A study of the heat insulation performance of pre-oxidized fiber felts of silica aerogel/silicon carbide composite coatings

References

• Alam, M., Singh, H., Suresh, S., & Redpath, D. A. G. (2017). Energy and economic analysis of vacuum insulation panels (VIPs) used in non-domestic buildings. Applied Energy, 188, 1–8. doi: 10.1016/j.apenergy.2016.11.115
   Web of Science ®Google Scholar
• Ao, W., Liu, P. J., & Yang, W. J. (2016). Agglomerates, smoke oxide particles, and carbon inclusions in condensed combustion products of an aluminized GAP-based propellant. Acta Astronautica, 129, 147–153. doi: 10.1016/j.actaastro.2016.09.011
   Web of Science ®Google Scholar
• Chen, L. C., Peng, P. Y., Lin, L. F., Yang, T. C. K., & Huang, C. M. (2014). Facile preparation of nitrogen-doped activated carbon for carbon dioxide adsorption. Aerosol and Air Quality Research, 14(3), 916–927. doi: 10.4209/aaqr.2013.03.0089
   Web of Science ®Google Scholar
• Cheng, H. M., Hong, C. Q., Zhang, X. H., Xue, H. F., Meng, S. H., & Han, J. C. (2016). Super flame-retardant lightweight rime-like carbon-phenolic nanofoam. Scientific Reports, 6, 33480.
   PubMed Web of Science ®Google Scholar
• Cheng, H. M., Xue, H. F., Hong, C. Q., & Zhang, X. H. (2017). Preparation, mechanical, thermal and ablative properties of lightweight needled carbon fibre felt/phenolic resin aerogel composite with a bird’s nest structure. Composites Science and Technology, 140, 63–72. doi: 10.1016/j.compscitech.2016.12.031
   Web of Science ®Google Scholar
• Christke, S., Gibson, A. G., Grigoriou, K., & Mouritz, A. P. (2016). Multi-layer polymer metal laminates for the fire protection of lightweight structures. Materials & Design, 97, 349–356. doi: 10.1016/j.matdes.2016.02.105
   Web of Science ®Google Scholar
• Frid, S. E., Arsatov, A. V., & Oshchepkov, M. Y. (2016). Engineering solutions for polymer composites solar water heaters production. Thermal Engineering, 63(6), 399–403. doi: 10.1134/S0040601516060021
   Google Scholar
• Gao, C., Huang, L., Yan, L. B., Kasal, B., & Li, W. G. (2016). Behavior of glass and carbon FRP tube encased recycled aggregate concrete with recycled clay brick aggregate. Composite Structures, 155, 245–254.
   Web of Science ®Google Scholar
• Gao, L. L., Lu, H. Y., Lin, H. B., Sun, X. Y., Xu, J. L., Liu, D. C., & Li, Y. (2014). KOH direct activation for preparing activated carbon fiber from polyacrylonitrile-based pre-oxidized fiber. Chemical Research in Chinese Universities, 30(3), 441–446. doi: 10.1007/s40242-014-4059-1
   Web of Science ®Google Scholar
• Ghelich, R., Aghdam, R. M., Torknik, F. S., Jahannama, M. R., & Keyanpour-Rad, M. (2015). Carbothermal reduction synthesis of ZrB2 nanofibers via pre-oxidized electrospun zirconium n-propoxide. Ceramics International, 41(5), 6905–6911. doi: 10.1016/j.ceramint.2015.01.143
   Web of Science ®Google Scholar
• Li, C. D., Li, B. B., Pan, N., Chen, Z. F., Saeed, M. U., Xu, T. Z., & Yang, Y. (2016). Thermo-physical properties of polyester fiber reinforced fumed silica/hollow glass microsphere composite core and resulted vacuum insulation panel. Energy and Buildings, 125, 298–309. doi: 10.1016/j.enbuild.2016.05.013
   Web of Science ®Google Scholar
• Lin, J. H., Chuang, Y. C., Huang, C. H., Li, T. T., Huang, C. L., Chen, Y. S., & Lou, C. W. (2016). Needle-bonded electromagnetic shielding thermally insulating nonwoven composite boards: Property evaluations. Applied Sciences-Basel, 6(10), 303. doi: 10.3390/app6100303
   Web of Science ®Google Scholar
• Liu, S. P., Han, K. Q., Chen, L., Zheng, Y., & Yu, M. H. (2015). Influence of air circulation on the structure and properties of melt-spun PAN precursor fibers during thermal oxidation. RSC Advances, 5(47), 37669–37674. doi: 10.1039/C5RA00476D
   Web of Science ®Google Scholar
• Liu, S. P., Han, K. Q., Chen, L., Zheng, Y., Yu, M. H., Li, J. Q., & Yang, Z. (2015). Influence of external tension on the structure and properties of melt-spun PAN precursor fibers during thermal oxidation. Macromolecular Materials and Engineering, 300(10), 1001–1009. doi: 10.1002/mame.201500104
