References
- Afrand M, Pordanjani AH, Aghakhani S, Oztop HF, Abu-Hamdeh N. 2020. Free convection and entropy generation of a nanofluid in a tilted triangular cavity exposed to a magnetic field with sinusoidal wall temperature distribution considering radiation effects. Int Commun Heat Mass Transfer. 112:104507. doi:https://doi.org/10.1016/j.icheatmasstransfer.2020.104507
- Aghakhani S, Ghasemi B, Hajatzadeh Pordanjani A, Wongwises S, Afrand M. 2019. Effect of replacing nanofluid instead of water on heat transfer in a channel with extended surfaces under a magnetic field. HFF. 29(4):1249–1271. doi:https://doi.org/10.1108/HFF-06-2018-0277
- Ahmed HE, Salman BH, Kherbeet AS, Ahmed MI. 2018. Optimization of thermal design of heat sinks: A review. Int J Heat Mass Transf. 118:129–153. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2017.10.099
- Alfaryjat AA, Mohammed HA, Adam NM, Stanciu D, Dobrovicescu A. 2018. Numerical investigation of heat transfer enhancement using various nanofluids in hexagonal microchannel heat sink. Therm Sci Eng Prog. 5:252–262. doi:https://doi.org/10.1016/j.tsep.2017.12.003
- Alizadeh R, Gomari SR, Alizadeh A, Karimi N, Li LKB. 2021. Combined heat and mass transfer and thermodynamic irreversibilities in the stagnation-point flow of Casson rheological fluid over a cylinder with catalytic reactions and inside a porous medium under local thermal nonequilibrium. Comput Math Appl. 81:786–810. doi:https://doi.org/10.1016/j.camwa.2019.10.021
- Alizadeh R, Karimi N, Arjmandzadeh R, Mehdizadeh A. 2019a. Mixed convection and thermodynamic irreversibilities in MHD nanofluid stagnation-point flows over a cylinder embedded in porous media. J Therm Anal Calorim. 135(1):489–506. doi:https://doi.org/10.1007/s10973-018-7071-8
- Alizadeh R, Karimi N, Mehdizadeh A, Nourbakhsh A. 2019b. Analysis of transport from cylindrical surfaces subject to catalytic reactions and non-uniform impinging flows in porous media. J Therm Anal Calorim. 138(1):659–678. doi:https://doi.org/10.1007/s10973-019-08120-z
- Alizadeh R, Karimi N, & Nourbakhsh A 2020. Effects of radiation and magnetic field on mixed convection stagnation-point flow over a cylinder in a porous medium under local thermal non-equilibrium. J Therm Anal Calorim 140, 1371–1391.
- Ambreen T, Kim M-H. 2020. Influence of particle size on the effective thermal conductivity of nanofluids: a critical review. Appl Energy. 264:114684. doi:https://doi.org/10.1016/j.apenergy.2020.114684
- Atyabi SA, Afshari E, Wongwises S, Yan W-M, Hadjadj A, Shadloo MSJE. 2019. Effects of assembly pressure on PEM fuel cell performance by taking into accounts electrical and thermal contact resistances. Energy, 179:490–501.
- Bahiraei M, Heshmatian S. 2017. Application of a novel biological nanofluid in a liquid block heat sink for cooling of an electronic processor: thermal performance and irreversibility considerations. Energy Convers Manage. 149:155–167. doi:https://doi.org/10.1016/j.enconman.2017.07.020
- Bahiraei M, Heshmatian S. 2018. Electronics cooling with nanofluids: a critical review. Energy Convers Manage. 172:438–456. doi:https://doi.org/10.1016/j.enconman.2018.07.047
- Bahiraei M, Heshmatian S. 2018. Thermal performance and second law characteristics of two new microchannel heat sinks operated with hybrid nanofluid containing graphene–silver nanoparticles. Energy Convers Manage. 168:357–370. doi:https://doi.org/10.1016/j.enconman.2018.05.020
- Bahiraei M, Heshmatian S, Keshavarzi M. 2019. A decision-making based method to optimize energy efficiency of ecofriendly nanofluid flow inside a new heat sink enhanced with flow distributor. Powder Technol. 342:85–98. doi:https://doi.org/10.1016/j.powtec.2018.10.007
- Bahiraei M, Jamshidmofid M, Dahari M. 2020. Second law analysis of hybrid nanofluid flow in a microchannel heat sink integrated with ribs and secondary channels for utilization in miniature thermal devices. Chem Eng Process Process Intensif. 153:107963. doi:https://doi.org/10.1016/j.cep.2020.107963
- Chen H, Moria H, Ahmed SY, Nisar KS, Mohamed AM, Heidarshenas B, Arsalanloo A, Youshanlouei MM. 2021. Thermal/exergy and economic efficiency analysis of circumferentially corrugated helical tube with constant wall temperature. Case Stud Therm Eng. 23:100803. doi:https://doi.org/10.1016/j.csite.2020.100803
- Cheraghian G. 2016. Improved heavy oil recovery by nanofluid surfactant flooding - an experimental study. Conference Proceedings, 78th EAGE Conference and Exhibition 2016, May 2016, Volume 2016, pp. 1–5.
