CFD SIMULATION OF ECAE THROUGH A MULTIPLE-ANGLE DIE WITH A MOVABLE INLET WALL

References

• Abelman , S. , and Neossi Nguetchue , S. ( 2012 ). Application of the homotopy analysis method (HAM) to thin film flow of a generalized second-grade fluid on a vertically moving belt , Chem. Eng. Commun. , 199 ( 10 ), 1298 – 1319 .
   Web of Science ®Google Scholar
• Ahmed , S. , and Zueco , J. ( 2011 ). Modeling of heat and mass transfer in a rotating vertical porous channel with Hall current , Chem. Eng. Commun. , 198 ( 10 ), 1294 – 1308 .
   Web of Science ®Google Scholar
• Aour , B. , Zaïri , F. , Boulahia , R. , Naït-Abdelaziz , M. , Gloaguen , J. M. , and Lefebvre , J. M. ( 2009 ). Experimental and numerical study of ECAE deformation of polyolefins , Comput. Mater. Sci. , 45 , 646 – 652 .
   Web of Science ®Google Scholar
• Ashraf , M. , and Ahmad , S. ( 2012 ). Radiation effects on MHD axisymmetric stagnation point flow towards a heated shrinking sheet , Chem. Eng. Commun. , 199 ( 7 ), 823 – 837 .
   Web of Science ®Google Scholar
• Beloshenko , V. A. , Varyukhin , V. N. , Voznyak , A. V. , and Voznyak , Yu. V. ( 2010 ). Equal-channel multiangular extrusion of semicrystalline polymers , Polym. Eng. Sci. , 50 ( 5 ), 1000 – 1006 .
   Web of Science ®Google Scholar
• Beloshenko , V. A. , Voznyak , A. V. , and Voznyak , Yu. V. ( 2011 ). Modification of polyamide-6 structure by combined method of solid-phase extrusion , High Press. Res. , 31 , 153 – 157 .
   Web of Science ®Google Scholar
• Bhattacharyya , K. , and Layek , G. C. ( 2011 ). Slip effect on diffusion of chemically reactive species in boundary layer flow over a vertical stretching sheet with suction or blowing , Chem. Eng. Commun. , 198 ( 11 ), 1354 – 1365 .
   Web of Science ®Google Scholar
• Chijiwa , K. , Hatamura , Y. , and Hasegawa , N. ( 1981 ). Characteristics of plasticine used in the simulation of slab in rolling and continuous casting , Trans. Iron Steel Inst. Jpn. , 21 ( 3 ), 178 – 186 .
   Google Scholar
• Faraji , G. , Abrinia , K. , Mashhadi , M. , and Hamdi , M. ( 2013 ). An upper-bound analysis for frictionless TCAP process , Arch. Appl. Mech. , 83 ( 4 ), 483 – 493 .
   Web of Science ®Google Scholar
• Goodwin , J. W. , and Hughes , R. W. ( 2008 ). Rheology for Chemists: An Introduction, , 2nd ed. , RSC Publishing , Cambridge , UK .
   Google Scholar
• Hanna , O. T. , and Davis , R. A. ( 2011 ). An optimal exponential method for improved calculation of Laplace integrals and power series , Chem. Eng. Commun. , 198 ( 12 ), 1603 – 1629 .
   Web of Science ®Google Scholar
• Ikbal , A. Md. , Chakravarty , S. , Sarifuddin , and Mandal , P. K. (2012). Unsteady analysis of viscoelastic blood flow through arterial stenosis, Chem. Eng. Commun. , 199(1), 40–62.
   Web of Science ®Google Scholar
• Jamil , M. , Zafar , A. A. , Fetecau , C. , and Khan , N. A. ( 2012 ). Exact analytic solutions for the flow of a generalized Burgers fluid induced by an accelerated shear stress , Chem. Eng. Commun. , 199 ( 1 ), 17 – 39 .
   Web of Science ®Google Scholar
• Kabir , M. A. , Khan , M. M. K. , and Rasul , M. G. ( 2012 ). Reverse flow phenomena of a polyacrylamide solution in a channel with an obstacle at the entry: Influence of obstruction geometry , Chem. Eng. Commun. , 199 ( 6 ), 689 – 709 .
