Heat transfer enhancement in cylindrical fins through longitudinal parabolic perforations

References

• Arslanturk, C. 2005. “Simple Correlation Equations for optimum Design of Annular Fins with Uniform Thickness.” Applied Thermal Engineering 25 (14): 2463–2468. doi: 10.1016/j.applthermaleng.2004.12.007
   Web of Science ®Google Scholar
• Arslanturk, C. 2011. “Performance Analysis and Optimization of Radiating Fins with a Step Change in Thickness and Variable Thermal Conductivity by Homotopy Perturbation Method.” Heat and Mass Transfer 47 (2): 131–138. doi: 10.1007/s00231-010-0673-8
   Web of Science ®Google Scholar
• Asadi, M., and R. H. Khoshkho. 2013. “Temperature Distribution Along a Constant Cross Sectional Area Fin.” International Journal of Mechanics and Applications 5 (3): 131–137.
   Google Scholar
• Azarkish, H., S. M. H. Sarvari, and A. Behzadmehr. 2010. “Optimum Geometry Design of a Longitudinal Fin with Volumetric Heat Generation Under the Influences of Natural Convection and Radiation.” Energy Conversion and Management 51: 1938–1946. doi: 10.1016/j.enconman.2010.02.026
   Web of Science ®Google Scholar
• Aziz, A., and H. Nguyen. 1993. “Two-dimensional Performance of Convecting-radiating Fins of Different Profile Shapes.” Wärme – und Stoffübertragung 28 (8): 481–487. doi: 10.1007/BF01539679
   Web of Science ®Google Scholar
• Bergman, T. L., Adrienne S. Lavine, Frank P. Incropera, David P. DeWitt. 2011. Fundamentals of Heat and Mass Transfer. 7th ed. Hoboken, NJ: John Wiley & Sons.
   Google Scholar
• Bernfeld, S. R., and V. Lakshmikantham. 1974. An Introduction to Nonlinear Boundary Value Problems. New York, NY: Academic Press.
   Google Scholar
• Çengel, Y. A., and J. M. Cimbala. 2006. Fluid Mechanics: Fundamentals and Applications. Boston, MA: McGraw-Hill Higher Education.
   Google Scholar
• Cheng, X.-T., Qin-Zhao Zhang, Xiang-Hua Xu, and Xin-Gang Liang. 2013. “Optimization of fin Geometry in Heat Convection with Entransy Theory.” Chinese Physics B 22 (2): 020503. doi: 10.1088/1674-1056/22/2/020503
   Web of Science ®Google Scholar
• Cuce, E. 2014. “Development of Innovative Window and Fabric Technologies for Low-carbon Buildings.” PhD Thesis, The University of Nottingham.
   Google Scholar
• Cuce, E. 2015. Toward Thermal Superinsulation Technologies in Buildings: Latest Developments in Glazing and Building Fabric. Saarbrücken: LAP Lambert Academic.
   Google Scholar
• Cuce, E., and T. Bali. 2009a. “A Comparison of Energy and Power Conversion Efficiencies of m-Si and p-Si PV Cells in Trabzon.” In Fifth International Advanced Technologies Symposium, Karabuk, May 13–15 .
   Google Scholar
• Cuce, E., and T. Bali. 2009b. “Comparison of Energy, Power Conversion and Exergy Efficiencies of Monocrystalline Silicon Photovoltaic Module at Different Illumination Intensities and Cell Temperatures.” 17. Ulusal Isı Bilimi ve Teknigi Kongresi, Sivas, June 24–27.
   Google Scholar
• Cuce, E., and T. Bali. 2009c. “Variation of Cell Parameters of a p-Si PV Cell with Different Solar Irradiances and Cell Temperatures in Humid Climates.” In Fourth International Exergy, Energy and Environment Symposium, Sharjah, United Arab Emirates, April 19–23.
   Google Scholar
• Cuce, E., and T. Bali. 2010. Improving Performance Parameters of Silicon Solar Cells Using Air Cooling.” In Fifth International Ege Energy Symposium and Exhibition, Denizli, Turkey, June 27–30.
