References
- Alves, S. S., Maia, C. I., Vasconcelos, J. M. T., and Serralheiro, A. J. (2002). Bubble size in aerated stirred tanks, Chem. Eng. J., 89, 109–117.
- Babinsky, E., and Sojka, P. (2002). Modeling drop size distributions, Prog. Energy Combust. Sci., 28, 303–329.
- Barigou, M. (1987). Bubble size, gas holdup and interfacial area distributions in mechanically agitated gas–liquid reactors, Ph.D. thesis, The University of Bath, United Kingdom.
- Barigou, M., and Greaves, M. (1992). Bubble-size distributions in a mechanically agitated gas–liquid contactor, Chem. Eng. Sci., 47, 2009–2025.
- Brauer, H. (1985). Stirred vessel reactors, in H. Brauer ed., Biotechnology, vol. 2, Fundamentals of Biochemical Engineering, VCH, Weinheim.
- Busciglio, A., Grisafi, F., Scargiali, F., and Brucato, A. (2010). On the measurement of bubble size distribution in gas–liquid contactors via light sheet and image analysis, Chem. Eng. Sci., 65, 2558–2568.
- Dunbar, C., and Hickey, A. (2000). Evaluation of probability density functions to approximate particle size distributions of representative pharmaceutical aerosols, J. Aerosol Sci., 31, 813–831.
- González-Tello, P., Camacho, F., Vicaria, J., and González, P. (2008). A modified Nukiyama–Tanasawa distribution function and a Rosin–Rammler model for the particle-size-distribution analysis, Powder Technol., 186, 278–281.
- Hughmark, G. A. (1980). Power requirements and interfacial area in gas–liquid turbine agitated systems, Ind. Eng. Chem. Process Des. Dev., 19, 641–646.
- Kálal, Z., Jahoda, M., and Fort, I. (2014). Modelling of the bubble size distribution in an aerated stirred tank: Theoretical and numerical comparison of different breakup models, Chem. Process Eng., 35, 331–348.
- Macías-García, A., Cuerda-Correa, E., and Díaz-Díez, M. (2004). Application of the Rosin–Rammler and Gates–Gaudin–Schuhmann models to the particle size distribution analysis of agglomerated cork, Mater. Charact., 52, 159–164.
- Martin, T. (1995). Gas dispersion with radial and hydrofoil impellers in fluids with different coalescence characteristics, Ph.D. thesis, Birmingham University, United Kingdom.
- Montante, G., Horn, D., and Paglianti, A. (2008). Gas-liquid flow and bubble size distribution in stirred tanks, Chem. Eng. Sci., 63, 2107–2118.
- Paloposki, T. (1994). Drop size distributions in liquid sprays, Acta Polytech. Scand. Mech. Eng. Ser., 114, 1–209.
- Petitti, M., Nasuti, A., Marchisio, D., Vanni, M., Baldi, G., Mancini, N., and Podenzani, F. (2010). Bubble size distribution modeling in stirred gas–liquid reactors with QMOM augmented by a new correction algorithm, AIChE J., 56, 36–53.
- Sajjadi, B., Raman, A., Ibrahim, S., and Shah, R. (2012). Review on gas–liquid mixing analysis in multiscale stirred vessel using CDF, Rev. Chem. Eng., 28, 171–189.
- Samaras, K., Kostoglou, M., Karapantsios, T. D., and Mavros, P. (2014). Effect of adding glycerol and Tween 80 on gas holdup and bubble size distribution in an aerated stirred tank, Colloids Surf. A, 441, 815–824.
- Snedecor, G. W., and Cochran, W. G. (1989). Statistical Methods, 8th Ed., Iowa State University Press. Iowa City, USA.
- Spiess, A.-N., and Neumeyer, N. (2010). An evaluation of R2 as an inadequate measure for nonlinear models in pharmacological and biochemical research: A Monte Carlo approach, BMC Pharmacol., 10, 1–11.
- Zhang, Z., Dai, G., and Chen, M. (1989). Study on bubble size distribution in an aerated stirred vessel, Huagong Xuebao (Chin. Ed.), 40, 183–189.