The influence of different parameters on the performance of the compression ignition engine

References

• Angulo-Brown, F., J. Fernandez-Betanzos, and C. A. Diaz-Pico. 1994. “Compression Ratio of an Optimized Air Standard Otto-Cycle Model.” European Journal of Physics 15: 38–42. doi: 10.1088/0143-0807/15/1/007
   Google Scholar
• Anthoine, M. P., A. Dauron, and M. Serine. 1992. “Régulation adaptative de richesse avec sonde propotionnelle et actionneur papillon.” SIA, 92032.
   Google Scholar
• Benson, R. S., and P. C. Baruah. 1973. “Some Further Tests on a Computer Program to Simulate Internal Combustion Engine.” SAE Technical Paper, 730667.
   Google Scholar
• Chen, L., J. Lin, J. Lou, F. Sun, and C. Wu. 2002. “Friction Effect on the Characteristic Performances of Diesel Engines.” International Journal of Energy Research 26: 965–971. doi: 10.1002/er.820
   Web of Science ®Google Scholar
• Dec, J. E. 2009. “Advanced Compression Ignition Engines – Understanding the In-Cylinder Processes.” Proceedings of the Combustion Institute 32: 2727–2742. doi: 10.1016/j.proci.2008.08.008
   Web of Science ®Google Scholar
• Ebrahimi, R. 2009. “Performance of an Irreversible Diesel Cycle under Variable Stroke Length and Compression Ratio.” Journal of Ambiant Science 7: 58–64.
   Google Scholar
• Galindo, J., F. J. Arnau, A. Tiseira, and P. Piqueras. 2010. “Solution of the Turbocompressor Boundary Condition for One-Dimensional Gas-Dynamic Codes.” Mathematical and Computer Modelling 52: 1288–1297. doi: 10.1016/j.mcm.2010.05.003
   Web of Science ®Google Scholar
• Gamma Technologies. Inc. 2009. GT-Power User's Manual, GT-Suite Version 7.0. New York City, Dr. Thomas Morel; President and Funder.
   Google Scholar
• Gunter, P., C. Schwarz, G. Stiesch, and F. Otto. 2006. Simulation Combustion and Pollutant Formation for Engine-Development. Berlin: Springer-Verlag.
   Google Scholar
• Guzzella, L., and A. Amstutz. October 1998. “Control of Diesel Engines.” IEEE Transaction on Control Systems 18: 53–71. doi: 10.1109/37.722253
   Web of Science ®Google Scholar
• Heywood, J. B. 1988. Internal Combustion Engine Fundamentals. New York: McGraw-Hill.
   Google Scholar
• Hohenberg, G. F. 1979. “Advanced Approaches for Heat Transfer Calculations.” SAE Technical Paper, 1979-790825.
   Google Scholar
• Ledger, J. D., and S. Walmsley. 1971. “Computer Simulation of a Turbocharged Diesel Engine Operating under Transient Load Conditions.” SAE Technical Paper, 710177.
   Google Scholar
• Menacer, B., and M. Bouchetara. 2013. “Simulation and Prediction of the Performance of a Direct Turbocharged Diesel Engine.” Simulation: Transactions of the Society for Modeling and Simulation International 89 (11): 1355–1368.
   Google Scholar
• Merabet, A., M. Feidt, and A. Bouchoucha. 2002. “Effet du transfert de chaleur sur les performances d'un moteur a combustion interne atmosphérique fonctionnant suivant un cycle mixte.” Termotehnica 2: 43–46.
   Google Scholar
• Rakopoulos, C. D., C. D. Rakopoulos, G. C. Mavropoulos, and E. G. Giakoumis. 2004. “Experimental and Theoretical Study of the Short-Term Response Temperature Transients in the Cylinder Walls of a Diesel Engine at Various Operating Conditions.” Applied Thermal Engineering 24: 679–702. doi: 10.1016/j.applthermaleng.2003.11.002
   Web of Science ®Google Scholar
• Sakhrieha, A., and E. Abu-Nada. 2010. “Computational Thermodynamic Analysis of Compression Ignition Engine.” International Communications in Heat and Mass Transfer 37: 299–303. doi: 10.1016/j.icheatmasstransfer.2009.11.002
   Web of Science ®Google Scholar
• Semin, R. B., and R. Ismail. 2008. “Investigation of Diesel Engine Performance Based on Simulation.” American Journal of Applied Sciences 5: 610–617. doi: 10.3844/ajassp.2008.610.617
   Google Scholar
• Stefanopoulou, A. 1996. “Modeling and Control of Advanced Technology Engines.” PhD thesis, University of Michigan.
   Google Scholar
• Venkatraman, M., and G. Devaradjane. 2011. “Computer Modeling of a CI Engine for Optimization of Operating Parameters such as Compression Ratio, Injection Timing and Injection Pressure for Better Performance and Emission Using Diesel-Diesel Biodiesel Blends.” American Journal Applied Science 8: 897–902. doi: 10.3844/ajassp.2011.897.902
   Google Scholar
• Watson, N. 1981. “Transient Performance Simulation and Analysis of Turbocharged Diesel Engines.” SAE Technical Paper, 810338.
   Google Scholar
• Watson, N., A. D. Pilley, and M. Marzouk. 1980. “A Combustion Correlation for Diesel Engine Simulation.” SAE Technical Paper, 1980-800029.
   Google Scholar
• Winterborne, D. E., C. Thiruarooran, and P. E. Wellstead. 1977. “A Wholly Dynamical Model of a Turbocharged Diesel Engine for Transfer Function Evaluation.” SAE Technical Paper, 770124.
   Google Scholar