References
- Bhardwaj, N.; Kundu, S. C. Electrospinning: A Fascinating Fiber Fabrication Technique. Biotechnol. Adv. 2010, 28, 325–347. DOI: https://doi.org/10.1016/j.biotechadv.2010.01.004.
- Casasola, R.; Thomas, N. L.; Trybala, A.; Georgiadou, S. Electrospun Poly Lactic Acid (PLA) Fibres: Effect of Different Solvent Systems on Fibre Morphology and Diameter. Polymer 2014, 55, 4728–4737. DOI: https://doi.org/10.1016/j.polymer.2014.06.032.
- Augustine, R.; Kalarikkal, N. b.; Thomas, S. c. Clogging-Free Electrospinning of Polycaprolactone Using Acetic Acid/Acetone Mixture. Polym. Plast. Technol. Eng. 2016, 55, 518–529. DOI: https://doi.org/10.1080/03602559.2015.1036451.
- Bosworth, L. A.; Downes, S. Acetone, a Sustainable Solvent for Electrospinning Poly(ε-Caprolactone) Fibres: Effect of Varying Parameters and Solution Concentrations on Fibre Diameter. J. Polym. Environ. 2012, 20, 879–886. DOI: https://doi.org/10.1007/s10924-012-0436-3.
- Malheiro, V. N.; Caridade, S. G.; Alves, N. M.; et al. New Poly(ε-Caprolactone)/Chitosan Blend Fibers for Tissue Engineering Applications. Acta Biomater. 2010, 6, 418–428. DOI: https://doi.org/10.1016/j.actbio.2009.07.012.
- Shalumon, K. T.; Anulekha, K. H.; Girish, C. M.; Prasanth, R.; Nair, S. V.; Jayakumar, R. Single Step Electrospinning of Chitosan/Poly(Caprolactone) Nanofibers Using Formic Acid/Acetone Solvent Mixture. Carbohydr. Polym. 2010, 80, 413–419. DOI: https://doi.org/10.1016/j.carbpol.2009.11.039.
- Lim, T. Y.; Poh, C. K.; Wang, W. Poly (Lactic-co-Glycolic Acid) as a Controlled Release Delivery Device. J. Mater. Sci. Mater. Med. 2009, 20, 1669–1675. DOI: https://doi.org/10.1007/s10856-009-3727-z.
- Ajalloueian, F.; Tavanai, H.; Hilborn, J.; et al. Emulsion Electrospinning as an Approach to Fabricate PLGA/Chitosan Nanofibers for Biomedical Applications. BioMed Res. Int. 2014, 2014, 1–13. DOI: https://doi.org/10.1155/2014/475280.
- Jose, M. V.; Thomas, V.; Johnson, K. T.; et al. Aligned PLGA/HA Nanofibrous Nanocomposite Scaffolds for Bone Tissue Engineering. Acta Biomater. 2009, 5, 305–315. DOI: https://doi.org/10.1016/j.actbio.2008.07.019.
- Meng, Z. X.; Xu, X. X.; Zheng, W.; et al. Preparation and Characterization of Electrospun PLGA/Gelatin Nanofibers as a Potential Drug Delivery System. Colloids Surf. B. 2011, 84, 97–102. DOI: https://doi.org/10.1016/j.colsurfb.2010.12.022.
- Huan, S.; Liu, G.; Han, G.; Cheng, W.; Fu, Z.; Wu, Q.; Wang, Q. Effect of Experimental Parameters on Morphological, Mechanical and Hydrophobic Properties of Electrospun Polystyrene Fibers. Materials 2015, 8, 2718–2734. DOI: https://doi.org/10.3390/ma8052718.
- Pattamaprom, C.; Hongrojjanawiwat, W.; Koombhongse, P.; Supaphol, P.; Jarusuwannapoo, T.; Rangkupan, R. The Influence of Solvent Properties and Functionality on the Electrospinnability of Polystyrene Nanofibers. Macromol. Mater. Eng. 2006, 291, 840–847. DOI: https://doi.org/10.1002/mame.200600135.
- Uyar, T.; Besenbacher, F. Electrospinning of Uniform Polystyrene Fibers: The Effect of Solvent Conductivity. Polymer 2008, 49, 5336–5343. DOI: https://doi.org/10.1016/j.polymer.2008.09.025.
