578
Views
18
CrossRef citations to date
0
Altmetric
Original Articles

Impact of Feed Spacer Filament Spacing on Mass Transport and Fouling Propensities of RO Membrane Surfaces

, &

References

  • Baker, J. S., Judd, S. J., and Parsons, S. A. (1997). Antiscale magnetic pretreatment of reverse osmosis feedwater, Desalination, 110, 151–165.
  • Bird, R. B., Stewart, W. E., and Lightfoot, E. N. (1960). Transport Phenomena, John Wiley & Sons, New York, NY.
  • Bonnelye, V., Sanz, M. A., Durand, J.-P., Plasse, L., Gueguen, F., and Mazounie, P. (2004). Reverse osmosis on open intake seawater: Pre-treatment strategy, Desalination, 167, 191–200.
  • Cao, Z., Wiley, D. E., and Fane, A. G. (2001). CFD simulations of net-type turbulence promoters in a narrow channel, J. Membr. Sci., 185, 157–176.
  • Capobianchi, M., Irvine Jr., T. F., Tutu, N. K., and Alanson Greene, G. (1998). A new technique for measuring the Fickian diffusion coefficient in binary liquid solutions. Exp. Therm. Fluid. Sci., 18, 33–47.
  • Chatterjee, S. G., and Belfort, G. (1986). Fluid flow in an idealized spiral wound membrane module, J. Membr. Sci., 28, 191–208.
  • Da Costa, A., Fane, A., and Wiley, D.. (1994). Spacer characterization and pressure drop modelling in spacer-filled channels for ultrafiltration, J. Membr. Sci., 87, 79–98.
  • Da Costa, A. R., Fane, A. G., Fell, C. J. D., and Franken, A. C. M. (1991). Optimal channel spacer design for ultrafiltration, J. Membr. Sci., 62, 275–291.
  • Fane, A., Beatson, P., and Li, H. (2000). Membrane fouling and its control in environmental applications, Water Sci. Technol., 41, 303–308.
  • Fárková, J. (1991). The pressure drop in membrane module with spacers, J. Membr. Sci., 64, 103–111.
  • Fimbres-Weihs, G., and Wiley, D. (2010). Review of 3D CFD modeling of flow and mass transfer in narrow spacer-filled channels in membrane modules, Chem. Eng. Process. Process Intensif., 49, 759–781.
  • Fimbres-Weihs, G. A., and Wiley, D. E. (2007). Numerical study of mass transfer in three-dimensional spacer-filled narrow channels with steady flow, J. Membr. Sci., 306, 228–243.
  • Fletcher, D., Maskell, S., and Patrick, M. (1985). Heat and mass transfer computations for laminar flow in an axisymmetric sudden expansion, Comput. Fluids, 13, 207–221.
  • Fluent. (2009). ANSYS Fluent Documentation, Version 12.0/12.1
  • Fritzmann, C., et al. (2007). State-of-the-art of reverse osmosis desalination, Desalination, 216, 1–76.
  • Geraldes, V., Semião, V., and de Pinho, M. N. (2002a). The effect of the ladder-type spacers configuration in NF spiral-wound modules on the concentration boundary layers disruption, Desalination, 146, 187–194.
  • Geraldes, V., Semião, V., and de Pinho, M. N. (2002b). Flow management in nanofiltration spiral wound modules with ladder-type spacers, J. Membr. Sci., 203, 87–102.
  • Geraldes, V., Geraldes, V., Semião, V., and Norberta Pinho, M. (2003). Hydrodynamics and concentration polarization in NF/RO spiral-wound modules with ladder-type spacers, Desalination, 157, 395–402.
  • Ghidossi, R., Veyret, D., and Moulin, P. (2006). Computational fluid dynamics applied to membranes: State of the art and opportunities, Chem. Eng. Process., 45, 437–454.
  • Kang, I. S., and Chang, H. N. (1982). The effect of turbulence promoters on mass transfer—numerical analysis and flow visualization, Int. J. Heat Mass Transfer, 25, 1167–1181.
  • Karode, S. K., and Kumar, A. (2001). Flow visualization through spacer filled channels by computational fluid dynamics I.: Pressure drop and shear rate calculations for flat sheet geometry, J. Membr. Sci., 193, 69–84.
