Comparison of tensile properties of needle punched nonwoven fabric produced by bi-directional and unidirectional barb needles employing response surface methodology

References

• Anandjiwala, R. D., & Boguslavsky, L. (2008). Development of needle-punched nonwoven fabrics from flax fibers for air filtration applications. Textile Research Journal, 78(7), 614–624. https://doi.org/10.1177/0040517507081837
   Web of Science ®Google Scholar
• Batra, S. K., & Pourdeyhimi, B. (2012). Introduction to nonwovens technology. DEStech Publications, Inc.
   Google Scholar
• Çinçik, E., & Koç, E. (2012). An analysis on air permeability of polyester/viscose blended needle-punched nonwovens. Textile Research Journal, 82(5), 430–442. https://doi.org/10.1177/0040517511414977
   Web of Science ®Google Scholar
• Das, D., Ishtiaque, S., & Yadav, S. (2014). Evaluation of fibre orientation in fibrewebs. Indian journal of fiber & textile research, 39, 9–13.
   Google Scholar
• Davey, C., Turbak, A., & Vigo, T. (1989). Nonwovens: An advanced tutorial (pp. 159–172). Atlanta, GA: TAPPI press.
   Google Scholar
• Dhange, V., & Kadole, P. (2018). A study of tensile properties of needle punched nonwovens. Man-Made Textiles in India, 46(6), 196–200.
   Google Scholar
• Ghane, M., Saghafi, R., Zarrebini, M., & Semnani, D. (2011). Evaluation of bending modulus of needle-punched fabrics using two simply supported beam method. Fibres & Textiles in Eastern Europe, 19(4), 87.
   Web of Science ®Google Scholar
• Ghosh, R. (2014). Nonwoven fabric and the difference between bonded and needle punched non woven fabrics. IOSR Journal of Polymer and Textile Engineering, 1(2), 31–33. https://doi.org/10.9790/019X-0123133
   Google Scholar
• Ghosh, S., Talukdar, M., & De, P. (1994). Effect of number of passes on basic physical properties of nonwoven needle-punched fabrics. Indian Journal of Fiber & Textile Research, 19, 61–66.
   Google Scholar
• Ghosh, S., Talukdar, M., & Dey, P. (1995). Effect of number of passes on tensile and tear properties of nonwoven needle-punched fabrics. Indian journal of fiber & textile research, 20, 145–149.
   Google Scholar
• Hearle, J., & Choudhari, T. (1969). 35—A study of needled fabrics: Part VII: The transfer of fibres through the web by needling. Journal of the Textile Institute, 60(11), 478–496. https://doi.org/10.1080/00405006908629951
   Web of Science ®Google Scholar
• Hearle, J., & Purdy, A. (1971). The structure of needle punched fabric. Fibre Science and Technology, 4(2), 81–100. https://doi.org/10.1016/0015-0568(71)90014-5
   Google Scholar
• Hearle, J., Sultan, M., & Choudhari, T. (1968). 9—A study of needled fabrics. Part II: Effects of the needling process. Journal of the Textile Institute, 59(2), 103–116. https://doi.org/10.1080/00405006808659970
   Web of Science ®Google Scholar
• Jeddi, A. A., Kim, H., & Pourdeyhimi, B. (2001). Measurement of fiber orientation in nonwovens: Optical Fourier transform. International Nonwovens Journal, 10(3), 1558925001OS-1501000306. https://doi.org/10.1177/1558925001OS-01000306
   Google Scholar
• Miao, M. (2004). An experimental study of the needled nonwoven process Part II: Fiber transport by barbed needles. Textile Research Journal, 74(5), 394–398. https://doi.org/10.1177/004051750407400504
   Web of Science ®Google Scholar
• Midha, V. K., & Mukhopadyay, A. (2005). Bulk and physical properties of needle-punched nonwoven fabrics. Indian Journal of Fiber & Textile Research, 30, 218–229.
   Google Scholar
• Mrština, V., & Fejgl, F. (1990). Needle punching textile technology. Amsterdam: Elsevier.
   Google Scholar
• Patel, B. M., & Bhrambhatt, D. (2008). Nonwoven Technology for Unconventional Fabrics (pp. 1–54). London, UK: Bloomsbury Publishing.
   Google Scholar
• Pividal, P., & Rocha, A. (2021). Development and mechanical characterization of needle-punched kapok-flax nonwovens for technical uses. Journal of Natural Fibers, 18(5), 705–716. https://doi.org/10.1080/15440478.2019.1645790
   Web of Science ®Google Scholar
• Pourdeyhimi, B. (2004). Nonwovens and traditional textile know-how. Textile World, 154(8), 42–45.
