References
- KorefF. and PlautH. C. “The life of filament vacuum and gas filled lamps and the causes of failure”, Zeitschrift für technische physik, Vol. 11, 1930 p. 515; see also technisch-wissenschaftliche Abhandlungen cms dem Osram-Konzern, Band 2, 1931.
- HoistG.,LaxB.,OosterhuisE. and PiraniM. “Light density and total radiation density of tungsten spirals”, Zeitschrift für technische physik, Vol. 9, 1928, p. 186.
- JonesH. A. and LangmuirI. “The characteristics of tungsten filaments as functions of temperature”, Part II, General electric review, Vol. 30, 1927, p. 354.
- CovingtonE. J. “The Langmuir film model in incandescent lamps”, Illuminating Engineering, Vol. 63, No. 4, April 1968, p. 134.
- ElenbaasW. Light Sources, Crane, Russak and Co., Inc., New York, 1972, p. 24.
- CovingtonE. J. “The life-voltage exponent for tungsten lamps”, Journal of the Illuminating Engineering Society, Vol. 2, No. 2, January 1973, p. 83.
- CovingtonE. J. “Hot spot burnout of tungsten filaments”, Journal of the Illuminating Engineering Society, Vol. 2, No. 4, July 1973, p. 372.
- HörsterH.,KauerE. and LechnerW. “A concept for the burning-out mechanism of an incandescent tungsten wire”, Journal of the Illuminating Engineering Society, Vol. 1, No. 4, July 1972, p. 309.
- PrásnikL. “The determination of the maximum temperature in the vicinity of a cross sectional constriction of a wire glowing in an inert gas”, Zeitschrift für physik, Vol. 99, 1936, p. 710.
- FlynnD. R. and PeavyB. A.Jr., Seventh Conference on Thermal Conductivity, NBS Special Publication 302, September 1968.
- JonesH. A. and LangmuirI. The characteristics of tungsten, Table II, Column 4.
- Ivan Berlec (General Electric Company, Nela Park, Cleveland, Ohio) kindly permitted his experimental data to be presented in Fig. 1. Many helpful conservations on the subject matter of this paper were held with C. C. Baker (also of General Electric Company.)