar
• Sundaresan, G., Salhotra, K. R., & Hari, P. K. (1998). Strength reduction in sewing threads during high-speed sewing in industrial lockstitch machine: Part II: Effect of thread. International Journal of Clothing Science and Technology, 10(1), 64–79. doi:10.1108/09556229810205303
   Google Scholar
• Ukponmwan, J. O., Mukhopadhyay, A., & Chatterjee, K. N. (2000). Sewing threads. Textile Progress Institute Journal, 30, 79–80.
   Google Scholar
• Webster, J., Laing, R. M., & Niven, B. E. (1998a). Effects of repeated extension and recovery on selected physical properties of ISO-301 stitched seams. Part I: Load at maximum extension and at break. Textile Research Journal, 68(11), 854–864. doi:10.1177/004051759806801111
   Web of Science ®Google Scholar
• Webster, J., Laing, R. M., & Enlow, R. L. (1998b). Effects of repeated extension and recovery on selected physical properties of ISO-301 stitched seams, part II: Theoretical model. Textile Research Journal, 68(12), 881–888. doi:10.1177/004051759806801202
   Web of Science ®Google Scholar
• Webster, J. (1996). Effects of ageing on selected mechanical properties of ISO-301 stitched seams, Doctoral thesis, University of Otago, Dunedin, New Zealand.
   Google Scholar