   Google Scholar
• Pourdeyhimi, B., & Dent, R. (1997). Measuring fiber orientation in nonwovens part IV: Flow field analysis. Textile Research Journal, 67(3), 181–187. https://doi.org/10.1177/004051759706700304
   Web of Science ®Google Scholar
• Pourdeyhimi, B., Dent, R., & Davis, H. (1997). Measuring fiber orientation in nonwovens part III: Fourier transform. Textile Research Journal, 67(2), 143–151. https://doi.org/10.1177/004051759706700211
   Web of Science ®Google Scholar
• Pourdehyhimi, B., Dent, R., Jerbi, A., Tanaka, S., & Deshpande, A. (1999). Measuring fiber orientation in nonwovens part V: Real webs. Textile Research Journal, 69(3), 185–192. https://doi.org/10.1177/004051759906900305
   Web of Science ®Google Scholar
• Pourdeyhimi, B., Ramanathan, R., & Dent, R. (1996a). Measuring fiber orientation in nonwovens: Part I: Simulation. Textile Research Journal, 66(11), 713–722. https://doi.org/10.1177/004051759606601107
   Web of Science ®Google Scholar
• Pourdeyhimi, B., Ramanathan, R., & Dent, R. (1996b). Measuring fiber orientation in nonwovens: Part II: Direct tracking. Textile Research Journal, 66(12), 747–753. https://doi.org/10.1177/004051759606601202
   Web of Science ®Google Scholar
• Ray, S. C., & Ghosh, P. (2017). Studies on nature of anisotropy of tensile properties and fibre orientation in cross-laid needle-punched nonwoven fabrics. Indian Journal of Fibre & Textile Research (IJFTR), 42(2), 160–167.
   Web of Science ®Google Scholar
• Roy, A. N., & Ray, P. (2009a). Optimization of jute needle-punched nonwoven fabric properties: Part I—Tensile properties. Journal of Natural Fibers, 6(3), 221–235. https://doi.org/10.1080/15440470903127901
   Web of Science ®Google Scholar
• Roy, A. N., & Ray, P. (2009b). Optimization of jute needle-punched nonwoven fabric properties: Part II—Some mechanical and functional properties. Journal of Natural Fibers, 6(4), 303–318. https://doi.org/10.1080/15440470903339514
   Web of Science ®Google Scholar
• Roy, R., & Ishtiaque, S. (2019a). Effect of fibre orientation on mechanical and functional properties of needle-punched nonwoven. Indian Journal of Fibre & Textile Research (IJFTR), 44(3), 321–328.
   Web of Science ®Google Scholar
• Roy, R., & Ishtiaque, S. (2019b). Influence of punching parameters on fibre orientation and related physical and mechanical properties of needle punched nonwoven. Fibers and Polymers, 20(1), 191–198. https://doi.org/10.1007/s12221-019-8784-4
   Web of Science ®Google Scholar
• Roy, R., & Ishtiaque, S. (2020). Optimal design of a filter media by tuning the structure of needle punched nonwoven: Influence of carding parameters. Fibers and Polymers, 21(9), 2125–2137. https://doi.org/10.1007/s12221-020-9680-7
   Web of Science ®Google Scholar
• Roy, R., Ishtiaque, S., & Dixit, P. (2022). Impact of fibre orientation on thickness and tensile strength of needle-punched nonwoven: Optimization of carding parameters. Journal of Industrial Textiles, 51(3_suppl), 4801S–4817S. https://doi.org/10.1177/1528083720910706
   Web of Science ®Google Scholar
• Saghafi, R., Zarrebini, M., & Moezzi, M. (2017). Mechanical properties of needle-punched fabrics in relation to fiber orientation. Journal of Textiles and Polymers, 5(1), 48.
   Google Scholar
• Saville, B. (1999). Physical testing of textiles. Elsevier.
   Google Scholar
• Tausif, M., & Russell, S. 2010. Coloured tracer fibre migration studies in nonwoven materials. Conference Paper. The CREATE 2010 Conference Proceedings -Colour Coded’ Gjøvik, Norway, pp. 385–390.
   Google Scholar
• Wang, R., Xu, B., & Li, C. (2014). Accurate fiber orientation measurements in nonwovens using a multi-focus image fusion technique. Textile Research Journal, 84(2), 115–124. https://doi.org/10.1177/0040517513490056
   Web of Science ®Google Scholar
• Watanabe, A., Miwa, M., Yokoi, T., & Merati, A. A. (2004). Predicting the penetrating force and number of fibers caught by a needle barb in needle punching. Textile Research Journal, 74(5), 417–425. https://doi.org/10.1177/004051750407400508
   Web of Science ®Google Scholar
• Watanabe, A., Miwa, M., Yokoi, T., & Nakayama, A. (1998). Fatigue behavior of aramid nonwoven fabrics under hot-press conditions: Part V: Effect of punching density on mechanical properties. Textile Research Journal, 68(3), 171–178. https://doi.org/10.1177/004051759806800304
   Web of Science ®Google Scholar
• Wilhelm, F., Albricht., & W., Kittelmann. (2003). Nonwoven fabrics. Wiley.
   Google Scholar
• Xu, B., & Ting, Y.-L. (1995). Measuring structural characteristics of fiber segments in nonwoven fabrics. Textile Research Journal, 65(1), 41–48. https://doi.org/10.1177/004051759506500106
   Web of Science ®Google Scholar
• Yilmaz, K. B., Sabuncuoglu, B., Yildirim, B., & Silberschmidt, V. V. (2020). A brief review on the mechanical behavior of nonwoven fabrics. Journal of Engineered Fibers and Fabrics, 15, 155892502097019. https://doi.org/10.1177/1558925020970197
   Web of Science ®Google Scholar