Development of draft tube in hydro-turbine: a review

References

• Adane, K. K., S. J. Ormiston, and M. F. Tachie. 2008. “Numerical Investigation of Flow Recirculation in a Draft Tube.” Journal of Hydraulic Research 46 (1): 15–20.
   Web of Science ®Google Scholar
• Čarija, Z., Z. Mrša, and L. Dragović. 2006. “Turbulent Flow Simulation in Kaplan Draft Tube.” 5th International Congress of Croatian Society of Mechanics, Trogir/Split, Croatia, September 21–23.
   Google Scholar
• Casartelli, E., and T. Staubli. 2006. Impact of Rotor Side Space Flow on Draft Tube Performance. HydroVision.
   Google Scholar
• Cervantes, M. J. 2007. “Radial Velocity at the Inlet of the Turbine-99 Draft Tube.” 2nd IAHR International Meeting of the Workgroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems Timisoara, Romania, October 24–26.
   Google Scholar
• Cervantes, M. J. 2009. “Counter Rotating Rumnner Cone in a Kaplan Elbow Draft Tube for Increased Efficiency.” 3rd IAHR international meeting of the Work Group on Cavitation and Dynamic Problems in Hydro Machinery, Czech Republic.
   Google Scholar
• Cervantes, M. J., and F. Engström. 2005. “Eddy Viscosity Turbulence Models and Steady Draft Tube Simulations.” Proceedings of the third IAHR/ ERCOFTAC workshop on draft tube flow, Porjus, Sweden, December 8–9.
   Google Scholar
• Cook, C. B., M. C. Richmond, and J. A. Serkowski. 2007. “Observations of Velocity Conditions Near a Hydroelectric Turbine Draft Tube Exit Using ADC Measurements.” Flow Measurement and Instrumentation 18: 148–155.
   Web of Science ®Google Scholar
• Eisinger, R., and A. Ruprecht. 2002. “Automatic Shape Optimization of Hydro Turbine Components Based on CFD.” Task Quarterly 6 (1): 101–111.
   Google Scholar
• Gouin, P., C. Deschene, and M. Iliescu. 2009. “ Experimental Investigation of Draft Tube Flow of an Axial Turbine by Laser Doppler Velocimetry.” 3rd IAHR International Meeting of the Workgroup on Cavitations and Dynamic Problems in Hydraulic Machinery and Systems, Brno, Czech Republic, October 14–16.
   Google Scholar
• Henau, V. D., and F. A. Payette. 2010. “Computational Study of a Low Head Draft Tube and Validation with Experimental Data.” 25th IAHR Symposium on Hydraulic Machinery and Systems, Timisoara, Romania.
   Google Scholar
• Jonsson, P. P., Mulu, B. G., and M. G. Cervantes. 2012. “Experimental Investigation of a Kaplan Draft Tube – Part II: Off-Design Conditions.” Applied Energy 94: 71–83.
   Web of Science ®Google Scholar
• Khare, R., V. Prasad, and S. K. Mittal. 2012. “Effect of Runner Solidity on Performance of Elbow Draft Tube.” Energy Procedia 14: 2054–2059.
   Google Scholar
• Kirschner, O., S. Muntean, and R. S. Resiga. 2007. “Swirling Flow in a Straight Cone Draft Tube: Axi-symmetric Flow Analysis and Comparison with Circumferentially Averaged PIV Measurements.” 2nd IAHR International Meeting of the Workgroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems, Timisoara, Romania, October 24–26.
   Google Scholar
• Kirschner, O., and A. Ruprecht. 2007. “Velocity Measurement with PIV in a Straight Cone Draft Tube.” 3rd German–Romanian Workshop on Turbo Machinery Hydrodynamics, Timisoara, Romania, May 10–12.
   Google Scholar
• Marjavaara, B. D. 2006. “CFD Driven Optimization of Hydraulic Turbine Draft Tube Using Surrogate Model.” Doctoral thesis, Lulea University of Technology, Honolulu, Hawaii.
   Google Scholar
• Marjavaara, B. D., and T. S. Lundström. 2003. “Automatic Shape Optimization of a Hydropower Draft Tube.” Proceedings of the 4th ASME/JSME Joint fluids Engineering Conference, 1819–1824.
   Google Scholar
• Marjavaara, B. D., and T. S. Lundström. 2005. “Steady and Unsteady CFD Simulation of the Turbine-99 Draft Tube Using CFX and STREAM.” 3rd IAHR/ERCOFTAC Workshop on Draft tube Flow, Porjus, Sweden, December 8–9.
