References
- SweetA. J., “Standard Relations of Light Distributions”, Transactions of the Illuminating Engineering Society, Vol. 4, 1909, p. 745.
- ChristensenM. and DeLaneyW. B., “Author's Reply—A Study of Lighting Design Procedures for High-Intensity Discharge Sources”, Illuminating Engineering, Vol. 65, January 1970, p. 48.
- SteinmetzC. P., Radiation, Light, and Illumination, McGraw-Hill Book Co., New York (1909), Lecture XI.
- HarrisonW. and AndersonE. A., “Coefficients of Utilization”, Transactions of the Illuminating Engineering Society, Vol. 15, March 1920, p. 97.
- CadyF. E. and DatesH. B. Illuminating Engineering, J. Wiley and Sons, Inc., New York (1928), Chapter V.
- BoastW. B., Illuminating Engineering, McGraw-Hill Book Co., New York (1942), Chapter 11.
- IES Lighting Handbook, First Edition 1947, Illuminating Engineering Society, Table 8–2.
- ibid., P. 8–22.
- Illumination Performance Recommendations Committee of the IES: “Classification of Luminaires by Distribution”, Illuminating Engineering, Vol. 49, November 1954, p. 552.
- IES Lighting Handbook, Fourth Edition 1966, Illuminating Engineering Society, p. A-18.
- Private communication.
- ChristensenM. and DeLaneyW. B., “A Study of Lighting Design Procedures for High-Intensity Discharge Sources”, Illuminating Engineering, Vol. 65, January 1970, p. 39.
- LevinR. E., “Discussion of Reference 12”, Illuminating Engineering, Vol. 65, January 1970, p. 45.
- FaucettR. E. and JudgeJ. R., “An Improved Method for S/MH Ratings of Luminaires with Direct Symmetrical Distribution”, Illuminating Engineering, Vol. 66, January 1971, p. 37.
- RolphT. W., “A Proposed Spacing Ratio Chart”, Illuminating Engineering, Vol. 41, November 1946, p. 775.
- KraehenbuehlJ. O., Electric Illumination, J. Wiley and Sons, Inc., New York (1951), P. 119.
- LevinR. E., “An Evaluation of VCP Calculations”, Journal of the Illuminating Engineering Society, Vol. 2, July 1973, p. 355.
- IES Lighting Handbook, Fifth Edition 1972, Illuminating Engineering Society, Figure 9–14.
- ibid., Figure 9–12.
- ibid., P. 9–33 et seq.
- SalterE. H., “Numerical Results of Photometry”, Illuminating Engineering, Vol. 55, October 1960, p. 560.
- LevinR. E. and LemonsT. M., “High Intensity Discharge Lamps and Their Environment”, Transactions of the Institute of Electrical and Electronics Engineers, Vol. IGA-7, March/April 1971, p. 218.
- GoodbarI., “Illumination Under Downlights”, Illuminating Engineering, Vol. 54, April 1959, p. 237.
- O'BrienP. F., “Analytical Study of the Pencil Shadow-Caster”, Illuminating Engineering, Vol. 63, April 1968, p. 183.
- CuttleC., “Light Patterns and the Flow of Light”, Lighting Research and Technology, Vol. 3, No. 3, 1971, p. 171.
- HigbieH. H., Lighting Calculations, J. Wiley and Sons, Inc., New York (1934), P. 429 et seq.
- American Standard Practice for Industrial Lighting, A11–1965, published by the Illuminating Engineering Society, New York, N.Y.
- MahlerE. and LeVereR., “Uniformity of Illumination (U.I.)”, Illuminating Engineering, Vol. 65, April 1970, p. 211.
- AldworthR. C. and BridgersD. J., “Design For Variety In Lighting”, Lighting Research and Technology, Vol. 3, No. 1, 1971, p. 8.