A mathematically-based study of the random wheel-rail contact irregularity by wheel out-of-roundness

References

• Arslan MA, Kayabasi O. 3-D rail-wheel contact analysis using FEA. Adv Eng Softw. 2012;45:325–331. doi: https://doi.org/10.1016/j.advengsoft.2011.10.009
   Web of Science ®Google Scholar
• Bowe CJ, Mullarkey TP. Wheel-rail contact elements incorporating irregularities. Adv Eng Softw. 2005;36:827–837. doi: https://doi.org/10.1016/j.advengsoft.2005.03.026
   Web of Science ®Google Scholar
• Brake DW, Chiu WK. A review of the effects of out-of-round wheels on track and vehicle components. Proc Inst Mech Eng F J Rail Rapid Transit. 2005;219:151–175. doi: https://doi.org/10.1243/095440905X8853
   Web of Science ®Google Scholar
• Han LL, Jing L, Liu K. A dynamic simulation of the wheel-rail impact caused by a wheel flat using a 3-D rolling contact model. J Mod Transp. 2017;25:124–131. doi: https://doi.org/10.1007/s40534-017-0131-0
   Google Scholar
• Yang XW, Zhai WM. Theoretical calculation and control study on the wheel/ rail noises of high speed railway. China Railw Sci. 2011;32(1):133–135.
   Google Scholar
• Liu Y, Liu JX, Guo YJ. Study on dynamic simulation input form of locomotive wheel flat. Appl Mech Mater. 2012;215–216:946–949. doi: https://doi.org/10.4028/www.scientific.net/AMM.215-216.946
   Google Scholar
• Wang YJ, Zeng J, Gao H, et al. Analysis of wheel/rail impact induced by wheel flats. J Southwest Jiaotong Univ. 2014;49(4):700–705.
   Google Scholar
• Bogdevicius M, Zygiene R, Bureika G, et al. An analytical mathematical method for calculation of the dynamic wheel–rail impact force caused by wheel flat. Veh Syst Dyn. 2016;54(5):689–705. doi: https://doi.org/10.1080/00423114.2016.1153114
   Web of Science ®Google Scholar
• Kato T, Sugeta A, Nakayama E. Investigation of influence of white layer geometry on spalling property in railway wheel steel. Wear. 2011;271:400–407. doi: https://doi.org/10.1016/j.wear.2010.10.024
   Web of Science ®Google Scholar
• Kato T, Kato H, Makino T. Effect of elevated temperature on shelling property of railway wheel steel. Wear. 2016;366–367:359–367. doi: https://doi.org/10.1016/j.wear.2016.04.015
   Web of Science ®Google Scholar
• Makino T, Yamamoto M, Fujimura T. Effect of material on spalling properties of railroad wheels. Wear. 2002;253:284–290. doi: https://doi.org/10.1016/S0043-1648(02)00117-5
   Web of Science ®Google Scholar
• Santos FdC, dos Santos AAd Jr, Bruni F, et al. Evaluation of subsurface contact stresses in railroad wheels using an elastic half-space model. J Braz Soc Mech Sci Eng. 2004;26(4):420–429. doi: https://doi.org/10.1590/S1678-58782004000400007
   Google Scholar
• Liu W, Ma WH, Luo SH, et al. Research into the problem of wheel tread spalling caused by wheelset longitudinal vibration. Veh Syst Dyn. 2015;53(4):546–567. doi: https://doi.org/10.1080/00423114.2015.1008015
   Web of Science ®Google Scholar
• Nielsen JCO, Lunden R, Johansson A, et al. Train-track interaction and mechanisms of irregular wear on wheel and rail surfaces. Veh Syst Dyn. 2003;40(1–3):3–54. doi: https://doi.org/10.1076/vesd.40.1.3.15874
   Web of Science ®Google Scholar
• Morys B. Enlargement of out-of-round wheel profiles on the high speed trains. J Sound Vib. 1999;227(5):965–978. doi: https://doi.org/10.1006/jsvi.1999.2055
   Web of Science ®Google Scholar
• Liu XY, Zhai WM. Analysis of vertical dynamic wheel/rail interaction caused by polygonal wheels on high-speed trains. Wear. 2014;314:282–290. doi: https://doi.org/10.1016/j.wear.2013.11.048
   Web of Science ®Google Scholar
• Chen W, Luo R, Zeng J. Effect of high order polygons of wheels for high speed trains on dynamics performance of vehicles. Railw Veh. 2014;52(12):4–8.