- Chingulpitak S, Wongwises S. 2015. A review of the effect of flow directions and behaviors on the thermal performance of conventional heat sinks. Int J Heat Mass Transf. 81:10–18. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2014.09.081
- Chu W-X, Lin Y-C, Chen C-Y, Wang C-C. 2019. Experimental and numerical study on the performance of passive heat sink having alternating layout. Int J Heat Mass Transf. 135:822–836. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2019.02.034
- Deng D, Chen L, Chen X, Pi G. 2019. Heat transfer and pressure drop of a periodic expanded-constrained microchannels heat sink. Int J Heat Mass Transf. 140:678–690. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2019.06.006
- Elliott A, Torabi M, Karimi N. 2017. Thermodynamics analyses of porous microchannels with asymmetric thick walls and exothermicity: an entropic model of microreactors. Journal of Thermal Science and Engineering Applications, 9(4):1948–5085. doi:https://doi.org/10.1115/1.4036802
- Elliott A, Torabi M, Karimi N, Cunningham S. 2016. On the effects of internal heat sources upon forced convection in porous channels with asymmetric thick walls. Int Commun Heat Mass Transfer. 73:100–110. doi:https://doi.org/10.1016/j.icheatmasstransfer.2016.02.016
- Ghani IA, Sidik NAC, Kamaruzaman N. 2017. Hydrothermal performance of microchannel heat sink: the effect of channel design. Int J Heat Mass Transf. 107:21–44. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2016.11.031
- Gomari SR, Alizadeh R, Alizadeh A, Karimi N. 2019. Generation of entropy during forced convection of heat in nanofluid stagnation-point flows over a cylinder embedded in porous media. Numer Heat Transfer Part A Appl. 75(10):647–673. doi:https://doi.org/10.1080/10407782.2019.1608774
- Hajatzadeh Pordanjani A, Aghakhani S, Afrand M, Mahmoudi B, Mahian O, Wongwises S. 2019. An updated review on application of nanofluids in heat exchangers for saving energy. Energy Convers Manage. 198:111886. doi:https://doi.org/10.1016/j.enconman.2019.111886
- Ho CJ, Hsu S-T, Jang J-H, Hosseini SF, Yan W-M. 2020. Experimental study on thermal performance of water-based nano-PCM emulsion flow in multichannel heat sinks with parallel and divergent rectangular mini-channels. Int J Heat Mass Transf. 146:118861. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2019.118861
- Hunt G, Karimi N, Yadollahi B, Torabi M. 2019. The effects of exothermic catalytic reactions upon combined transport of heat and mass in porous microreactors. Int J Heat Mass Transf. 134:1227–1249. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2019.02.015
- Ibrahim M, Saeed T, Chu Y-M, Ali HM, Cheraghian G, Kalbasi R. 2021. Comprehensive study concerned graphene nano-sheets dispersed in ethylene glycol: experimental study and theoretical prediction of thermal conductivity. Powder Technol. 386:51–59. doi:https://doi.org/10.1016/j.powtec.2021.03.028
- Irandoost Shahrestani M, Maleki A, Safdari Shadloo M, Tlili I. 2020. Numerical investigation of forced convective heat transfer and performance evaluation criterion of Al2O3/water nanofluid flow inside an axisymmetric microchannel. Symmetry 2020, 12, 120. doi:https://doi.org/10.3390/sym12010120
- Jilte R, Ahmadi MH, Kumar R, Kalamkar V, Mosavi A. 2020. Cooling performance of a novel circulatory flow concentric multi-channel heat sink with nanofluids. Nanomaterials 2020, 10, 647. doi:https://doi.org/10.3390/nano10040647
- Karamoozian A, Tan C, Wang L. 2018. Lattice brake disc instability analysis using transient complex eigenvalue method in terms of excitation applied to the Pad. SAE Technical Paper 2018-01-0091, 2018, .