   Google Scholar
• Marjavaara, B. D., and T. S. Lundström. 2006a. “Response Surface-Based Shape Optimization of a Francis Draft Tube.” International Journal of Numerical Methods for Heat & Fluid Flow 17 (1): 34–45.
   Web of Science ®Google Scholar
• Marjavaara, B. D., and T. S. Lundström. 2006b. “Redesign of a Sharp Heel Draft Tube by a Validated CFD-Optimization.” International Journal for Numerical Methods in Fluids 50: 911–924.
   Web of Science ®Google Scholar
• Mulu, B. G., and P. P. Jonsson. 2012. “Experimental Investigation of a Kaplan Draft Tube – Part I: Best Efficiency Point.” Applied Energy 93: 695–706.
   Web of Science ®Google Scholar
• Muntean, S., T. Ciocan, R. F. Susan-Resiga, and T. Cervantes. 2012. “Mathematical, Numerical and Experimental Analysis of the Swirling Flow at a Kaplan Runner Outlet.” 26th IAHR Symposium on Hydraulic Machinery and System, Beijing, China.
   Google Scholar
• Neto, A., R. J. Zuerker, A. Jung, and M. Maiwal. 2012. “Evaluation of a Francis Turbine Draft Tube Flow at Part Load Using Hybrid RANS-LES Turbulence Modeling.” 26th IAHR Symposium on Hydraulic Machinery and Systems, Beijing, China.
   Google Scholar
• Nilsson, H., and M. J. Cervantes. 2012. “Effects of Inlet Boundary Conditions, on the Computed Flow in Turbine-99 Draft Tube, Using OpenFOAM and CFX.” 26th IAHR Symposium on Hydraulic Machinery and Systems, Beijing, China.
   Google Scholar
• Prasad, V., R. Khare, and A. Chincholikar. 2010. “Hydraulic Performance of Elbow Draft Tube for Different Geometric Configurations Using CFD.” IGHEM-2010, Ahec, IIT, Roorkee, India, October.
   Google Scholar
• Ruprecht, A., T. Helmrich, and T. Aschenbrenner. 2002. “Simulation of Vortex Rope in a Turbine Draft Tube.” Proceedings of the Hydraulic Machinery and Systems 21st IAHR Symposium, Lausanne, September 9–12.
   Google Scholar
• Sanda, M., G. Dan, and F. Avellan. 2008. “Analysis of the Cavitating Draft Tube Vortex in a Francis Turbine Using Particle Image Velocimetry Measurements in Two-Phase Flow.” Journal of Fluids Engineering 130: 021105-1.
   Web of Science ®Google Scholar
• Soni, V., A. Roghelia, J. Desai, and V. Chauhan. 2010. “Design Development of Optimum Draft Tube for High Head Francis Turbine Using CFD.” 4th International Conference on Fluid Mechanics and Fluid Power, IIT Madras, Chennai, India, December 16–18.
   Google Scholar
• Staubli, T., and D. Meyer. 1999. “Draft Tube Calculations.” Turbine 99 Workshop on Draft Tube Flow, Porjus June 20–23.
   Google Scholar
• Susan, R., S. Muntean, G. Dan, and B. Nennemann. 2006. “Jet Control of the Draft Tube Vortex Rope in Francis Turbines at Partial Discharge.” 23rd IAHR Symposium, Yokohama.
   Google Scholar
• Susan-Resiga, R., and S. Muntean. 2012. “Influence of the Velocity Field at the Inlet of a Francis Turbine Draft Tube on Performance over an Operating Range.” 26th IAHR Symposium on Hydraulic Machinery and Systems, Beijing, China.
   Google Scholar
• Tridon, S., and S. Barre. 2010. “Experimental Investigation of Draft Tube Flow Instability.” 25th IAHR Symposium on Hydraulic Machinery and Systems.
   Google Scholar
• Tridon, S., S. Barre, Gabriel Dan Ciocan, and Laurent Tomas. 2010. “Experimental Analysis of the Swirling Flows in a Francis Turbine Draft Tube: Focus on Radial Velocity Component Determination.” European Journal of Mechanics and Fluids 29: 321–335.
   Web of Science ®Google Scholar
• Zeng, Y., X. Liu, and H. Wang. 2012. “Prediction and Experimental Verification of Vortex Flow in Draft Tube of Francis Turbine Based on CFD.” Procedia Engineering 31: 196–205.
   Google Scholar