References
- Akbari V, Borhani TNG, Godini HR, Hamid MKA. 2014. Model-based analysis of the impact of the distributor on the hydrodynamic performance of industrial polydisperse gas phase fluidized bed polymerization reactors. Powder Technol. 267:398–411. doi:10.1016/j.powtec.2014.07.042.
- Akbari V, Nejad Ghaffar Borhani T, Aramesh R, Hamid MKA, Shamiri A, Hussain MA. 2015. Evaluation of hydrodynamic behavior of the perforated gas distributor of industrial gas phase polymerization reactor using CFD-PBM coupled model. Comp Chem Eng. 82:344–361. doi:10.1016/j.compchemeng.2015.07.001.
- ANSYS FLUENT Theory Guide 2011. http://www.springerlink.com/content/u13552/#section=800779&%2338;page=21&%2338;locus=97.
- Askaripour H, Molaei Dehkordi A. 2015. Simulation of 3D freely bubbling gas-solid fluidized beds using various drag models: TFM approach. Chem Eng Res Des. 100:377–390.
- Ghaly A, Ergudenler A, Ramakrishnan V. 2015. Effect of distributor plate configuration on pressure drop in a bubbling fluidized bed reactor. Adv Res. 3(3):251–268. doi:10.9734/AIR/2015/8240.
- Gidaspow D. 1994. Multiphase flow and fluidization: continuum and kinetic theory descriptions. New York (NY): Academic Press.
- Goldschmidt MJV, Beetstra R, Kuipers JAM. 2004. Hydrodynamic modelling of dense gas-fluidised beds: comparison and validation of 3D discrete particle and continuum models. Powder Technol. 142(1):23–47. doi:10.1016/j.powtec.2004.02.020.
- Hamzehei M, Rahimzadeh H, Ahmadi G. 2010. Computational and experimental study of heat transfer and hydrodynamics in a 2D gas-solid fluidized bed reactor. Ind Eng Chem Res. 49(11):5110–5121.
- Kunii D, Levenspiel O. 1991. Fluidization engineering. 2nd ed. Boston (MA): Butterworth-Heinemann.
- Ngo SI, Lim YI, Song BH, Lee UD, Lee JW, Song JH. 2015. Effects of fluidization velocity on solid stack volume in a bubbling fluidized-bed with nozzle-type distributor. Powder Technol. 275:188–198. doi:10.1016/j.powtec.2015.02.017.
- Sahoo P, Sahoo A. 2015. A comparative study on effect of different parameters of CFD modeling for gas – solid fluidized bed. UPST. 33(3):273–289. doi:10.1080/02726351.2014.952393.
- Sarker R, Rahman M, Love N, Choudhuri A. 2012. Effect of bed height, bed diameter and particle shape on minimum fluidization in a gas-solid fluidized bed. Paper presented at: 50th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition; 2012 Jan 9–12; Nashville, TN.
- Shukrie A, Anuar S, Oumer AN. 2016. Air distributor designs for fluidized bed combustors: a review. Technol Appl Sci Res. 6(3):1029–1034.
- Sobrino C, Ellis N, de Vega M. 2009. Distributor effects near the bottom region of turbulent fluidized beds. Powder Technol. 189(1):25–33. doi:10.1016/j.powtec.2008.05.012.
- Taghipour F, Ellis N, Wong C. 2005. Experimental and computational study of gas-solid fluidized bed hydrodynamics. Chem Eng Sci. 60(24):6857–6867. doi:10.1016/j.powtec.2008.05.012.
- Werther J. 1987. D. Geldart (Ed.): gas fluidization technology, John Wiley & Sons. Chichester, New York, Brisbane, Toronto, Singapore 1986. 468 Seiten, Preis: £42.50. Berichte Der Bunsengesellschaft Für Physikalische Chemie. 91(6):678–679. doi:10.1002/bbpc.19870910624.