- Karamoozian A, Tan CA, Wang L, Akbarzadeh MR, Chen G. 2018. Sensitivity analysis of the equal angle divider mechanism kinematics with the synthesis of the joint gap tolerances. Mech Based Des Struct Mach. 46(4):499–519. doi:https://doi.org/10.1080/15397734.2017.1362984
- Karimi N, Mahmoudi Y, Mazaheri K. 2014. Temperature fields in a channel partially filled with a porous material under local thermal non-equilibrium condition – an exact solution. Proc Inst Mech Eng Part C J Mech Eng Sci. 228(15):2778–2789. doi:https://doi.org/10.1177/0954406214521800
- Kewalramani GV, Hedau G, Saha SK, Agrawal A. 2019. Study of laminar single phase frictional factor and Nusselt number in in-line micro pin-fin heat sink for electronic cooling applications. Int J Heat Mass Transf. 138:796–808. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2019.04.118
- Khanafer K, Vafai K. 2011. A critical synthesis of thermophysical characteristics of nanofluids. Int J Heat Mass Transf. 54(19–20):4410–4428. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2011.04.048
- Leela Vinodhan V, Rajan KS. 2014. Computational analysis of new microchannel heat sink configurations. Energy Convers Manage. 86:595–604. doi:https://doi.org/10.1016/j.enconman.2014.06.038
- Li Y, Gong L, Xu M, Joshi Y. 2020. Enhancing the performance of aluminum foam heat sinks through integrated pin fins. Int J Heat Mass Transf. 151:119376. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2020.119376
- Ma DD, Xia GD, Li YF, Jia YT, Wang J. 2016. Design study of micro heat sink configurations with offset zigzag channel for specific chips geometrics. Energy Convers Manage. 127:160–169. doi:https://doi.org/10.1016/j.enconman.2016.09.013
- Mohebbi Najm Abad J, Alizadeh R, Fattahi A, Doranehgard MH, Alhajri E, Karimi N. 2020. Analysis of transport processes in a reacting flow of hybrid nanofluid around a bluff-body embedded in porous media using artificial neural network and particle swarm optimization. J Mol Liq. 313:113492. doi:https://doi.org/10.1016/j.molliq.2020.113492
- Nguyen CT, Desgranges F, Roy G, Galanis N, Maré T, Boucher S, Mintsa HA. 2007. Temperature and particle-size dependent viscosity data for water-based nanofluids – hysteresis phenomenon. Int J Heat Fluid Flow. 28(6):1492–1506. doi:https://doi.org/10.1016/j.ijheatfluidflow.2007.02.004
- Nguyen TK, Saidizad A, Jafaryar M, Sheikholeslami M, Barzegar Gerdroodbary M, Moradi R, Shafee A, Li Z. 2019. Influence of various shapes of CuO nanomaterial on nanofluid forced convection within a sinusoidal channel with obstacles. Chem Eng Res Des. 146:478–485. doi:https://doi.org/10.1016/j.cherd.2019.04.030
- Qi C, Fan F, Pan Y, Liu M, Yan Y. 2020. Effects of turbulator with round hole on the thermo-hydraulic performance of nanofluids in a triangle tube. Int J Heat Mass Transf. 146:118897. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2019.118897
- Qi C, Tang J, Fan F, Yan Y. 2020. Effects of magnetic field on thermo-hydraulic behaviors of magnetic nanofluids in CPU cooling system. Appl Therm Eng. 179:115717. doi:https://doi.org/10.1016/j.applthermaleng.2020.115717
- Ramos-Alvarado B, Li P, Liu H, Hernandez-Guerrero A. 2011. CFD study of liquid-cooled heat sinks with microchannel flow field configurations for electronics, fuel cells, and concentrated solar cells. Appl Therm Eng. 31(14–15):2494–2507. doi:https://doi.org/10.1016/j.applthermaleng.2011.04.015
- Rashidi S, Bovand M, Esfahani JA. 2015. Structural optimization of nanofluid flow around an equilateral triangular obstacle. Energy. 88:385–398. doi:https://doi.org/10.1016/j.energy.2015.05.056
- Rostami S, Aghakhani S, Hajatzadeh Pordanjani A, Afrand M, Cheraghian G, Oztop HF, Shadloo MS. 2020. A review on the control parameters of natural convection in different shaped cavities with and without nanofluid. Processes 2020, 8, 1011.