- Xiaohua, G.; Xue, S.; Chenghua, S.; et al. Electrospinning of Poly(Butylene-Carbonate): Effect of Solvents on the Properties of the Nanofibers Film. Int. J. Electrochem. Sci. 2014, 9, 8045–8056.
- Sun, Z.; Deitzel, J. M.; Knopf, J.; Chen, X.; Gillespie, J. W. The Effect of Solvent Dielectric Properties on the Collection of Oriented Electrospun Fibers. J. Appl. Polym. Sci. 2012, 125, 2585–2594. DOI: https://doi.org/10.1002/app.35454.
- Qin, X.; Wu, D. Effect of Different Solvents on Poly(Caprolactone) (PCL) Electrospun Nonwoven Membranes. J. Therm. Anal. Calorim. 2012, 107, 1007–1013. DOI: https://doi.org/10.1007/s10973-011-1640-4.
- United States Pharmacopeia and National Formulary. Residual Solvents. The United States Pharmacopeia 2017: USP 40; The National Formulary: NF 35. United States Pharmacopeia: North Bethesda, MD, 2007; pp 1–16.
- Subramanian, A.; Krishnan, U. M.; Sethuraman, S. In Vivo Biocompatibility of PLGA-Polyhexylthiophene Nanofiber Scaffolds in a Rat Model. BioMed Res. Int. 2013, 2013, 1–8. DOI: https://doi.org/10.1155/2013/390518.
- Lee, J. Y.; Bashur, C. A.; Goldstein, A. S.; et al. Polypyrrole-Coated Electrospun PLGA Nanofibers for Neural Tissue Applications. Biomaterials 2009, 30, 4325–4335. DOI: https://doi.org/10.1016/j.biomaterials.2009.04.042.
- Ethyl Acetate. The MAK-Collection for Occupational Health and Safety; Wiley-VCH Verlag GmbH & Co. KGaA: Weinheim, Germany, 2012; pp 168–176.
- Clark, J.; Farmer, T.; Hunt, A.; Sherwood, J. Opportunities for Bio-Based Solvents Created as Petrochemical and Fuel Products Transition towards Renewable Resources. Int J Mol Sci. 2015, 16, 17101–17159. DOI: https://doi.org/10.3390/ijms160817101.
- Song, J.H.; Kim, H.E.; Kim, H.W. Production of Electrospun Gelatin Nanofiber by Water-Based co-Solvent Approach. J. Mater. Sci. Mater. Med. 2008, 19, 95–102. DOI: https://doi.org/10.1007/s10856-007-3169-4.
- Binulal, N. S.; Natarajan, A.; Menon, D.; et al. PCL-Gelatin Composite Nanofibers Electrospun Using Diluted Acetic Acid-Ethyl Acetate Solvent System for Stem Cell-Based Bone Tissue Engineering. J. Biomater. Sci, Polym. Ed. 2014, 25, 325–340. DOI: https://doi.org/10.1080/09205063.2013.859872.
- Ranganath, S. H.; Wang, C. H. Biodegradable Microfiber Implants Delivering Paclitaxel for Post-Surgical Chemotherapy against Malignant Glioma. Biomaterials 2008, 29, 2996–3003. DOI: https://doi.org/10.1016/j.biomaterials.2008.04.002.
- Jouyban, A.; Soltanpour, S.; Chan, H.-K. A Simple Relationship between Dielectric Constant of Mixed Solvents with Solvent Composition and Temperature. Int. J. Pharm. 2004, 269, 353–360. DOI: https://doi.org/10.1016/j.ijpharm.2003.09.010.
- Martínez, L. M.; Videa, M.; López-Silva, G. A.; et al. Stabilization of Amorphous Paracetamol Based Systems Using Traditional and Novel Strategies. Int. J. Pharm. 2014, 477, 294–305. [Internet]. DOI: https://doi.org/10.1016/j.ijpharm.2014.10.021.
- Gunawan, L.; Johari, G. P.; Shanker, R. M. Structural Relaxation of Acetaminophen Glass. Pharm. Res. 2006, 23, 967–979. DOI: https://doi.org/10.1007/s11095-006-9898-0.
