Introduction of poly(acrylic acid) branch onto acetate starch for polyester warp sizing

References

• Athawale, V. D., & Lele, V. (1998). Graft copolymerization onto starch. II. Grafting of acrylic acid and preparation of it’s hydrogels. Carbohydrate Polymers, 35(1–2), 21–27. https://doi.org/10.1016/S0144-8617(97)00138-0
   Web of Science ®Google Scholar
• Behera, B. K., Gupta, R., & Mishra, R. (2008). Comparative analysis of mechanical properties of size film. I. Performance of individual size materials. Fibers and Polymers, 9(4), 481–488. https://doi.org/10.1007/s12221-008-0077-2
   Web of Science ®Google Scholar
• Dai, L., Qiu, C., Xiong, L., & Sun, Q. (2015). Characterisation of corn starch-based films reinforced with taro starch nanoparticles. Food Chemistry, 174, 82–88. https://doi.org/10.1016/j.foodchem.2014.11.005
   PubMed Web of Science ®Google Scholar
• Feng, K. J., & Xue, J. D. (2006). The pretreatment in dyeing (Vol. 124). China Textile & Apparel Press.
   Google Scholar
• Ghafoori, M., Mohammadi, N., & Ghaffarian, S. R. (2007). The role of joint viscoelastic function in the adhesion of low-density polyethylene to thermoplastic starch. Journal of Adhesion Science and Technology, 21(11), 1059–1069. https://doi.org/10.1163/156856107782105945
   Web of Science ®Google Scholar
• Hu, G., Chen, J., & Gao, J. (2009). Preparation and characteristics of oxidized potato starch films. Carbohydrate Polymers, 76(2), 291–298. https://doi.org/10.1016/j.carbpol.2008.10.032
   Web of Science ®Google Scholar
• Hu, P. (2007). Foundation in dyeing and finishing of fabrics (Vol. 38). China Textile & Apparel Press.
   Google Scholar
• Jakob, B. (1998). WEBEREI-Enffernen von starkehaltigen Schlichten: Der enzymatische Aufschluss-mehr als nur eine Entschlichtung. Melliand Textilberichte, 79, 523.
   Google Scholar
• Jansson, A., & Thuvander, F. (2004). Influence of thickness on the mechanical properties for starch films. Carbohydrate Polymers, 56(4), 499–503. https://doi.org/10.1016/j.carbpol.2004.03.019
   Web of Science ®Google Scholar
• Krycer, I., Pope, D. G., & Hersey, J. A. (1983). An evaluation of tablet binding agents part I. Solution binders. Powder Technology, 34(1), 39–51. https://doi.org/10.1016/0032-5910(83)87026-0
   Web of Science ®Google Scholar
• Li, W., Xu, W. Z., Wei, A. F., Xu, Z. Z., & Zhang, C. H. (2016). Quaternization/maleation of cornstarch to improve its adhesion and film properties for warp sizing. Fibers and Polymers, 17(10), 1589–1597. https://doi.org/10.1007/s12221-016-6360-8
   Web of Science ®Google Scholar
• Li, W., & Zhu, Z. F. (2016). Electroneutral maize starch by quaterization and sulfosuccination for strong adhesion-to-viscose fibers and easy removal. Journal of Adhesion, 92(4), 257–272. https://doi.org/10.1080/00218464.2015.1025953
   Web of Science ®Google Scholar
• Liu, Z., Li, Y., Cui, F., Ping, L., Song, J., Ravee, Y., Jin, L., Xue, Y., Xu, J., Li, G., Wang, Y., & Zheng, Y. (2008). Production of octenyl succinic anhydride-modified waxy corn starch and its characterization. Journal of Agricultural and Food Chemistry, 56(23), 11499–11506. https://doi.org/10.1021/jf802317q
   PubMed Web of Science ®Google Scholar
• Mostafa, K. M. (1995). Graft polymerization of acrylic acid onto starch using potassium permanganate acid (redox system). Journal of Applied Polymer Science, 56(2), 263–269. https://doi.org/10.1002/app.1995.070560217
   Web of Science ®Google Scholar
• Nikolic, V., Velickovic, S., & Popovic, A. (2012). Amine activators influence on grafting reaction between methacrylic acid and starch. Carbohydrate Polymers, 88(4), 1407–1413. https://doi.org/10.1016/j.carbpol.2012.02.027
   Web of Science ®Google Scholar
• Reddy, N., & Yang, Y. (2010). Citric acid cross-linking of starch films. Food Chemistry., 118(3), 702–711. https://doi.org/10.1016/j.foodchem.2009.05.050
   Web of Science ®Google Scholar
• Sandhu, K. S., Singh, N., & Lim, S. T. (2007). A comparison of native and acid thinned normal and waxy corn starches: Physicochemical, thermal, morphological and pasting properties. LWT - Food Science and Technology, 40(9), 1527–1536. https://doi.org/10.1016/j.lwt.2006.12.012
   Web of Science ®Google Scholar
• Seydel, P. V., & Hunt, J. R. (1981). Textile warp sizing (Chapters 1, 9). Phoenix Printing.
