338
Views
7
CrossRef citations to date
0
Altmetric
Original Articles

Experimental investigation of maldistribution in vertical plate falling film tower

, , ORCID Icon &

References

  • Alix, P., and Raynal, L. (2008). Liquid distribution and liquid hold-up in modern high capacity packings, Chem. Eng. Res. Des., 86(6), 585–591.
  • Baker, T., Chilton, T. H., and Vernon, H. C. (1935). The course of liquor flow in packed towers, Trans. AIChE, 31, 296–313.
  • Cheng, W. L., Houda, K., Chen, Z. S., Akisawa, A., Hu, P., and Kashiwagi, T. (2004). Heat transfer enhancement by additive in vertical falling film absorption of H2O/LiBr, Appl. Therm. Eng., 24, 281–298.
  • Coustel, J., and Journet, G. (2009). Falling-film evaporator performance results from two Reunion Island factories, Sugar Industry / Zuckerindustrie, 134(4), 225–229.
  • Fitz Jr., C. W., King, D. W., and Kunesh, J. G. (1999). Controlled liquid maldistribution studies on structured packing, Chem. Eng. Res. Des., 77(6), 482–486.
  • Fourati, M., Roig, V., and Raynal, L. (2012). Experimental study of liquid spreading in structured packings, Chem. Eng. Sci., 80, 1–15.
  • Hoek, P. J., Wesselingh, J. A., and Zuiderweg, F. J. (1986). Small scale and large scale liquid maldistribution in packed columns, Chem. Eng. Res. Des., 64, 431–449.
  • Jiao, A., Zhang, R., and Jeong, S. (2003). Experimental investigation of header configuration on flow maldistribution in plate-fin heat exchanger, Appl. Therm. Eng., 23, 1235–1246.
  • Kang, B. H., Kim, K. H., and Lee, D. Y. (2007). Fluid flow and heat transfer on a falling liquid film with surfactant from a heated vertical surface, J. Mech. Sci. Technol., 21, 1807–1812.
  • Kim, J. K., Park, C. W., and Kang, Y. T. (2003). The effect of micro-scale surface treatment on heat and mass transfer performance for a falling film H2O/LiBr absorber, Int. J. Refrig., 26, 575–585.
  • Koroglu, B., Lee, K. S., and Park, C. (2013). Nano/micro-scale surface modifications using copper oxidation for enhancement of surface wetting and falling-film heat transfer, Int. J. Heat Mass Transfer, 62, 794–804.
  • Kumar, R., Dhar, P. L., and Jain, S. (2011). Development of new wire mesh packing for improving the performance of zero carry over spray tower, Energy, 36(2), 1362–1374.
  • Kumar, R., Dhar, P. L., Jain, S., and Asati, A. K. (2009). Multi absorber stand alone liquid desiccant air-conditioning systems for higher performance, Sol. Energy, 83, 761–772.
  • Lalot, S., Florent, P., Lang, S. K., and Bergles, A. E. (1999). Flow maldistribution in heat exchangers, Appl. Therm. Eng., 19, 847–863.
  • Llamas, J. D., Perat, C., Lesage, F., Weber, M., D’Ortona, U., and Wild, G. (2008). Wire mesh tomography applied to trickle beds: A new way to study liquid maldistribution, Chem. Eng. Process.: Process Intensif., 47(9–10), 1765–1770.
  • Olujic, Z., Baak, R. V., and Haaring, J. (2006). Liquid distribution behaviour of conventional and high capacity structured packings, American Institute of Chemical Engineers Symposium, series no. 152, 252–266.
  • Patil, D., Kumar, R., and Xiao, F. (2016). Wetting enhancement of polypropylene plate for falling film tower application, Chem. Eng. Process.: Process Intensif., 108, 1–9.
  • Porter, K. E., Barnett, V. D., and Templeman, J. J. (1968). Liquid flow in packed columns Part II: The spread of liquid over random packings, Trans. Instn Chern. Engrs., 46, T74–T85.
  • Scott, A. H. (1935). Liquid distribution in packed towers, Trans. Inst. Chem. Engrs., 13, 211–217.
  • Spigel, L. (2006). A new method to assess liquid distributor quality, Chem. Eng. Process.: Process Intensif., 45(11), 1011–1017.
  • Wanchoo, R. K., Kaur, N., Bansal, A., and Thakur, A. (2007). RTD in trickle bed reactors: experimental study, Chem. Eng. Comm., 194, 1503–1515.
  • Wang, L., Wang, H., Li, B., Wang, Y., and Wang, S. (2014). Novel design of liquid distributors for VMD performance improvement based on cross-flow membrane module, Desalination, 336, 80–86.
  • Wang, L., Xiao, F., Zhang, X., and Kumar, R. (2016). An experimental study on the dehumidification performance of a counter flow liquid desiccant dehumidifier, Int. J. Refrig., 70, 289–301.
  • Wang, S., Li, Y., Wen, J., and Ma, Y. (2010). Experimental investigation of header configuration on two-phase flow distribution in plate-fin heat exchanger, Int. Commun. Heat Mass, 37, 116–120.
  • Wang, Y. F., Mao, Z. S., and Chen, J. (1998). A new instrumentation for measuring the small scale maldistribution of liquid flow in trickle beds, Chem. Eng. Comm., 163, 233–244.
  • Wen, J., and Li, Y. (2004). Study of flow distribution and its improvement on the header of plate-fin heat exchanger, Cryogenics, 44, 823–831.
  • Xu, M., Huang, H., Zhan, X., Liu, H., Ji, S., and Li, C. (2009). Pressure drop and liquid hold-up in multiphase monolithic reactor with different distributors, Catal. Today, 147S, 132–137.
  • Yin, F., Wang, Z., Afacan, A., Nandakumar, K., and Chuang, K. T. (2000). Experimental studies of liquid flow maldistribution in a random packed column, Can. J. Chem. Eng., 78(3), 449–457.
  • Zhang, Z., Mehendale, S., Tian, J. J., and Li, Y. Z. (2015). Experimental investigation of distributor configuration on flow maldistribution in plate-fin heat exchangers, App. Therm. Eng., 85, 111–123.
  • Zhang, Z., Mehendale, S., Tian, J. J., and Li, Y. Z. (2017). Experimental investigation of two-phase flow distribution in plate-fin heat exchangers, Chem. Eng. Res. Des., 120, 34–46.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.