- Safdari Shadloo M 2020. Application of support vector machines for accurate prediction of convection heat transfer coefficient of nanofluids through circular pipes. International Journal of Numerical Methods for Heat & Fluid Flow, Vol. ahead-of-print No. ahead-of-print. doi:https://doi.org/10.1108/HFF-09-2020-0555
- Shahsavar Goldanlou A, Badri M, Heidarshenas B, Hussein AK, Rostami S, Safdari Shadloo M. 2020. Numerical investigation on forced hybrid nanofluid flow and heat transfer inside a three-dimensional annulus equipped with hot and cold rods: using symmetry simulation. Symmetry 2020, 12, 1873. doi:https://doi.org/10.3390/sym12111873
- Tian M-W, Rostami S, Aghakhani S, Goldanlou AS, Qi C. 2021. A techno-economic investigation of 2D and 3D configurations of fins and their effects on heat sink efficiency of MHD hybrid nanofluid with slip and non-slip flow. Int J Mech Sci. 189:105975. doi:https://doi.org/10.1016/j.ijmecsci.2020.105975
- Torabi M, Peterson GP, Torabi M, Karimi N. 2016. A thermodynamic analysis of forced convection through porous media using pore scale modeling. Int J Heat Mass Transf. 99:303–316. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2016.03.127
- Tullius JF, Vajtai R, Bayazitoglu Y. 2011. A review of cooling in microchannels. Heat Transfer Eng. 32(7–8):527–541. doi:https://doi.org/10.1080/01457632.2010.506390
- Vajjha RS, Das DK. 2009. Experimental determination of thermal conductivity of three nanofluids and development of new correlations. Int J Heat Mass Transf. 52(21–22):4675–4682. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2009.06.027
- Valizadeh Ardalan M, Alizadeh R, Fattahi A, Adelian Rasi N, Doranehgard MH, Karimi N. 2020. Analysis of unsteady mixed convection of Cu–water nanofluid in an oscillatory, lid-driven enclosure using lattice Boltzmann method. Journal of Thermal Analysis and Calorimetry, 1–17.
- Wang Y, Zhu K, Cui Z, Li H, Wei J. 2019. Evaluation of water cooling heat sink performance and dynamic flow effect. Energy Procedia. 158:2417–2422. doi:https://doi.org/10.1016/j.egypro.2019.01.294
- Wei H, Latif A, Hussain G, Heidarshenas B, Altaf K. 2019. Influence of tool material, tool geometry, process parameters, stacking sequence, and heat sink on producing sound Al/Cu lap joints through friction stir welding. Metals 2019, 9, 875. doi:https://doi.org/10.3390/met9080875
- Wu J, Zhao J, Lei J, Liu B. 2016. Effectiveness of nanofluid on improving the performance of microchannel heat sink. Appl Therm Eng. 101:402–412. doi:https://doi.org/10.1016/j.applthermaleng.2016.01.114
- Yan S-R, Aghakhani S, Karimipour A. 2020. Influence of a membrane on nanofluid heat transfer and irreversibilities inside a cavity with two constant-temperature semicircular sources on the lower wall: applicable to solar collectors. Phys Scr. 95(8):085702. doi:https://doi.org/10.1088/1402-4896/ab93e4
- Yan S-R, Hajatzadeh Pordanjani A, Aghakhani S, Shahsavar Goldanlou A, Afrand M. 2020. Managment of natural convection of nanofluids inside a square enclosure by different nano powder shapes in presence of fins with different shapes and magnetic field effect. Adv Powder Technol. 31(7):2759–2777. doi:https://doi.org/10.1016/j.apt.2020.05.009
- Yan Y, Yan H, Feng S, Li L. 2019. Thermal-hydraulic performances and synergy effect between heat and flow distribution in a truncated doubled-layered heat sink with Y-shaped fractal network. Int J Heat Mass Transf. 142:118337. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2019.06.093
- Zargartalebi M, Azaiez J. 2019. Effects of nanoparticle adsorption on heat transfer in random pin-based microchannel heat sinks. Int J Heat Mass Transf. 130:420–430. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2018.10.109
- Zhao N, Qi C, Chen T, Tang J, Cui X. 2019. Experimental study on influences of cylindrical grooves on thermal efficiency, exergy efficiency and entropy generation of CPU cooled by nanofluids. Int J Heat Mass Transf. 135:16–32. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2019.01.106