The influence of bicycle fork bending on brake control

References

• Council of European Union. Council regulation (EU) no 168/2013; 2013.
   Google Scholar
• Savaresi S, Tanelli M. Active braking control systems design for vehicles. London: Springer; 2010. (Advances in Industrial Control).
   Google Scholar
• D'Avico L, Tanelli M, Savaresi S, et al. A deceleration-based algorithm for anti-skid control of aircraft. IFAC-PapersOnLine. 2017;50(1):14168–14173. 20th IFAC World Congress. doi: 10.1016/j.ifacol.2017.08.2082
   Google Scholar
• D'Avico L, Tanelli M, Savaresi S, et al. An anti-skid braking system for aircraft via mixed-slip-deceleration control, sliding mode observer. In: 2017 IEEE 56th Annual Conference on Decision and Control (CDC); Dec; 2017. p. 4503–4508.
   Google Scholar
• D'Avico L, Tanelli M, Savaresi S. Experimental validation of landing-gear dynamics for anti-skid control design. In: 2018 European Control Conference (ECC); Jun; 2018. p. 2751–2756.
   Google Scholar
• Tunay I. Antiskid control for aircraft via extremum-seeking. In: Proceedings of the 2001 American Control Conference; Vol. 2; Jun; 2001. p. 665–670.
   Google Scholar
• Corno M, Savaresi SM, Tanelli M, et al. On optimal motorcycle braking. Control Eng Pract. 2008;16(6):644–657. doi: 10.1016/j.conengprac.2007.08.001
   Web of Science ®Google Scholar
• Corno M, Tanelli M, Savaresi S. High performance braking for racing motorcycles. In: 2007 European Control Conference (EEC); Jul; Kos, Greece; 2007. p. 5225–5232.
   Google Scholar
• Cossalter V. Motorcycle dynamics. Eastbourne: Gardners; 2006.
   Google Scholar
• Tanelli M, Savaresi S, Corno M. Modelling, simulation and control of two-wheeled vehicles. Chichester: Wiley; 2014. (Automotive Series).
   Google Scholar
• Stoffregen J. Motorradtechnik: Grundlagen und konzepte von Motor, Antrieb und Fahrwerk. Wiesbaden: Vieweg+Teubner; 2012.
   Google Scholar
• Champoux Y, Richard S, Drouet JM. Bicycle structural dynamics. Sound Vib. 2007 Jul;41:16–24.
   Web of Science ®Google Scholar
• Baldissera P, Delprete C. Structural design of a composite bicycle fork. Mater Design. 2014;60:102–107. doi: 10.1016/j.matdes.2014.03.036
   Web of Science ®Google Scholar
• Williams T. Influence of frame stiffness and rider position on bicycle dynamics: an analytical study [master thesis]. Milwaukee (WI): The University of Wisconsin-Milwaukee; 2015.
   Google Scholar
• Maier O. Modellbasierte entwicklung eines aktiven sicherheitssystems für elektrifizierte fahrräder. Karlsruher Institut für Technologie; 2018. Karlsruher Schriftenreihe Fahrzeugsystemtechnik/Institut für Fahrzeugsystemtechnik.
   Google Scholar
• Corno M, D'Avico L, Savaresi S. An anti-lock braking system for bicycles. In: IEEE Conference on Control Technology and Applications; Aug; 2018. p. 834–839.
   Google Scholar
• Plöchl M, Edelmann J, Angrosch B, et al. On the wobble mode of a bicycle. Veh Syst Dyn. 2012;50(3):415–429. doi: 10.1080/00423114.2011.594164
   Web of Science ®Google Scholar
• The Effect of Front Fork Compliance on the Stability of Bicycles; Vol. 17th International Conference on Advanced Vehicle Technologies; 6; 2015.
   Google Scholar
• Rallo G, Formentin S, Corno M, et al. Real-time cycling cadence estimation via wheel speed measurement. Int J Adapt Control Signal Process. 2018;32(7):1052–1066. doi: 10.1002/acs.2885
   Web of Science ®Google Scholar
• Rallo G, Formentin S, Savaresi SM. On-line model-based wheel speed filtering for geometrical error compensation. Mechatronics. 2018;50:189–195. doi: 10.1016/j.mechatronics.2018.02.003
   Web of Science ®Google Scholar
• Rallo G, Formentin S, Corno M, et al. Real-time pedaling rate estimation via wheel speed filtering. IFAC-PapersOnLine. 2017 Jun;50(1):6010–6015. 20th IFAC World Congress. doi: 10.1016/j.ifacol.2017.08.1439
   Google Scholar
• Corno M, D'Avico L, Panzani G, et al. A haptic-based, safety-oriented, braking assistance system for road bicycles. In: IEEE Intelligent Vehicles Symposium; Jun; 2017. p. 1189–1194.
   Google Scholar
• Klug S, Moia A, Verhagen A, et al. Effectiveness of actuating on rectilinear bicycle braking dynamics. IFAC-PapersOnLine. 2017 Jun;50(1):972–979. 20th IFAC World Congress. doi: 10.1016/j.ifacol.2017.08.173
   Google Scholar
• Klug S, Moia A, Verhagen A, et al. Control-oriented modeling and validation of bicycle curve dynamics with focus on lateral tire parameters. In: IEEE Conference on Control Technology and Applications; Aug; Kohala Coast, Hawai'i, USA; 2017. p. 86–93.
   Google Scholar
• Pacejka H, Besselink I. Tire and vehicle dynamics. Oxford: Butterworth-Heinemann; 2012.
   Google Scholar
• Wang E, Hull M. A dynamic system model of an off-road cyclist. Biomech Eng. 1996;33:263–264.
   Google Scholar
• Reif K, Dietsche KH. Automotive handbook. Karlsruhe: Robert Bosch GmbH; 2014.
   Google Scholar
• Kiencke U, Nielsen L. Automotive control systems. Berlin: Springer; 2000.
   Google Scholar
• Tanelli M, Osorio G, Savaresi S, Di Bernardo M, et al. Existence, stability and robustness analysis of limit cycles in hybrid anti-lock braking systems. Int J Control. 2009;82(4):659–678. doi: 10.1080/00207170802203598
   Web of Science ®Google Scholar
• Tanelli M, Osorio G, di Bernardo M, et al. Limit cycles analysis in hybrid anti-lock braking systems. In: 46th IEEE Conference on Decision and Control; Dec; 2007. p. 3865–3870.
   Google Scholar
• Savaresi SM, Tanelli M, Cantoni C. Mixed slip-deceleration control in automotive braking systems. J Dyn Sys Meas Control. 2007 Jan;129:20–31. doi: 10.1115/1.2397149
   Web of Science ®Google Scholar