   Web of Science ®Google Scholar
• Laptev , A. M. , Perig , A. V. , and Vyal , O. Yu. ( 2013 ). Analysis of equal channel angular extrusion by upper bound method and rigid blocks model , Mater. Res. Advance online publication, http://dx.doi.org/10.1590/S1516-14392013005000187
   Google Scholar
• Mahmoud , M. A. A. ( 2012 ). MHD flow and heat transfer in a viscous fluid over a non-isothermal stretching surface with thermal radiation in slip-flow regime , Chem. Eng. Commun. , 199 ( 7 ), 925 – 942 .
   Web of Science ®Google Scholar
• Narooei , K. , and Karimi Taheri , A. ( 2010 ). A new model for prediction the strain field and extrusion pressure in ECAE process of circular cross section , Appl. Math. Model. , 34 ( 7 ), 1901 – 1917 .
   Web of Science ®Google Scholar
• Narooei , K. , and Karimi Taheri , A. ( 2012 ). Strain field and extrusion load in ECAE process of bi-metal circular cross section , Appl. Math. Model. , 36 ( 5 ), 2128 – 2141 .
   Web of Science ®Google Scholar
• Olejnik , L. , and Rosochowski , A. ( 2005 ). Methods of fabricating metals for nano-technology , Bull. Pol. Acad. Sci.-Technol. , 53 ( 4 ), 413 – 423 .
   Google Scholar
• Oswald , P. ( 2009 ). Rheophysics: The Deformation and Flow of Matter , Cambridge University Press , New York .
   Google Scholar
• Pantokratoras , A. ( 2011 ). Further results on hydromagnetic boundary-layer flow of a non-Newtonian power-law fluid over a continuously moving surface with suction , Chem. Eng. Commun. , 198 ( 11 ), 1405 – 1414 .
   Web of Science ®Google Scholar
• Patil , P. M. , Roy , S. , and Pop , I. ( 2012 ). Flow and heat transfer over a moving vertical plate in a parallel free stream: Role of internal heat generation or absorption , Chem. Eng. Commun. , 199 ( 5 ), 658 – 672 .
   Web of Science ®Google Scholar
• Perig , A. V. , and Laptev , A. M. ( 2013 ). Study of ECAE mechanics by upper bound rigid block model with two degrees of freedom , J. Braz. Soc. Mech. Sci. Eng. doi: 10.1007/s40430-013-0121-z .
   Google Scholar
• Perig , A. V. , Laptev , A. M. , and Kakavas , P. A. ( 2009 ). Upper bound analysis of equal channel angular extrusion: Two-parameter rigid blocks approach and numerical verification , in: Computational Plasticity X – Fundamentals and Applications: X International Conference on Computational Plasticity (COMPLAS X), Barcelona, Spain, Sept. 02–04, 2009 , ed. E. Oñate , D. R. J. Owen , and B. Suárez , International Center for Numerical Methods in Engineering (CIMNE) , Barcelona , Spain . (CD-ROM) .
   Google Scholar
• Perig , A. V. , Laptev , A. M. , Golodenko , N. N. , Erfort , Yu. A. , and Bondarenko , E. A. ( 2010 ). Equal channel angular extrusion of soft solids , Mater. Sci. Eng. A Struct. , 527 ( 16–17 ), 3769 – 3776 .
   Web of Science ®Google Scholar
• Perig , A. V. , Zhbankov , I. G. , Matveyev , I. A. , and Palamarchuk , V. A. ( 2013a ). Shape effect of angular die external wall on strain unevenness during equal channel angular extrusion , Mater. Manuf. Process. , 28 ( 8 ), 916 – 922 .
   Web of Science ®Google Scholar
• Perig , A. V. , Zhbankov , I. G. , and Palamarchuk , V. A. ( 2013b ). Effect of die radii on material waste during equal channel angular extrusion , Mater. Manuf. Process. , 28 ( 8 ), 910 – 915 .
   Web of Science ®Google Scholar
• Perig , A. V. , Tarasov , A. F. , Zhbankov , I. G. , and Romanko , S. N. ( 2013c ). Effect of 2θ-punch shape on material waste during ECAE through a 2θ-die , Mater. Manuf. Process. Advance online publication, http://dx.doi.org/10.1080/10426914.2013.832299
   Web of Science ®Google Scholar
• Pethrick , R. A. ( 2007 ). Polymer Structure Characterization: From Nano to Macro Organization , RSC Publishing , Cambridge, UK .
