Investigation on crystallization kinetics and solidification behavior of isotactic polypropylene (iPP) using an enthalpy transformation method

References

• Cryer CC, Crank J. Free and moving boundary problems. Math Comput. 1986;174(46):429–500.
   Google Scholar
• Yuan MD, Ren YX, Xu C, et al. Characterization and stability study of a form-stable erythritol/expanded graphite composite phase change material for thermal energy storage. Renew Energ. 2019;136:211–222.
   Web of Science ®Google Scholar
• Sheikholeslami M, Mahian O. Enhancement of PCM solidification using inorganic nanoparticles and an external magnetic field with application in energy storage systems. J Clean Prod. 2019;215:963–977.
   Web of Science ®Google Scholar
• Umair MM, Zhang Y, Iqbal K, et al. Novel strategies and supporting materials applied to shape-stabilize organic phase change materials for thermal energy storage-A review. Appl Energ. 2019;235:846–873.
   Web of Science ®Google Scholar
• Narvaez GF, Schettini EB, Silvestrini JH. Numerical simulation of flow-induced vibration of two cylinders elastically mounted in tandem by immersed moving boundary method. Appl Math Model. 2020;77(2):1331–1347.
   Google Scholar
• Hao J, Chen Q, Hu K. Porosity distribution optimization of insulation materials by the variational method. Int J Heat Mass Transf. 2016;92:1–7.
   Web of Science ®Google Scholar
• Zhang T, Feng XL, Yuan JY. Implicit-explicit schemes of finite element method for the non-stationary thermal convection problems with temperature-dependent coefficients. Int Commun Heat Mass. 2016;76:325–336.
   Web of Science ®Google Scholar
• Zhai SY, Qian LZ, Gui DW. A block-centered characteristic finite difference method for convection-dominated diffusion equation. Int Commun Heat Mass. 2015;61:1–7.
   Web of Science ®Google Scholar
• Yao WA, Yu B, Gao XW, et al. A precise integration boundary element method for solving transient heat conduction problems. Int J Heat Mass Transf. 2014;78:883–891.
   Web of Science ®Google Scholar
• Kozak Y, Ziskind G. Novel enthalpy method for modeling of PCM melting accompanied by sinking of the solid phase. Int J Heat Mass Transf. 2017;112:568–586.
   Web of Science ®Google Scholar
• Hasečić A, Muzaferija S, Demirdžića I. Finite volume method for multiphase flows with radiation and phase change. Int J Therm Sci. 2020;149:106201.
   Web of Science ®Google Scholar
• Yang B, Shi Y, Li GJ, et al. Investigation on solidification behavior of high-density polyethylene during Thin-Walled injection molding: correlation between crystallization kinetics and thermal gradient Field. Plast Rubber Compos. 2016;45(9):398–406.
   Web of Science ®Google Scholar
• Yang B, Ding MY, Hu L, et al. Melt crystallization behavior of injection-molded high-density polyethylene based Upon a solidification kinetic analysis. J Macromol Sci Part B: Phys. 2019;58(1):42–58.
   Web of Science ®Google Scholar
• Yang B, Ding MY, Shi Y, et al. Temperature and shear rate distributions of gas-assisted injection molded (GAIM) polypropylene and the application in Forecast of cooling time. J Appl Polym Sci. 2019;136:47390.
   Web of Science ®Google Scholar
• Xu XY, Sanei SHR, Steinmetz E, et al. Effect of microstructure uncertainty and testing frequency on storage and loss moduli of injection molded MWCNT reinforced polyamide 66 nanocomposites. Polym Test. 2020;85:106455.
   Web of Science ®Google Scholar
• Kim JS, Kim YS, Kim YC. Effect of carbon fiber orientation on the physical properties and crystallization behavior of Nylon 66/Carbon Filler composites. Polym Korea. 2019;43(4):547–552.
   Web of Science ®Google Scholar
• Zhao H, Zhao G. Mechanical and thermal properties of conventional and microcellular injection molded poly (lactic acid)/poly (ϵ-caprolactone) blends. J Mech Behav Biomed. 2016;53:59–67.
   PubMed Web of Science ®Google Scholar
• Zhao H, Yan X, Zhao G, et al. Microcellular injection molded polylactic acid/poly (ϵ-caprolactone) blends with supercritical CO2: correlation between rheological properties and their foaming behavior. Polym Eng Sci. 2016;56:939–946.
   Web of Science ®Google Scholar
• Zhao HB, Liu X, Sui Y, et al. Transition from the hierarchical distribution to a homogeneous formation in injection molded isotactic polypropylene (iPP) with dynamic mold temperature control. Polym Test. 2017;60:299–306.
   Web of Science ®Google Scholar
• Cho SJ, Kim KM, Lee KH. Effect of melt Shearing on the crystallization rate of poly(ethylene terephthalate). Polym Korea. 2018;42(5):788–792.
