References
- Aimene, Y., Vidal-Salle, E., Hagege, B., Sidoroff, F., & Boisse, P. (2010). A hyperelastic approach for composite reinforcement large deformation analysis. Journal of Composite Materials, 44(1), 5–26. https://doi.org/https://doi.org/10.1177/0021998309345348
- Boisse, P., Aimène, Y., Dogui, A., Dridi, S., Gatouillat, S., Hamila, N., Khan, M. A., Mabrouki, T., Morestin, F., & Vidal-Sallé, E. (2010). Hypoelastic, hyperelastic, discrete and semi-discrete approaches for textile composite reinforcement forming. International Journal of Material Forming, 3(S2), 1229–1240. https://doi.org/https://doi.org/10.1007/s12289-009-0664-9
- Boisse, P., Hamila, N., Helenon, F., Hagege, B., & Cao, J. (2008). Different approaches for woven composite reinforcement forming simulation. International Journal of Material Forming, 1(1), 21–29. https://doi.org/https://doi.org/10.1007/s12289-008-0002-7
- ElMessiry, M. (2017). Sheet forming of woven fabric composite by combined cyclic stretch and deep drawing. The Journal of the Textile Institute, 108(9), 1618–1627. https://doi.org/https://doi.org/10.1080/00405000.2016.1271521
- Erol, O., Powers, B. M., & Keefe, M. (2017). A macroscopic material model for woven fabrics based on mesoscopic saw-tooth unit cell. Composite Structures, 180, 531–541. https://doi.org/https://doi.org/10.1016/j.compstruct.2017.08.031
- Fang, H., Palta, E., & Gutowski, M. (2017). Numerical simulation of high-speed impacts involving metallic and non-metallic materials. International Journal of Computational Methods and Experimental Measurements, 6(3), 463–475. https://doi.org/https://doi.org/10.2495/CMEM-V6-N3-463-475
- Fein, J. (2012). Improvements in numerical modeling methodology of dry woven fabrics for aircraft engine containment systems. Arizona State University.
- Hill, J. L. (2016). Mechanical property determination for flexible material systems. Georgia Institute of Technology.
- Ivanov, I., & Tabiei, A. (2004). Loosely woven fabric model with viscoelastic crimped fibres for ballistic impact simulations. International Journal for Numerical Methods in Engineering, 61(10), 1565–1583. https://doi.org/https://doi.org/10.1002/nme.1113
- Jauffrès, D., Sherwood, J. A., Morris, C. D., & Chen, J. (2010). Discrete mesoscopic modeling for the simulation of woven-fabric reinforcement forming. International Journal of Material Forming, 3(S2), 1205–1216. https://doi.org/https://doi.org/10.1007/s12289-009-0646-y
- Klöppel, T., Knust, G., Liebold, C., & Haufe, A. (2014). Implementation and validation of a new anisotropic constitutive model for thermoplastic pre-pregs in ls-dyna. 35th International Technical Conference & Forum, Paris, France.
- Leutz, D. M. (2016). Forming simulation of AFP material layups: Material characterization, simulation and validation. Technischen Universitat Munchen.
- Livermore Software Technology Corporations (LSTC). (2018). LS-DYNA keyword user’s manual - Volume II.
- Mohammed, U., Lekakou, C., & Bader, M. G. (2000). Experimental studies and analysis of the draping of woven fabrics. Composites Part A: Applied Science and Manufacturing, 31(12), 1409–1420. https://doi.org/https://doi.org/10.1016/S1359-835X(00)00080-4
- Nishi, M., Hirashima, T., & Wang, S. (2016). Constitutive modeling for composite forming simulation and development of a tool for composite material design. 14th International LS-DYNA Users Conference, Detroit, USA.
- Nishi, M., Kaburagi, T., Kurose, M., Hirashima, T., & Kurasiki, T. (2014). Forming simulation of thermoplastic pre-impragnated textile composite. International Journal of Fashion and Textile Engineering, 8, 779–787.
- Owlia, E., Najar, S. S., & Tavana, R. (2020). Experimental and macro finite element modeling studies on conformability behavior of woven nylon 66 composite reinforcement. The Journal of the Textile Institute, 111(6), 874–881. https://doi.org/https://doi.org/10.1080/00405000.2019.1670923
- Peng, X., & Cao, J. (2002). A dual homogenization and finite element approach for material characterization of textile composites. Composites Part B: Engineering, 33(1), 45–56. https://doi.org/https://doi.org/10.1016/S1359-8368(01)00052-X
- Peng, X., & Ding, F. (2011). Validation of a non-orthogonal constitutive model for woven composite fabrics via hemispherical stamping simulation. Composites Part A: Applied Science and Manufacturing, 42(4), 400–407. https://doi.org/https://doi.org/10.1016/j.compositesa.2010.12.014
- Peng, X., Guo, Z., Du, T., & Yu, W. R. (2013). A simple anisotropic hyperelastic constitutive model for textile fabrics with application to forming simulation. Composites Part B: Engineering, 52, 275–281. https://doi.org/https://doi.org/10.1016/j.compositesb.2013.04.014
- Sathishkumar, T. P., Satheeshkumar, S., & Naveen, J. (2014). Glass fiber-reinforced polymer composites – A review. Journal of Reinforced Plastics and Composites, 33(13), 1258–1275. https://doi.org/https://doi.org/10.1177/0731684414530790
- Shahkarami, A., & Vaziri, R. (2007). A continuum shell finite element model for impact simulation of woven fabrics. International Journal of Impact Engineering, 34(1), 104–119. https://doi.org/https://doi.org/10.1016/j.ijimpeng.2006.06.010
- Sienkiewicz, M., Krzesiński, G., Marek, P., & Zagrajek, T. (2020). FEM modeling of the delamination process in fabric composites. Materials Research, 23(3), 1–8. https://doi.org/https://doi.org/10.1590/1980-5373-mr-2019-0675
- Tabiei, A., & Ivanov, I. (2002). Computational micro-mechanical model of flexible woven fabric for finite element impact simulation. International Journal for Numerical Methods in Engineering, 53(6), 1259–1276. https://doi.org/https://doi.org/10.1002/nme.321
- Vanclooster, K. (2010). Forming of multilayered fabric reinforced thermoplastic composites. Katholieke Universiteit Leuven.
- Xue, P., Peng, X., & Cao, J. (2003). A non-orthogonal constitutive model for characterizing woven composites. Composites Part A: Applied Science and Manufacturing, 34(2), 183–193. https://doi.org/https://doi.org/10.1016/S1359-835X(02)00052-0
- Zhang, W. (2019). Fundamentals of thermoforming processes of carbon fiber reinforced plastic (CFRP) parts. Northwestern.
- Ziegs, J. P., Weck, D., Gude, M., & Kastner, M. (2018). Numerical modeling of single-step thermoforming of a hybrid metal/frp lightweight structure. 18th European Conference on Composite Materials, Athen, Greece.