Rotational vibration absorber for the mitigation of rail rutting corrugation

References

• Grassie , S. L. and Kalousek , J. 1993 . Rail corrugation: characteristics, causes and treatments . J. Rail Rapid Transit. , 207 : 57 – 68 .
   Google Scholar
• Tassilly , E. and Vincent , N. 1991 . Rail corrugations: analytical model and field tests . Wear , 144 : 163 – 178 .
   Web of Science ®Google Scholar
• Tassilly , E. and Vincent , N. 1991 . A linear model for the corrugation of rails . J. Sound Vib. , 150 : 25 – 45 .
   Web of Science ®Google Scholar
• Grassie , S. L. 2005 . Rail corrugation: advances in measurement, understanding and treatment . Wear , 258 : 1224 – 1234 .
   Web of Science ®Google Scholar
• Transit Cooperative Research Program. Report RRD-26 (Project D-01): Rail corrugation mitigation in transit, June 1998
   Google Scholar
• Chollet , H. 1991 . Etude En Similitude Mécanique Des Efforts Tangents Au Contact Roue-Rail , Université Paris 6 . Ph.D. thesis
   Google Scholar
• Brockley , C. A. and Ko , P. L. 1988 . An investigation of rail corrugation using friction-induced vibration theory . Wear , 128 : 99 – 106 .
   Web of Science ®Google Scholar
• Hayes , W. F. and Tucker , H. G. 1991 . Wheelset-track resonance as a possible source of corrugation wear . Wear , 144 : 211 – 226 .
   Web of Science ®Google Scholar
• Matsumoto , A. , Sato , Y. , Tanimoto , M. and Kang , Q. 1996 . Study on the formation mechanism of rail corrugation on curved track . Vehicle Syst. Dyn. Suppl. , 25 : 450 – 465 .
   Web of Science ®Google Scholar
• Matsumoto , A. , Sato , Y. , Hiroyuki , O. , Tanimoto , M. , Oka , Y. and Miyauchi , E. 2002 . Formation mechanism and countermeasures of rail corrugation on curved track . Wear , 253 : 178 – 184 .
   Web of Science ®Google Scholar
• Grassie , S. L. and Elkins , J. A. 1998 . Corrugation on North American transit lines . Vehicle Syst. Dyn. Suppl. , 28 : 5 – 17 .
   Web of Science ®Google Scholar
• Ripke , B. and Hempelmann , K. 1994 . Model prediction of track loads and rail corrugation . Railway Gazette , : 447 – 450 .
   Google Scholar
• Hempelmann , K. and Knothe , K. 1996 . An extended linear model for the prediction of short pitch corrugation . Wear , 191 : 161 – 169 .
   Web of Science ®Google Scholar
• Egana , J. I. , Vinolas , J. and Seco , M. 2006 . Investigation of the influence of rail pad stiffness on rail corrugation on a transit system . Wear , 261 : 216 – 224 .
   Web of Science ®Google Scholar
• Tomeoka , M. , Kabe , N. , Tanimoto , M. , Miyauchi , E. and Nakata , M. 2002 . Friction control between wheel and rail by means of on-board lubrication . Wear , 253 : 124 – 129 .
   Web of Science ®Google Scholar
• Eadie , D. T. , Kalousek , J. and Chiddick , K. C. 2002 . The role of high positive friction (HPF) modifier in the control of short pitch corrugations and related phenomena . Wear , 253 : 185 – 192 .
   Web of Science ®Google Scholar
• Matsumoto , A. , Sato , Y. , Ohno , H. , Tomeoka , M. , Matsumoto , K. , Ogino , T. , Tanimoto , M. , Oka , Y. and Okano , M. 2005 . Improvement of bogie curving performance by using friction modifier to rail/wheel interface: Verification by full-scale rolling stand test . Wear , 258 : 1201 – 1208 .
   Web of Science ®Google Scholar
• Transit Cooperative Research Programme . 2001 . Wheel and rail vibration absorber testing and demonstration . Tech. Rep. , 67
   Google Scholar
• Maes , J. and Sol , H. 2003 . A double tuned rail damper–increased damping at the two first pinned-pinned frequencies . J. Sound Vibration , 267 : 721 – 737 .
   Web of Science ®Google Scholar
• Ormondroyd , J. and Den Hartog , J. P. 1928 . The theory of the damped vibration absorber . Trans. Am. Soc. Mech. Eng. , 50 : 7
   Google Scholar
• Timoshenko , S. and Young , D. H. 1948 . Advanced Dynamics , New York : McGraw-Hill .
   Google Scholar
• Wang , Y. Z. and Cheng , S. H. 1989 . The optimal design of dynamic absorber in the time domain and the frequency domain . Appl. Acoust. , 28 : 67 – 78 .
   Web of Science ®Google Scholar
• Connor , J. 1999 . Introduction to Structural Motion Control , New York : Prentice Hall .
   Google Scholar
• Patent WO 2004/007217. Reduction of torsional vibration in rail vehicle wheel set
   Google Scholar
• Hempelmann , K. , Hiss , F. and Ripke , B. 1991 . The formation of wear patterns on rail tread . Wear , 144 : 179 – 195 .
   Web of Science ®Google Scholar
• Kalker , J. J. 2000 . “ Rolling contact phenomena ” . In Rolling Contact Phenomena Edited by: Jacobs , B. and Kalker , J. J. New York
   Google Scholar
• Krause , H. and Poll , G. 1986 . Wear of wheel–rail surfaces . Wear , 113 : 103 – 122 .
   Web of Science ®Google Scholar
• Jaschinski , A. , Chollet , H. , Iwicki , S. , Wickens , A. and Von Wurzen , J. 1999 . The application of roller rigs to railway vehicle dynamics . Vehicle Syst. Dynam. , 31 : 345 – 392 .
   Web of Science ®Google Scholar
• Kalker , J. J. 1979 . Survey of wheel–rail contact theory . Vehicle Syst. Dynam. , 5 : 317 – 358 .
   Web of Science ®Google Scholar
• Matsumoto , A. , Sato , Y. , Nakata , M. , Tanimoto , M. and Qi , K. 1996 . Wheel–rail contact mechanics at full scale on the test stand . Wear , 191 : 101 – 106 .
   Web of Science ®Google Scholar