   Google Scholar
• Polach O. Creep forces in simulations of traction vehicles running on adhesion limit. Wear. 2005;258:992–1000. doi: https://doi.org/10.1016/j.wear.2004.03.046
   Web of Science ®Google Scholar
• Torstensson PT, Nielsen JCO. Simulation of dynamic vehicle–track interaction on small radius curves. Veh Syst Dyn. 2011;49:1711–1732. doi: https://doi.org/10.1080/00423114.2010.499468
   Web of Science ®Google Scholar
• Knothe KL, Grassie SL. Modelling of railway track and vehicle/track interaction at high frequencies. Veh Syst Dyn. 1993;22:209–262. doi: https://doi.org/10.1080/00423119308969027
   Web of Science ®Google Scholar
• Kaiser I, Popp K. Interaction of elastic wheelsets and elastic rails: modelling and simulation. Veh Syst Dyn. 2006;44:932–939. doi: https://doi.org/10.1080/00423110600907675
   Web of Science ®Google Scholar
• Su XY, Zhou L, Jing L, et al. Experimental investigation and constitutive description of railway wheel/rail steels under medium strain-rate tensile loading. J Mater Eng Perform. 2020;29:2015–2025. doi: https://doi.org/10.1007/s11665-020-04720-1
   Web of Science ®Google Scholar
• Jing L, Su XY, Zhao LM. The dynamic compressive behavior and constitutive modeling of D1 railway wheel steel over a wide range of strain rates and temperatures. Results Phys. 2017;7:1452–1461. doi: https://doi.org/10.1016/j.rinp.2017.04.015
   Web of Science ®Google Scholar
• Li ZL, Zhao X, Coenraad E, et al. An investigation into the causes of squats-correlation analysis and numerical modeling. Wear. 2008;265(9):1349–1355. doi: https://doi.org/10.1016/j.wear.2008.02.037
   Web of Science ®Google Scholar
• Li ZL, Zhao X, Rolf D, et al. Differential wear and plastic deformation as causes of squat at track local stiffness change combined with other track short defects. Veh Syst Dyn. 2008;46(S1):237–246. doi: https://doi.org/10.1080/00423110801935855
   Web of Science ®Google Scholar
• Li ZL, Zhao X, Coenraad E, et al. The dynamic stress state of the wheel-rail contact. Proceedings of 2th International Conference on Continuum Mechanics; 2007. p. 127–133.
   Google Scholar
• Li ZL, Zhao X. The solution of frictional wheel-rail rolling contact with a 3D transient finite element model. validation and error analysis. Wear. 2011;271(1–2):444–452. doi: https://doi.org/10.1016/j.wear.2010.10.007
   Web of Science ®Google Scholar
• Ma XQ, Jing L, Han LL. A computational simulation study on the dynamic response of high-speed wheel–rail system in rolling contact. Adv Mech Eng. 2018;10:1–11.
   Web of Science ®Google Scholar
• Jing L, Han LL. Further study on the wheel-rail impact response induced by a single wheel flat: the coupling effect of strain rate and thermal stress. Veh Syst Dyn. 2017;55:1946–1972. doi: https://doi.org/10.1080/00423114.2017.1340651
   Web of Science ®Google Scholar
• Han LL, Jing L, Zhao LM. Finite element analysis of the wheel–rail impact behavior induced by a wheel flat for high-speed trains: the influence of strain rate. Proc Inst Mech Eng F J Rail Rapid Transit. 2018;232:990–1004. doi: https://doi.org/10.1177/0954409717704790
   Web of Science ®Google Scholar
• Wu TX, Thompson DJ. A hybrid model for the noise generation due to railway wheel flats. J Sound Vib. 2002;251(1):115–139. doi: https://doi.org/10.1006/jsvi.2001.3980
   Web of Science ®Google Scholar
• Kanoje NK, Sharma SC, Harsha SP. Wheel-rail and wheel-flat as a coupled system: contact dynamics modeling with finite element analysis. J Coupled Syst Multiscale Dyn. 2014;2(1):20–27. doi: https://doi.org/10.1166/jcsmd.2014.1036
   Google Scholar
• Liu K, Jing L. A finite element analysis-based study on the dynamic wheel–rail contact behavior caused by wheel polygonization. Proc Inst Mech Eng F J Rail Rapid Transit. 2020;234(10):1285–1298. doi: https://doi.org/10.1177/0954409719891549
   Web of Science ®Google Scholar
• L’Ecuyer P. Uniform random number generation. Ann Oper Res. 1994;53:77–120. doi: https://doi.org/10.1007/BF02136827
   Google Scholar
• Johansson A, Andersson C. Out-of-round railway wheels—a study of wheel polygonalization through simulation of three-dimensional wheel–rail interaction and wear. Veh Syst Dyn. 2005;43(8):539–559. doi: https://doi.org/10.1080/00423110500184649
   Web of Science ®Google Scholar
• Park SK, Miller KW. Random number generators: good ones are hard to find. Commun ACM. 1988;31(10):1192–1201. doi: https://doi.org/10.1145/63039.63042
   Web of Science ®Google Scholar
• L’Ecuyer P. Tables of linear congruential generators of different sizes and good lattice structure. Am Math Soc. 1999;68(225):249–260.
   Google Scholar
• Boyar J. Inferring sequences produced by a linear congruential generator missing Lou-Oder bits. J Cryptol. 1989;1:177–184. doi: https://doi.org/10.1007/BF02252875
   Google Scholar
• Marsaglia G. The structure of linear congruential sequences. In: Zaremba SK, editor. Applications of number theory to numerical analysis. New York (NY): Academic Press; 1972. p. 248–285.
   Google Scholar
• Thistleton WJ, John A. Generalized box–müller method for generating q-Gaussian random deviates. IEEE Trans Inf Theory. 2007;53(12):4805–4810. doi: https://doi.org/10.1109/TIT.2007.909173
   Web of Science ®Google Scholar
• LS-DYNA Theory Manual. 01/27/15, Livermore Software Technology Corporation.
   Google Scholar
• LS-DYNA Keyword User’s Manual, Volume 1. 01/30/13, Livermore Software Technology Corporation.
   Google Scholar
• Vo KD, Tieu AK, Zhu HT, et al. A 3D dynamic model to investigate wheel-rail contact under high and low adhesion. Int J Mech Sci. 2014;85:63–75. doi: https://doi.org/10.1016/j.ijmecsci.2014.05.007
   Web of Science ®Google Scholar