  • Koutsou, C. P., Yiantsios, S. G., and Karabelas, A. J. (2009). A numerical and experimental study of mass transfer in spacer-filled channels: effects of spacer geometrical characteristics and Schmidt number, J. Membr. Sci., 326, 234–251.
  • Lau, K. K., Abu Bakar, M. Z., Ahmad, A. L., and Murugesan, T. (2009). Feed spacer mesh angle: 3D modeling, simulation and optimization based on unsteady hydrodynamic in spiral wound membrane channel, J. Membr. Sci., 343, 16–33.
  • Li, F., Meindersma, W., de Haan, A. B., and Reith, T. (2004). Experimental validation of CFD mass transfer simulations in flat channels with non-woven net spacers, J. Membr. Sci., 232, 19–30.
  • Ma, S., and Song, L. (2006). Numerical study on permeate flux enhancement by spacers in a crossflow reverse osmosis channel, J. Membr. Sci., 284, 102–109.
  • Peters, T. (2010). Membrane technology for water treatment, Chem. Eng. Technol., 33, 1233–1240.
  • Picioreanu, C., Vrouwenvelder, J. S., and van Loosdrecht, M. C. M. (2009). Three-dimensional modeling of biofouling and fluid dynamics in feed spacer channels of membrane devices, J. Membr. Sci., 345, 340–354.
  • Ranade, V. V., and Kumar, A. (2006a). Comparison of flow structures in spacer-filled flat and annular channels, Desalination, 191, 236–244.
  • Ranade, V. V., and Kumar, A. (2006b). Fluid dynamics of spacer filled rectangular and curvilinear channels, J. Membr. Sci., 271, 1–15.
  • Saeed, A., Vuthaluru, R., Yang, Y., and Vuthaluru, H. B. (2012). Effect of feed spacer arrangement on flow dynamics through spacer filled membranes, Desalination, 285, 163–169.
  • Santos, J., Geraldes, V., Velizarov, S., and Crespo, J. (2007). Investigation of flow patterns and mass transfer in membrane module channels filled with flow-aligned spacers using computational fluid dynamics (CFD), J. Membr. Sci., 305, 103–117.
  • Santos, J. L. C., Geraldes, V., Velizarov, S., and Crespo, J. G. (2006). Modelling of flow and concentration patterns in spiral wound membrane modules with ladder-type spacers, Desalination, 200, 395–396.
  • Schock, G., and Miquel, A. (1987). Mass transfer and pressure loss in spiral wound modules, Desalination, 64, 339–352.
  • Shakaib, M., Hasani, S. M. F., and Mahmood, M. (2007). Study on the effects of spacer geometry in membrane feed channels using three-dimensional computational flow modeling, J. Membr. Sci., 297, 74–89.
  • Shakaib, M., Hasani, S. M. F., and Mahmood, M. (2009). CFD modeling for flow and mass transfer in spacer-obstructed membrane feed channels, J. Membr. Sci., 326, 270–284.
  • Song, L., and Ma, S. (2005). Numerical studies of the impact of spacer geometry on concentration polarization in spiral wound membrane modules, Ind. Eng. Chem. Res., 44, 7638–7645.
  • Versteeg, H. K., and Malalasekera, W. (2007). An Introduction to Computational Fluid Dynamics: The Finite Volume Method, Prentice Hall, Harlow, England.
  • Wilf, M., and Klinko, K. (1998). Effective new pretreatment for seawater reverse osmosis systems, Desalination, 117, 323–331.
  • Wilf, M., and Schierach, M. K. (2001). Improved performance and cost reduction of RO seawater systems using UF pretreatment, Desalination, 135, 61–68.
  • Zimmerer, C. C., and Kottke, V. (1996). Effects of spacer geometry on pressure drop, mass transfer, mixing behavior, and residence time distribution, Desalination, 104, 129–134.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.