References
- Abulencia, J. P., and Theodore, L. (2010). Flow Mechanisms. Fluid Flow for the Practicing Chemical Engineer, John Wiley & Sons, Inc., Hoboken, NJ, USA.
- Aljuwayhel, N. F., and Nellis, G. F. (2005). Parametric and internal study of the vortex tube using a CFD model, Int. J. Refrig., 28(3), 442–450.
- Avcı, M. (2013). The effects of nozzle aspect ratio and nozzle number on the performance of the Ranque–Hilsch vortex tube, Appl. Therm. Eng., 50(1), 302–308.
- Behera, U., Paul, P. J., Kasthurirengan, S., Karunanithi, R., Ram, S. N., Dinesh, K., and Jacob, S. (2005). Star CD CFD analysis and experimental investigations towards optimizing the parameters of Ranque-Hilsch vortex tube, Int. J. Heat Mass Transfer, 48(10), 1961–1973.
- Baghdad, M., Ouadha, A., Imine, O., and Addad, Y. (2011). Numerical study of energy separation in a vortex tube with different RANS models, Int. J. Therm Sci., 50, 2377–2385.
- Bovand, M., Valipour, M. S., Eiamsa-ard, S., and Tamayol, A. (2014). Numerical analysis for curved vortex tube optimization, Int. Commun. Heat Mass Transfer, 50, 98–107.
- Choudhury, D., Kim, S. E., and Flannery, W. S. (1993). Calculation of turbulent separated flows using a renormalization group based k-ϵ turbulence model, vol. 149, American Society of Mechanical Engineers, Fluids Engineering Division (publication) FED, 177–187.
- Cokljat, D., and Keith Walters, D. (2008). A three-equation eddy-viscosity model for Reynolds-averaged Navier-Stokes simulations of transitional flows, J. Fluids Eng. 130, 121401-1–121401-14.
- Dutta, T., Sinhamahapatra, K. P., and Bandyopadhyay, S. S. (2011). Numerical investigation of gas species and energy separation in the Ranque-Hilsch vortex tube using real gas model, Int. J. Refrig. 34, 2118–2128.
- Eiamsa-ard, S., and Promvonge, P. (2007). Numerical investigation of the thermal separation in a Ranque–Hilsch vortex tube, Int. J. Heat Mass Transfer, 50, 821–832.
- Hamdan, M. O., Alsayyed, B., and Elnajjar, E. (2013). Nozzle parameters affecting vortex tube energy separation performance, Heat Mass Transfer, 49(4), 533–541.
- Hossain, M. A., and Hossain, S. (2013). Effect of different turbulence model on numeric simulation of engine cooling. In ASME 2013, Int. Mechanical Engineering Congress and Exposition.
- Khait, A., Noskov, A., Alekhin, V., and Antipin, A. (2013). Numerical simulation and visualization of air flow in Ranque–Hilsch vortex tube. Proceedings of the 13th Int. Conference on Construction Applications of Virtual Reality. London, UK.
- Launder, B. E., and Spalding, D. B. (1974). The numerical computation of turbulent flows, Comput. Methods Appl. Mech. Eng., 3, 269–289.
- Li, M., Yu, C., and Shang, S. (2013). A numerical and experimental study on the effect of the orifice angle of vortex tube in vortex spinning machine, J. Text. Inst., 104(12), 1303–1311.
- Liew, R., Zeegers, J. C. H., Kuerten, J. G. M., and Michałek, W. R. (2013). 3D velocimetry and droplet sizing in the Ranque–Hilsch vortex tube, Exp Fluids, 54, 1416.
- Maurya, R. S., and Bhavsar, K. Y. (2013). Energy and flow separation in the vortex tube, Int. J. Theor. Appl. Res. Mech. Eng., 2(3), 25–32.
- Menter, F. R. (1994). Two-equation eddy-viscosity turbulence models for engineering applications, AIAA J. 32, 1598–1605.
- Patel, R. B., Bartaria, D. V., and Shaikh, T. M. (2012). A review on experimental & numerical investigation of Ranque-Hilsch vortex tube, Int. J. Eng. Res. Appl., 2(4), 1359–1363.
- Pouraria, H., and Park, W. G. (2014). Numerical investigation on cooling performance of Ranque-Hilsch vortex tube, Therm. Sci., 18(4), 1173–1189.
- Pouraria, H., and Zangooee, M. R. (2012). Numerical investigation of vortex tube refrigerator with a divergent Hot Tube, Energy Procedia, 14, 1554–1559.
- Pourmahmoud, N., Hassanzadeh, A., and Moutaby, O. (2012). Numerical analysis of the effect of helical nozzles gap on the cooling capacity of Ranque-Hilsch vortex tube, Int. J. Refrig., 35, 1473–1483.
- Rattanongphisat, W., Riffat, S. B., and Gan, G. (2008). Thermal separation flow characteristic in a vortex tube: CFD model, Int. J. Low Carbon Technol., 3(4), 282–295.
- Secchiaroli, A., Ricci, R., Montelpare, S., and D'Alessandro, V. (2009). Numerical simulation of turbulent flow in a Ranque–Hilsch vortex tube 2009, Int. J. Heat Mass Transfer, 52, 5496–5511.
- Shamsoddini, R., and Hossein Nezhad, A. (2010). Numerical analysis of the effects of nozzles number on the flow and power of cooling of a vortex tube, Int. J. Refrig., 33, 774–782.
- Shij, T. H., Liou, W. W., Shabbir, A., Yang, Z., and Shu, J. (1995). New k-ϵ eddy viscosity model for high Reynolds number turbulent flows, Comput. Fluids, 24, 227–238.
- Skye, H. M., Nellis, G. F., and Klein, S. A. (2006). Comparison of CFD analysis to empirical data in a commercial vortex tube, Int. J. Refrig., 29, 71–80.
- Soave, G. (1972). Equilibrium constants from a modified Redlich-Kwong equation of state, Chem. Eng. Sci., 27, 1197–1203.
- Spalart, P., and Allmaras, S. (1992). A one-equation turbulence model for aerodynamic flows, American Institute of Aeronautics and Astronautics, Technical report AIAA-92- 0439.
- Wilcox, D. C. (1998a). Reassessment of the scale-determining equation for advanced turbulence models, AIAA J., 26, 1299–1310.
- Wilcox, D. C. (1998b). Multiscale model for turbulent flows, AIAA J., 26, 1311–1320.