   Google Scholar
• Cuce, E., T. Bali, and S. A. Sekucoglu. 2011. “Effects of Passive Cooling on Performance of Silicon Photovoltaic Cells.” International Journal of Low-Carbon Technologies 6 (4): 299–308. doi: 10.1093/ijlct/ctr018
   Google Scholar
• Cuce, P. M., and E. Cuce. 2012a. “A Novel Model of Photovoltaic Modules for Parameter Estimation and Thermodynamic Assessment.” International Journal of Low-Carbon Technologies 7 (2): 159–165. doi: 10.1093/ijlct/ctr034
   Google Scholar
• Cuce, E., and P. M. Cuce. 2012b. “Homotopy Perturbation Method for Temperature Distribution, fin Efficiency and fin Effectiveness of Convective Straight Fins with Temperature-dependent Thermal Conductivity.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 227 (8): 1754–1760.
   Web of Science ®Google Scholar
• Cuce, E., and P. M. Cuce. 2013a. “A Comprehensive Review on Solar Cookers.” Applied Energy 102: 1399–1421. doi: 10.1016/j.apenergy.2012.09.002
   Web of Science ®Google Scholar
• Cuce, E., and P. M. Cuce. 2013b. “Effects of Concavity Level on Heat Loss, Effectiveness and Efficiency of a Longitudinal fin Exposed to Natural Convection and Radiation.” International Journal of Numerical Methods for Heat and Fluid Flow 23 (7): 1169–1178. doi: 10.1108/HFF-03-2011-0054
   Web of Science ®Google Scholar
• Cuce, P. M., and E. Cuce. 2013c. “Passive Cooling of Building-Integrated Photovoltaics (BIPVs) for Better Electrical Performance.” In MEGS IV Annual Conference, Public Engagement with Energy, Loughborough, September 12–13.
   Google Scholar
• Cuce, E., and P. M. Cuce. 2013d. “Tilt Angle Optimization of Building-Integrated Photovoltaics (BIPVs) for Cooler Operating Temperatures. In MEGS IV Annual Conference, Public Engagement with Energy, Loughborough, September 12–13.
   Google Scholar
• Cuce, E., and P. M. Cuce. 2014. “Tilt Angle Optimization and Passive Cooling of Building-Integrated Photovoltaics (BIPVs) for Better Electrical Performance.” Arabian Journal for Science and Engineering 39 (11): 8199–8207. doi: 10.1007/s13369-014-1394-y
   Web of Science ®Google Scholar
• Cuce, E., and P. M. Cuce. 2015. “A Successful Application of Homotopy Perturbation Method for Efficiency and Effectiveness Assessment of Longitudinal Porous Fins.” Energy Conversion and Management 93: 92–99. doi: 10.1016/j.enconman.2015.01.003
   Web of Science ®Google Scholar
• Cuce, E., P. M. Cuce, and T. Bali. 2013. “An Experimental Analysis of Illumination Intensity and Temperature Dependency of Photovoltaic Cell Parameters.” Applied Energy 111: 374–382. doi: 10.1016/j.apenergy.2013.05.025
   Web of Science ®Google Scholar
• Cuce, E., D. Harjunowibowo, and P. M. Cuce. 2016. “Renewable and Sustainable Energy Saving Strategies for Greenhouse Systems: A Comprehensive Review.” Renewable and Sustainable Energy Reviews 64: 34–59. doi: 10.1016/j.rser.2016.05.077
   Web of Science ®Google Scholar
• Fabbri, G. 1997. “A Genetic Algorithm for Fin Profile Optimization.” International Journal of Heat and Mass Transfer 40 (9): 2165–2172. doi: 10.1016/S0017-9310(96)00294-3
   Web of Science ®Google Scholar
• Ghasemi, S. E., M. Hatami, and D. D. Ganji. 2014. “Thermal Analysis of Convective Fin with Temperature-dependent Thermal Conductivity and Heat Generation.” Case Studies in Thermal Engineering 4: 1–8. doi: 10.1016/j.csite.2014.05.002
   Google Scholar
• Harjunowibowo, D., S. B. Riffat, E. Cuce, S. A. Omer, and Y. Ding. 2016. “Recent Passive Technologies of Greenhouse Systems: A Review. In Fifteenth International Conference on Sustainable Energy Technologies, Singapore, July 19–22.