   Web of Science ®Google Scholar
• Hou FY, Mi DS, Zhou M, et al. The influences of a novel shear layer-spherulites layer alternated structure on the mechanical properties of injection-molded isotactic polypropylene. Polymer (Guildf). 2017;122:12–21.
   Web of Science ®Google Scholar
• Kang D, Oh S, Kim HI. Improvement of physical properties of polypropylene chemical Foam by Glass Fiber Reinforcement. Polym Korea. 2019;43(4):589–594.
   Web of Science ®Google Scholar
• Meyer T, Harland A, Haworth B, et al. The influence of different melt temperatures on the mechanical properties of injection molded PA-12 and the post process detection by thermal analysis. Int Polym Proc. 2017;32(1):90–101.
   Web of Science ®Google Scholar
• Park SY, Rhee GH, Nam YH, et al. Structural Stability study using thermal and structural analysis of a Bimetal Cylinder in an injection molding Machine. Polym Korea. 2015;39(5):775–781.
   Web of Science ®Google Scholar
• Kaygusuz I, Kaynak C. Influences of halloysite nanotubes on crystallisation behaviour of polylactide. Plast Rubber Compos. 2015;44:41–49.
   Web of Science ®Google Scholar
• Almajid A, Friedrich K, Noll A, et al. Poly-para-phenylene-copolymers (PPP) for extrusion and injectionmoulding part 1-molecular and rheological differences. Plast Rubber Compos. 2013;42:123–128.
   Web of Science ®Google Scholar
• Ngaowthong C, Rungsardthong V, Siengchin S. Polypropylene/hemp woody core fiber composites: morphology, mechanical, thermal properties, and water absorption behaviors. Adv Mech Eng. 2016;8(3):1687814016638318.
   Web of Science ®Google Scholar
• Wardani AK, Ariono D, Yespin Y, et al. Preparation of hydrophilic polypropylene membrane by acid dipping technique. Mater Res Express. 2019;6(7):075308.
   Web of Science ®Google Scholar
• Triwulandari E, Ghozali M, Sondari D, et al. Effect of lignin on mechanical, biodegradability, morphology, and thermal properties of polypropylene/polylactic acid/lignin biocomposite. Plast Rubber Compos. 2019;48(2):82–92.
   Web of Science ®Google Scholar
• Himma NF, Wardani AK, Wenten IG. Preparation of Superhydrophobic polypropylene Membrane using Dip-Coating method: The effects of solution and process parameters. Polym Plast Technol. 2017;56(2):184–194.
   Web of Science ®Google Scholar
• Saroj AL, Chaurasia SK, Singh RK. Isothermal and non-isothermal crystallization kinetics of PVA+ionic liquid [BDMIM][BF4]-based polymeric films. Phase Transit. 2015;89(6):578–597.
   Web of Science ®Google Scholar
• Yang X, Tuinea-Bobe C, Whiteside B, et al. Molecular weight dependency of beta phase formation in injection-molded isotactic polypropylene. J Appl Polym Sci. 2020;137(15):48555.
   Web of Science ®Google Scholar
• Ong MY, Chow WS. Kinetics of crystallization for polypropylene/polyethylene/halloysite nanotube nanocomposites. J Thermoplast Compos. 2020;33(4):451–463.
   Web of Science ®Google Scholar
• An YJ, Wang SH, Li R, et al. Effect of different nucleating agent on crystallization kinetics and morphology of polypropylene. E-Polymers. 2019;19(1):32–39.
   Web of Science ®Google Scholar
• Hu L, Yang B, Deng YL, et al. A Novel kinetic analysis of crystallization of polypropylene (PP) in Dynamically-vulcanized PP/ethylene-propylene-diene Rubber (EPDM) blends using an In-situ measurement Technique. Polym Korea. 2017;41(4):569–578.
   Web of Science ®Google Scholar
• Yang B, Shi Y, Miao JB, et al. Evaluation of rheological and thermal properties of polyvinylidene fluoride (PVDF)/graphene nanoplatelets (GNP) composites. Polym Test. 2018;67:122–135.
   Web of Science ®Google Scholar
• Yang B, Hu L, Xia R, et al. Effect of different Nanofillers on non-isothermal crystallization kinetics and Electric conductivity of Dynamically-Vulcanized PP-EPDM blends. Macromol Res. 2016;24(1):74–82.
   Web of Science ®Google Scholar
• Yang B, Pan Y, Yu YN, et al. Filler network structure in graphene nanoplatelet (GNP)-filled polymethyl methacrylate (PMMA) composites: from thermorheology to electrically and thermally conductive properties. Polym Test. 2020;89:106575.
   Web of Science ®Google Scholar