   Google Scholar
• Pinder , G. F. , and Gray , W. G. ( 2008 ). Essentials of Multiphase Flow and Transport in Porous Media , John Wiley & Sons , Hoboken , N.J .
   Google Scholar
• Popov , V. L. , and Slyadnikov , E. E. (1995). Plastic distortion vortices in solids under intense external action, Tech. Phys. Lett. , 21(1), 81–82.
   Google Scholar
• Rashidi , M. M. , Rahimzadeh , N. , Ferdows , M. , Jashim Uddin , Md. , and Anwar Bég , O. ( 2012 ). Group theory and differential transform analysis of mixed convective heat and mass transfer from a horizontal surface with chemical reaction effects , Chem. Eng. Commun. , 199 ( 8 ), 1012 – 1043 .
   Web of Science ®Google Scholar
• Rosochowski , A. , and Olejnik , L. ( 2002 ). Numerical and physical modelling of plastic deformation in 2-turn equal channel angular extrusion , J. Mater. Process. Technol. , 125–126 , 309 – 316 .
   Web of Science ®Google Scholar
• Rubinstein , M. , and Colby , R. ( 2003 ). Polymer Physics , Oxford University Press , New York .
   Google Scholar
• Rusin , N. M. ( 2009 ). The effect of temperature and equal-channel angular-pressing routes on the form of powders and structure in pressings , Russ. J. Non-ferr. Met. , 50 ( 5 ), 529 – 533 .
   Web of Science ®Google Scholar
• Santos , R. M. , and Kawaji , M. ( 2012 ). Developments on wetting effects in microfluidic slug flow , Chem. Eng. Commun. , 199 ( 12 ), 1626 – 1641 .
   Web of Science ®Google Scholar
• Segal , V. M. ( 2003 ). Slip line solutions, deformation mode and loading history during equal channel angular extrusion , Mater. Sci. Eng. A Struct. , 345 ( 1–2 ), 36 – 46 .
   Web of Science ®Google Scholar
• Segal , V. M. ( 2004 ). Engineering and commercialization of equal channel angular extrusion (ECAE) , Mater. Sci. Eng. A Struct. , 386 ( 1–2 ), 269 – 276 .
   Web of Science ®Google Scholar
• Segal , V. M. ( 2010 ). Mechanics of continuous ECAE , J. Mater. Process. Technol. , 210 ( 3 ), 542 – 549 .
   Web of Science ®Google Scholar
• Shateyi , S. , and Motsa , S. S. ( 2011 ). Boundary layer flow and double diffusion over an unsteady stretching surface with Hall effect , Chem. Eng. Commun. , 198 ( 12 ), 1545 – 1565 .
   Web of Science ®Google Scholar
• Sofuoglu , H. , and Rasty , J. ( 2000 ). Flow behavior of plasticine used in physical modeling of metal forming processes , Tribol. Int. , 33 ( 8 ), 523 – 529 .
   Web of Science ®Google Scholar
• Spuskanyuk , V. Z. , Spuskanyuk , A. V. , and Varyukhin , V. N. ( 2008 ). Development of the equal-channel angular hydroextrusion , J. Mater. Process. Technol. , 203 ( 1–3 ), 305 – 309 .
   Web of Science ®Google Scholar
• Strobl , G. ( 2007 ). The Physics of Polymers: Concepts for Understanding Their Structures and Behavior, , 3rd ed. , Springer-Verlag , Berlin .
   Google Scholar
• Warner , M. , and Terentjev , E. M. ( 2009 ). Liquid Crystal Elastomers , Oxford University Press , New York .
   Google Scholar
• Xia , Z. , Hartwig , T. , and Sue , H.-J. ( 2005 ). Mechanical behavior of bulk poly(ethylene terephthalate) subjected to simple shear , J. Macromol. Sci. B , 43 , 385 – 403 .
   Web of Science ®Google Scholar
• Yoon , S. C. , Nagasekhar , A. V. , Yoo , J. H. , Aal , M. I. , Vaseghi , M. , and Kim , H. S. ( 2010 ). Deformation characteristics evaluation of modified equal channel angular pressing processes , Mater. Trans. , 51 ( 1 ), 46 – 50 .
   Web of Science ®Google Scholar
• Color versions of one or more of the figures in the article can be found online at www.tandfonline.com/gcec.
   Google Scholar