   Google Scholar
• Shen, S., Zhu, Z., & Liu, F. (2016). Introduction of poly[(2-acryloyloxyethyl trimethyl ammonium chloride)-co-(acrylic acid)] branches onto starch for cotton warp sizing. Carbohydrate Polymers, 138, 280–289. https://doi.org/10.1016/j.carbpol.2015.11.058
   PubMed Web of Science ®Google Scholar
• Sodhi, N. S., & Singh, N. J. (2005). Characteristics of acetylated starches prepared using starches separated from different rice cultivars. Journal of Food Engineering, 70(1), 117–127. https://doi.org/10.1016/j.jfoodeng.2004.09.018
   Web of Science ®Google Scholar
• Thiré, R. M. S. M., Simão, R. A., & Andrade, C. T. (2003). High resolution imaging of the microstructure of maize starch films. Carbohydrate Polymers, 54(2), 149–158. https://doi.org/10.1016/S0144-8617(03)00167-X
   Web of Science ®Google Scholar
• Wang, X., Gao, W., Zhang, L., Xiao, P., Yao, L., Liu, Y., Li, K., & Xie, W. (2008). Study on the morphology, crystalline structure and thermal properties of yam starch acetates with different degrees of substitution. Chem, 51, 589.
   Google Scholar
• Wu, S. (1982). Polymer interface and adhesion (Chapter 10, Vol. 11). New York: M Dekker.
   Google Scholar
• Yang, M., Shen, Y., Wu, H., Cui, G., & Yan, Y. (2017). Effect of substitution degree on structure and properties of starch acetate (Vol. 25, p. 4). Advanced Textile Technology.
   Google Scholar
• Yang, S., & Huang, C. (2008). Plasma treatment for enhancing mechanical and thermal properties of biodegradable PVA/starch blends. Journal of Applied Polymer Science, 109(4), 2452–2459. https://doi.org/10.1002/app.28338
   Web of Science ®Google Scholar
• Zhang, H., Wang, J., Wang, R., & Dong, Y. (2013). Microwave irradiated synthesis of grafted cationic starch: Synthesis, characterization, application, and biodegradation. Journal of Applied Polymer Science, 130(3), 1645–1652. https://doi.org/10.1002/app.39310
   Web of Science ®Google Scholar
• Zhang, K. (1996). Interface science of polymers (Chapter 5). China Petrochemical Press.
   Google Scholar
• Zhou, D., Shen, Y., Wu, H., & Feng, Y. (2013). Preparation and property research of acetate starch size mixture (Vol. 41, p. 836). Cotton Textile Technology.
   Google Scholar
• Zhou, Y. Y. (2004). Theory of textile warp sizes (Chapter 4, 5). China Textile & Apparel Press.
   Google Scholar
• Zhu, Z. F. (2010). Chemistry in textile engineering (pp. 179–217). Donghua University Press Co. Ltd.
   Google Scholar
• Zhu, Z. F., & Cao, S. (2004). Modifications to improve the adhesion of crosslinked starch sizes to fiber substrates. Textile Research Journal, 74(3), 253–258. https://doi.org/10.1177/004051750407400312
   Web of Science ®Google Scholar
• Zhu, Z. F., & Chen, P. (2007). Carbamoyl ethylation of starch for enhancing the adhesion capacity to fibers. Journal of Applied Polymer Science, 106(4), 2763–2768. https://doi.org/10.1002/app.26813
   Web of Science ®Google Scholar
• Zhu, Z. F., & Lei, Y. (2015). Effect of chain length of the alkyl in quaternary ammonium substituents on the adhesion-to-fiber, aerobic biodegradation, and desizability of quaternized cornstarch. Journal of Adhesion Science and Technology, 29(2), 116–132. https://doi.org/10.1080/01694243.2014.976515
   Web of Science ®Google Scholar
• Zhu, Z. F., Li, M., & Jin, E. (2009). Effect of an allyl pretreatment of starch on the grafting efficiency and properties of allyl starch-g-poly(acrylic acid). Journal of Applied Polymer Science, 112(5), 2822–2829. https://doi.org/10.1002/app.29621
   Web of Science ®Google Scholar
• Zhu, Z. F., & Shen, S. (2014). Effect of amphoteric grafting branch on the adhesion of starch to textile fibers. Journal of Adhesion Science and Technology., 28(17), 1695–1710. https://doi.org/10.1080/01694243.2014.913514
   Web of Science ®Google Scholar
• Zhu, Z. F., Zhang, L., & Feng, X. (2016). Introduction of 3-(trimethylammonium chloride)-2-hydroxypropyls onto starch chains for improving the grafting efficiency and sizing property of starch-g-poly(acrylic acid). Starch – Stärke, 68(7–8), 742–752. https://doi.org/10.1002/star.201500256
   Web of Science ®Google Scholar
• Zhu, Z. F., Zheng, H., & Li, X. (2013). Effects of succinic acid cross-linking and mono-phosphorylation of oxidized cassava starch on its paste viscosity stability and sizability. Starch – Stärke, 65(9–10), 854–863. https://doi.org/10.1002/star.201200256
   Web of Science ®Google Scholar
• Zhu, Z. F., & Zhu, Z. Q. (2014). Adhesion of starch-g-poly(2-acryloyloxyethyl trimethyl ammonium chloride) to cotton and polyester fibers. Starch – Stärke, 66(5–6), 566–575. https://doi.org/10.1002/star.201300206
   Web of Science ®Google Scholar