   Web of Science ®Google Scholar
• Martinelli, E., Perri, F., Sguazzo, C., & Faella, C. (2016). Cyclic shear-compression tests on masonry walls strengthened with alternative configurations of CFRP strips. Bulletin of Earthquake Engineering, 14(6), 1695–1720. doi: 10.1007/s10518-016-9895-6
   Web of Science ®Google Scholar
• Pehlivanli, Z. O., Uzun, I., Yucel, Z. P., & Demir, I. (2016). The effect of different fiber reinforcement on the thermal and mechanical properties of autoclaved aerated concrete. Construction and Building Materials, 112, 325–330. doi: 10.1016/j.conbuildmat.2016.02.223
   Web of Science ®Google Scholar
• Puszkarz, A. K., & Krucinska, I. (2016). Study of multilayer clothing thermal insulation using thermography and the finite volume method. Fibres and Textiles in Eastern Europe, 24, 129–137. doi: 10.5604/12303666.1221747
   Web of Science ®Google Scholar
• Ren, X. M., Wang, Y. S., He, T., & Xia, Z. C. (2014). Analysis and characterization of orientation structure of pre-oxidized PAN fibers in high magnetic fields. Journal of Wuhan University of Technology-Material Science, 29(2), 224–228. doi: 10.1007/s11595-014-0897-4
   Google Scholar
• Shakir, A. S., Guan, Z. W., & Jones, S. W. (2016). Lateral impact response of the concrete filled steel tube columns with and without CFRP strengthening. Engineering Structures, 116, 148–162.
   Web of Science ®Google Scholar
• Silva, H. P., Pardini, L. C., & Bittencourt, E. (2016). Shear properties of carbon fiber/phenolic resin composites heat treated at high temperatures. Journal of Aerospace Technology and Management, 8(3), 363–372. doi: 10.5028/jatm.v8i3.643
   Web of Science ®Google Scholar
• Stamopoulos, A. G., Tserpes, K. I., Prucha, P., & Vavrik, D. (2016). Evaluation of porosity effects on the mechanical properties of carbon fiber-reinforced plastic unidirectional laminates by X-ray computed tomography and mechanical testing. Journal of Composite Materials, 50(15), 2087–2098. doi: 10.1177/0021998315602049
   Web of Science ®Google Scholar
• Takahashi, F., Abbott, A., Murray, T. M., T'ien, J. S., & Olson, S. L. (2014). Thermal response characteristics of fire blanket materials. Fire and Materials, 38(6), 609–638. doi: 10.1002/fam.2202
   Web of Science ®Google Scholar
• Trautwein, G., Plaza-Recobert, M., & Alcaniz-Monge, J. (2016). Unusual pre-oxidized polyacrylonitrile fibres behaviour against their activation with CO2: Carbonization effect. Adsorption Journal of the International Adsorption Society, 22(2), 223–231. doi: 10.1007/s10450-016-9757-1
   Web of Science ®Google Scholar
• Vo, L. T. T., & Navard, P. (2016). Treatments of plant biomass for cementitious building materials – A review. Construction and Building Materials, 121, 161–176. doi: 10.1016/j.conbuildmat.2016.05.125
   Web of Science ®Google Scholar
• Williams, J., Lawrence, M., & Walker, P. (2016). A method for the assessment of the internal structure of bio-aggregate concretes. Construction and Building Materials, 116, 45–51. doi: 10.1016/j.conbuildmat.2016.04.088
   Web of Science ®Google Scholar
• Zargham, S., Bazgir, S., Katbab, A. A., & Rashidi, A. (2015). High-quality carbon nanofiber-based chemically preoxidized electrospun nanofiber. Fullerenes, Nanotubes and Carbon Nanostructures, 23(12), 1008–1017. doi: 10.1080/1536383X.2015.1007204
   Web of Science ®Google Scholar
• Zhai, Y. J., Peng, Z. J., Ren, X. B., Wang, C. H., Qi, L. H., & Miao, H. Z. (2015). Effect of in situ transformed pre-oxidized polyacrylonitrile fibers on the microstructure and mechanical properties of TiCN-based cermets. Rare Metal Materials and Engineering, 44, 731–734.
   Web of Science ®Google Scholar
• Zhu, D. J., Ma, T., & Liu, W. H. (2016). Experimental study on electrical heating technology utilizing carbon fiber tape. Journal of Hunan University (Natural Sciences), 43, 131–136.
   Google Scholar