   Google Scholar
• Kobus, C. J., and R. B. Cavanaugh. 2006. “A Theoretical Investigation into the Optimal Longitudinal Profile of a Horizontal Pin Fin of Least Material Under the Influence of Pure Forced and Pure Natural Convection With a Diameter-Variable Convective Heat Transfer Coefficient.” Journal of Heat Transfer 128 (8): 843–846. doi: 10.1115/1.2227041
   Web of Science ®Google Scholar
• Kraus, A. D. 1988. “Sixty-Five Years of Extended Surface Technology (1922–1987).” Applied Mechanics Reviews 41 (9): 321–364. doi: 10.1115/1.3151910
   Google Scholar
• Kundu, B., and K.-S. Lee. 2012. “Shape Optimization for the Minimum Volume of Pin Fins in Simultaneous Heat and Mass Transfer Environments.” Heat and Mass Transfer 48 (8): 1333–1343. doi: 10.1007/s00231-012-0979-9
   Web of Science ®Google Scholar
• Malekzadeh, P., H. Rahideh, and G. Karami. 2006. “Optimization of Convective–Radiative Fins by Using Differential Quadrature Element Method.” Energy Conversion and Management 47 (11): 1505–1514. doi: 10.1016/j.enconman.2005.08.003
   Web of Science ®Google Scholar
• Malekzadeh, P., H. Rahideh, and A. R. Setoodeh. 2007. “Optimization of Non-symmetric Convective–Radiative Annular Fins by Differential Quadrature Method.” Energy Conversion and Management 48 (5): 1671–1677. doi: 10.1016/j.enconman.2006.11.002
   Web of Science ®Google Scholar
• Mert Cuce, P., and E. Cuce. 2014. “Optimization of Configurations to Enhance Heat Transfer from a Longitudinal Fin Exposed to Natural Convection and Radiation.” International Journal of Low-Carbon Technologies 9 (4): 305–310. doi: 10.1093/ijlct/ctt005
   Google Scholar
• Mikk, I. 1980. “Convective Fin of Minimum Mass.” International Journal of Heat and Mass Transfer 23 (5): 707–711. doi: 10.1016/0017-9310(80)90015-0
   Web of Science ®Google Scholar
• Mueller, D. W., and H. I. Abu-Mulaweh. 2006. “Prediction of the Temperature in a Fin Cooled by Natural Convection and Radiation.” Applied Thermal Engineering 26 (14): 1662–1668. doi: 10.1016/j.applthermaleng.2005.11.014
   Web of Science ®Google Scholar
• Patra, A., and S. Saha Ray. 2016. “Analysis for Fin Efficiency with Temperature-dependent Thermal Conductivity of Fractional Order Energy Balance Equation Using HPST Method.” Alexandria Engineering Journal 55 (1): 77–85. doi: 10.1016/j.aej.2016.01.009
   Web of Science ®Google Scholar
• Razelos, P. 2003. “A Critical Review of Extended Surface Heat Transfer.” Heat Transfer Engineering 24 (6): 11–28. doi: 10.1080/714044411
   Web of Science ®Google Scholar
• Ross, R. G. 1980. “Flat-Plate Photovoltaic Array Design Optimization.” In 14th IEEE Photovoltaic Specialists Conference, San Diego, CA.
   Google Scholar
• Sobamowo, M. G. 2017. “Analysis of Convective Longitudinal Fin with Temperature-dependent Thermal Conductivity and Internal Heat Generation.” Alexandria Engineering Journal 56 (1): 1–11. doi: 10.1016/j.aej.2016.04.022
   Web of Science ®Google Scholar
• Tiris, Ç, M. Tiris, and I. E. Türe. 1995. “Effects of Fin Design on Collector Efficiency.” Energy 20 (10): 1021–1026. doi: 10.1016/0360-5442(95)00055-L
   Web of Science ®Google Scholar
• Ullmann, A., and H. Kalman. 1989. “Efficiency and Optimized Dimensions of Annular Fins of Different Cross-section Shapes.” International Journal of Heat and Mass Transfer 32 (6): 1105–1110. doi: 10.1016/0017-9310(89)90010-0
   Web of Science ®Google Scholar