- Di Martino, P.; Palmieri, G. F.; Martelli, S. Molecular Mobility of the Paracetamol Amorphous Form. Chem. Pharm. Bull. 2000, 48, 1105–1108. DOI: https://doi.org/10.1248/cpb.48.1105.
- Li, P.; Feng, X.; Jia, X.; Fan, Y. Influences of tensile load on in vitro degradation of an electrospun poly(l-lactide-co-glycolide) scaffold. Acta Biomaterialia. 2010, 6, 2991–2996.
- Luo, C. J.; Stride, E.; Edirisinghe, M. Mapping the Influence of Solubility and Dielectric Constant on Electrospinning Polycaprolactone Solutions. Macromolecules 2012, 45, 4669–4680. DOI: https://doi.org/10.1021/ma300656u.
- Fouad, H.; Elsarnagawy, T.; Almajhdi, F. N.; et al. Preparation and in Vitro Thermo-Mechanical Characterization of Electrospun PLGA Nanofibers for Soft and Hard Tissue Replacement. Int. J. Electrochem. Sci. 2013, 8, 2293–2304.
- Richard-Lacroix, M.; Pellerin, C. Molecular Orientation in Electrospun Fibers: From Mats to Single Fibers. Macromolecules 2013, 46, 9473–9493. DOI: https://doi.org/10.1021/ma401681m.
- Naraghi, M.; Arshad, S. N.; Chasiotis, I. Molecular Orientation and Mechanical Property Size Effects in Electrospun Polyacrylonitrile Nanofibers. Polymer 2011, 52, 1612–1618. DOI: https://doi.org/10.1016/j.polymer.2011.02.013.
- Kimura, N.; Kim, H.-K.; Kim, B.-S.; Lee, K.-H.; Kim, I.-S. Molecular Orientation and Crystalline Structure of Aligned Electrospun Nylon-6 Nanofibers: Effect of Gap Size. Macromol. Mater. Eng. 2010, 295, 1090–1096. DOI: https://doi.org/10.1002/mame.201000235.
- Wei, X.; Xia, Z.; Wong, S. C.; Baji, A. Modelling of Mechanical Properties of Electrospun Nanofibre Network. Int. J. Exp. Comput. Biomech. 2009, 1, 45. DOI: https://doi.org/10.1504/IJECB.2009.022858.
- Wong, S.-C.; Baji, A.; Leng, S. Effect of Fiber Diameter on Tensile Properties of Electrospun Poly(ɛ-Caprolactone). Polym. J. 2008, 49, 4713–4722. DOI: https://doi.org/10.1016/j.polymer.2008.08.022.
- Chan, S.; Yang, H.; Ko, F.; et al. Tensile Stress-Strain Response of Small-Diameter Electrospun Fibers. Appl. Note 2012, 1, 1–4.
- Law, K.-Y. Definitions for Hydrophilicity, Hydrophobicity, and Superhydrophobicity: Getting the Basics Right. J. Phys. Chem. Lett. 2014, 5, 686–688. DOI: https://doi.org/10.1021/jz402762h.
- Brannon-Peppas, L. Polymers in Controlled Drug Delivery. Med. Plastics Biomater. Mag. 1997, 11, 1–14.
- Leong, K. W.; Langer, R. Polymeric Controlled Drug Delivery. Adv. Drug Delivery Rev. 1988, 1, 199–233. DOI: https://doi.org/10.1016/0169-409X(88)90019-1.
- Pillay, V.; Dott, C.; Choonara, Y. E.; Tyagi, C.; Tomar, L.; Kumar, P.; Du Toit, L. C.; Ndesendo, V. M. K. A Review of the Effect of Processing Variables on the Fabrication of Electrospun Nanofibers for Drug Delivery Applications. J. Nanomater. 2013, 2013, 1–22. DOI: https://doi.org/10.1155/2013/789289.
- Zeng, J.; Yang, L.; Liang, Q.; et al. Influence of the Drug Compatibility with Polymer Solution on the Release Kinetics of Electrospun Fiber Formulation. J. Controlled Release 2005, 105, 43–51. DOI: https://doi.org/10.1016/j.jconrel.2005.02.024.