274
Views
7
CrossRef citations to date
0
Altmetric
Note

Forced Convective Drying of Wastewater Sludge with the Presentation of Exergy Analysis of the Dryer

, , &

References

  • Akyol, U., A. E. Akan, and A. Durak. (2015). Simulation and thermodynamic analysis of a hot-air textile drying process, J. Text. I., 106, 260–274.
  • Arlabosse, P., and T. Chitu. (2007). Identification of the limiting mechanism in contact drying of agitated sewage sludge, Dry. Technol., 25, 557–567.
  • Aviara, N. A., L. N. Onuoha, O. E. Falola, and J. C. Igbeka. (2014). Exergy and energy analyses of native cassava starch in a tray dryer, Energy, 73, 809–817.
  • Bennamoun, L., L. Fraikin, and A. Léonard. (2014). Modeling and simulation of heat and amass transfer during convective drying of wastewater sludge with introduction of shrinkage phenomena, Dry. Technol., 32, 13–22.
  • Bennamoun, L., P. Arlabosse, and A. Léonard. (2013a). Review on fundamental aspect of application of drying process to wastewater sludge, Renew. Sust. Energ Rev., 28, 29–43.
  • Bennamoun, L., M. Crine, and A. Léoanard. (2013b). Convective drying of wastewater sludge: Introduction of shrinkage effect in mathematical modelling, Dry. Technol., 31, 643–654.
  • Bennamoun, L., L. Fraikin, T. Salmon, M. Crine, and A. Léonard. (2013c). Modeling of wastewater sludge drying with determination of moisture diffusivity, J. Residuals Sci. Tech., 10, 165–170.
  • Bennamoun, L. (2012a). Solar drying of wastewater sludge: A review, Renew. Sust. Energ. Rev., 16, 1061–1073.
  • Bennamoun, L. (2012b). An overview on application of energy and energy for determination of solar drying efficiency, Int. J. Energ. Eng., 2, 184–194.
  • Bennamoun, L., and A. Belhamri. (2003). Design and simulation of a solar dryer for agriculture products, J. Food Eng., 59, 259–266.
  • Chowdhury, M. M. I., B. K. Bala, and M. A. Haque. (2011). Energy and exergy analysis of the solar drying of jackfruit leather, Biosystems Eng., 110, 222–229.
  • Deng, W. Y., J. H. Yan, X. D. Li, F. Wang, S. Y. Lu, Y. Chi, and K. F. Cen. (2009a). Measurement and simulation of the contact drying of sewage sludge in a Nara-type paddle dryer, Chem. Eng. Sci., 64, 5117–5124.
  • Deng, W. Y., J. H. Yan, X. D. Li, F. Wang, S. Y. Lu, Y. Chi, and K. F. Cen. (2009b). Experimental and theoretical study of agitated contact drying of sewage sludge under partial vacuum conditions. Dry. Technol., 27, 787–796.
  • Domingez, A., J. A. Menédez, M. Inguanzo, and J. J. Pis. (2004). Sewage sludge drying using microwave energy and characterization by IRTF, Afinidad, 61, 280–285.
  • Fraikin, L., T. Salmon, B. Herbreteau, J. P. Levasseur, F. Nicol, M. Crine, and A. Léonard. (2011). Impact of storage duration on the gaseous emissions during convective drying of urban residual sludges, Chem. Eng. Tech., 34, 1172–1176.
  • Fang, L. S. Li, T. Zhai, X. Zhao, and H. Sun. (2013). A comparative study on the drying process of sewage sludge: Microwave and air-blast, WIT Trans. Built Envi., 140, 575–581.
  • Ferasse, J. H., P. Arlabosse, and D. Lecompte. (2002). Heat, momentum, and mass transfer measurement in indirect agitated sludge dryer, Dry. Technol., 20, 749–769.
  • Font, R., Gomez-Rico, M. F., and Fullana, A. (2011). Skin effect in the heat and mass transfer model for sewage sludge drying, Sep. Purif. Technol., 77, 146–161.
  • Léonard, A., S. Blacher, P. Marchot, and M. Crine. (2002). Use of X-ray microtomography to follow the convective heat drying of wastewater sludges, Dry. Technol., 20, 1053–1069.
  • Léonard, A., E. Meneses, E. Le Trong, T. Salmon, P. Marchot, D. Toye, and M. Crine. (2008). Influence of back mixing on the convective drying of residual sludges in a fixed bed, Water Res., 42, 2671–2677.
  • Léonard, A., S. Blacher, P. Marchot, J. P. Pirard, and M. Crine. (2005). Convective drying of wastewater sludges: influence of air temperature, superficial velocity, and humidity on the drying kinetics. Dry. Technol., 23, 1667–1679.
  • Léonard, A., P. Vandevenne, T. Salmon, P. Marchot, and M. Crine. (2004). Wastewater sludge convective drying: Influence of sludge origin, Envi. Technol., 25, 1051–1057.
  • Léonard A., S. Blacher, P. Marchot, J. P. Pirard, and M. Crine. (2003). Image analysis of X-ray microtomograms of soft materials during convective drying, J. Microsc., 212, 197–204.
  • Mathioudakis, V. L., A. G. Kapagiannidis, E. Athanasoulia, A. D. Paltzoglou, P. Melidis, and A. Aivasidis. (2013). Sewage Sludge Solar Drying: Experiences from the First Pilot-Scale Application in Greece, Dry. Technol., 31, 519–526.
  • Prommas R., P. Rattanadecho, and W. Jindarat. (2012). Energy and exergy in drying process of non-hygroscopic porous packed bed using a combined multi-feed microwave-convective air and continuous belt, Int. Commun. Heat Mass Transfer, 39, 242–250.
  • Prommas R., P. Keangin, and P. Rattanadecho. (2010a). Energy and exergy analyses in convective drying process of multi-layered porous packed bed, Int. Commun. Heat Mass Transfer, 37, 1106–1114.
  • Prommas R., P. Rattanadecho, and D. Cholaseuk. (2010b). Energy and exergy analyses in drying of porous media using hot air, Int. Commun. Heat Mass Transfer, 37, 372–378.
  • Salihoglu, N. K., V. Pinarli, and G. Salihoglu. (2007). Solar drying in sludge management in Turkey, Renew. Energ., 32, 1661–1675.
  • Slim, R., A. Zoughaib, and D. Clodic. (2008). Modeling of a solar and heat pump sludge drying system, Int. J. Refrig., 31, 1156–1168.
  • Tao, T., X. F. Peng, and D. J. Lee. (2006). Skin layer on thermally dried sludge cake, Dry. Technol., 24, 1047–1052.
  • Tao, T., X. F. Peng, and D. J. Lee. (2005). Thermal drying of wastewater sludge: change in drying area owing to volume shrinkage and crack development, Dry. Technol., 23, 669–682.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.