References
- Araya-Calvo, M., López-Gómez, I., Chamberlain-Simon, N., León-Salazar, J. L., Guillén-Girón, T., Corrales-Cordero, J. S., & Sánchez-Brenes, O. (2018). Evaluation of compressive and flexural properties of continuous fiber fabrication additive manufacturing technology. Additive Manufacturing, 22, 157–164. https://doi.org/https://doi.org/10.1016/j.addma.2018.05.007
- Banjanin, B. (2018). Production factors influencing mechanical and physical properties of FDM printed embossing dies. In 9th international symposium on graphic engineering and design. https://doi.org/https://doi.org/10.24867/GRID-2018-p28
- Biswas, M. C., Jeelani, S., & Rangari, V. (2017). Influence of biobased silica/carbon hybrid nanoparticles on thermal and mechanical properties of biodegradable polymer films. Composites Communications, 4, 43–53. https://doi.org/https://doi.org/10.1016/j.coco.2017.04.005
- Biswas, M. C., Tiimob, B. J., Abdela, W., Jeelani, S., & Rangari, V. K. (2019). Nano silica-carbon-silver ternary hybrid induced antimicrobial composite films for food packaging application. Food Packaging and Shelf Life, 19, 104–113. https://doi.org/https://doi.org/10.1016/j.fpsl.2018.12.003
- Dickson, A. N., Barry, J. N., McDonnell, K. A., & Dowling, D. P. (2017). Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing. Additive Manufacturing, 16, 146–152. https://doi.org/https://doi.org/10.1016/j.addma.2017.06.004
- Dikshit, V., Nagalingam, A. P., Goh, G. D., Agarwala, S., Yeong, W. Y., & Wei, J. (2019). Quasi-static indentation analysis on three-dimensional printed continuous-fiber sandwich composites. Journal of Sandwich Structures & Materials, 21, 109963621983605. https://doi.org/https://doi.org/10.1177/1099636219836058
- Goh, G. D. (2018). Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics. Materials & Design, 137, 79–89.
- Hu, Q., Duan, Y., Zhang, H., Liu, D., Yan, B., & Peng, F. (2018). Manufacturing and 3D printing of continuous carbon fiber prepreg filament. Journal of Materials Science, 53(3), 1887–1898. https://doi.org/https://doi.org/10.1007/s10853-017-1624-2
- Ishii, K., Todoroki, A., Mizutani, Y., Suzuki, Y., Koga, Y., Matsuzaki, R., Ueda, M., & Hirano, Y. (2019). Bending fracture rule for 3D-printed curved continuous-fiber composite. Advanced Composite Materials, 28(4), 383–395. https://doi.org/https://doi.org/10.1080/09243046.2018.1558327
- Kabir, S. F., Mathur, K., & Seyam, A.-F. M. (2020). A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties. Composite Structures, 232, 111476. https://doi.org/https://doi.org/10.1016/j.compstruct.2019.111476
- Kabir, S. M. F., Mathur, K., & Seyam, A.-F. M. (2020). Impact resistance and failure mechanism of 3D printed continuous fiber-feinforced cellular composites. Journal of the Textile Institute, 111, 1–15.
- Kurtz, S. M. (2019). PEEK biomaterials handbook. Waltham, MA, USA: Elsevier.
- Lumpe, T. S., Mueller, J., & Shea, K. (2019). Tensile properties of multi-material interfaces in 3D printed parts. Materials & Design, 162, 1–9.
- Markforged. The Mark Two desktop 3D printer. 2019 [cited 2019 March 16]. https://3d.markforged.com/say-hello.html?mfa=ga-search&adg=40301838887&kw=markforged&device=c&gclid=EAIaIQobChMInLeUioSI4QIVzrftCh0GaglPEAAYASAAEgKxnfD_BwE.
- Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016). Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation. Scientific Reports, 6, 23058. https://doi.org/https://doi.org/10.1038/srep23058
- Mei, H., Ali, Z., Ali, I., & Cheng, L. (2019). Tailoring strength and modulus by 3D printing different continuous fibers and filled structures into composites. Advanced Composites and Hybrid Materials, 2(2), 312–319. https://doi.org/https://doi.org/10.1007/s42114-019-00087-7
- Midani, M., Seyam, A.-F., Saleh, M. N., & Pankow, M. (2019). The effect of the through-thickness yarn component on the in-and out-of-plane properties of composites from 3D orthogonal woven preforms. The Journal of the Textile Institute, 110(3), 317–327. https://doi.org/https://doi.org/10.1080/00405000.2018.1481722
- Midani, M. S. (2016). The influence of weave and structural parameters on the performance of composites from 3D orthogonal woven preforms [PhD dissertation]. NC State University.
- Naranjo-Lozada, J., Ahuett-Garza, H., Orta-Castañón, P., Verbeeten, W. M. H., & Sáiz-González, D. (2019). Tensile properties and failure behavior of chopped and continuous carbon fiber composites produced by additive manufacturing. Additive Manufacturing, 26, 227–241. https://doi.org/https://doi.org/10.1016/j.addma.2018.12.020
- Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018). Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering, 143, 172–196. https://doi.org/https://doi.org/10.1016/j.compositesb.2018.02.012
- Parandoush, P., Zhou, C., & Lin, D. (2019). 3D printing of ultrahigh strength continuous carbon fiber composites. Advanced Engineering Materials, 21(2), 1800622. https://doi.org/https://doi.org/10.1002/adem.201800622
- Peng, Y., Wu, Y., Wang, K., Gao, G., & Ahzi, S. (2019). Synergistic reinforcement of polyamide-based composites by combination of short and continuous carbon fibers via fused filament fabrication. Composite Structures, 207, 232–239. https://doi.org/https://doi.org/10.1016/j.compstruct.2018.09.014
- Vigneshwaran, K., & Venkateshwaran, N. (2019). Statistical analysis of mechanical properties of wood-PLA composites prepared via additive manufacturing. International Journal of Polymer Analysis and Characterization, 24(7), 584–596. https://doi.org/https://doi.org/10.1080/1023666X.2019.1630940
- Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017). 3D printing of polymer matrix composites: A review and prospective. Composites Part B: Engineering, 110, 442–458. https://doi.org/https://doi.org/10.1016/j.compositesb.2016.11.034
- Yang, C., Tian, X., Liu, T., Cao, Y., & Li, D. (2017). 3D printing for continuous fiber reinforced thermoplastic composites: Mechanism and performance. Rapid Prototyping Journal, 23(1), 209–215. https://doi.org/https://doi.org/10.1108/RPJ-08-2015-0098
- Zhuo, P., Li, S., Ashcroft, I., Jones, A., & Pu, J. 2017. 3D printing of continuous fibre reinforced thermoplastic composites. In Proceedings of the 21st International Conference on Composite Materials, ICCM21, ID (Vol. 4265), Xi'an, China, August 20-25, 2017.