88
Views
12
CrossRef citations to date
0
Altmetric
Reviews

Detailed analysis on injection timing retardation and simultaneous technology in a biodiesel-powered compression ignition engine

&
Pages 1437-1440 | Received 21 May 2018, Accepted 08 Jul 2018, Published online: 31 Jul 2018

References

  • Banapurmath, N. R., P. G. Tewari, and R. S. Hosmath. 2009. “Effect of Biodiesel Derived from Honge oil and its Blends with Diesel When Directly Injected at Different Injection Pressures and Injection Timings in Single-Cylinder Water-Cooled Compression Ignition Engine.” Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power Energy 223: 31–40.
  • Dhananjaya, A., V. Sudhir, and P. Mohanan. 2010. “Combustion Characteristics of Diesel Engine Operating on Jatropha Oil Methyl Ester.” Thermal Science 14: 965–977. doi: 10.2298/TSCI1004965D
  • Ganapathy, T., R. P. Gakkhar, and K. Murugesan. 2011. “Influence of Injection Timing on Performance, Combustion and Emission Characteristics of Jatropha Biodiesel Engine.” Applied Energy 88: 4376–4386. doi: 10.1016/j.apenergy.2011.05.016
  • Hess, M. A., M. J. Haas, T. A. F. And, and W. N. Marmer. 2005. “Effect of Antioxidant Addition on NOx Emissions from Biodiesel.” Energy & Fuels 19: 1749–1754. doi: 10.1021/ef049682s
  • Hountalas, D. T., D. A. Kouremenos, K. B. Binde, and V. Mavropoulos Schwarz. 2003. “Effect of Injection Pressure on the Performance and Exhaust Emissions of a Heavy Duty DI Diesel Engine.” SAE Technical Paper: 01–0340. doi:10.4271/2003-01-0340.
  • Jayaprabakar, J., A. Karthikeyan, and V. Rameshkumar. 2015. “Effect of Injection Timing on the Combustion Characteristics of Rice Bran and Algae Biodiesel Blends in a Compression-Ignition Engine.” International Journal of Ambient Energy 38 (2): 116–121. doi:10.1080/01430750.2015.1048901.
  • Kannan, G. R., and R. Anand. 2011. “Experimental Evaluation of DI Diesel Engine Operating with Diestrol at Varying Injection Pressure and Injection Timing.” Fuel Processing Technology 92: 2252–2263. doi: 10.1016/j.fuproc.2011.07.015
  • Kass, M. D., S. A. Lewis, M. M. Swartz, S. P. Huff, D. W. Lee, R. M. Wagner, and J. M. E. Storey. 2009. “Utilizing Water Emulsification to Reduce NOx and Particulate Emissions Associated with Biodiesel.” Transactions of the ASABE 52: 5–13. doi: 10.13031/2013.25936
  • Kegl, B. 2008. “Effects of Biodiesel on Emissions of a bus Diesel Engine.” Bioresource Technology 99: 863–873. doi: 10.1016/j.biortech.2007.01.021
  • Labecki, L., and L. C. Ganippa. 2012. “Effects of Injection Parameters and EGR on Combustion and Emission Characteristics of Rapeseed oil and its Blends in Diesel Engines.” Fuel 98: 15–28. doi: 10.1016/j.fuel.2012.03.029
  • Lee, C. S., S. W. Park, and S. I. Kwon. 2005. “An Experimental Study on the Atomization and Combustion Characteristics of Biodiesel-Blended Fuels.” Energy & Fuels 19: 2201–2208. doi: 10.1021/ef050026h
  • Mani, M., and G. Nagarajan. 2009. “Influence of Injection Timing on Performance, Emission and Combustion Characteristics of a DI Diesel Engine Running on Waste Plastic oil.” Energy 34: 1617–1623. doi: 10.1016/j.energy.2009.07.010
  • Mohan, B., W. Yang, and S. K. Chou. 2013. “Fuel Injection Strategies for Performance Improvement and Emissions Reduction in Compression Ignition Engines–A Review.” Renewable and Sustainable Energy Reviews 28: 664–676. doi: 10.1016/j.rser.2013.08.051
  • Pandian, M., S. P. Sivapirakasam, and M. Udayakumar. 2010. “Investigations on Emission Characteristics of the Pongamia Biodiesel–Diesel Blend Fuelled Twin Cylinder Compression Ignition Direct Injection Engine Using Exhaust gas Recirculation Methodology and Dimethyl Carbonate as Additive.” Journal of Renewable and Sustainable Energy 2 (4): 043110. doi: 10.1063/1.3480016
  • Prabhu, A., M. Venkata Ramanan, and J. Jayaprabakar. 2018. “Effect of Compression Ratio on the Performance of CI Engine Fuelled with Freshwater Algae Biodiesel.” International Journal of Ambient Energy: 1–4. doi:10.1080/01430750.2018.1451380.
  • Prasad, P. V., B. D. Prasad, and R. H. Prakash. 2013. “Effect of Injection Timing on Performance and Emission Characteristics of 4S-Single Cylinder DI Diesel Engine Using PME Blend as Fuel.” International Journal of Engineering Research and Technology 2: 3201–3206.
  • Qi, D., M. Leick, Y. Liu, and C.-F. F. Lee. 2011. “Effect of EGR and Injection Timing on Combustion and Emission Characteristics of Split Injection Strategy DI-Diesel Engine Fueled with Biodiesel.” Fuel 90: 1884–1891. doi: 10.1016/j.fuel.2011.01.016
  • Rakopoulos, D. C., C. D. Rakopoulos, E. C. Kakaras, and E. G. Giakoumis. 2008. “Effects of Ethanol–Diesel Fuel Blends on the Performance and Exhaust Emissions of Heavy Duty DI Diesel Engine.” Energy Conversion and Management 49: 3155–3162. doi: 10.1016/j.enconman.2008.05.023
  • Sabari Girish, G., R. Vijayakothandaraman, and A. Prabhu. 2018. “Experimental Investigation on a CI Engine Fuelled with Bio Gas and Rice Straw Additives.” International Journal of Ambient Energy, 1–3. doi:10.1080/01430750.2017.1423388.
  • Saravanan, S., G. Nagarajan, and S. Sampath. 2013. “Combined Effect of Injection Timing, EGR and Injection Pressure in NOx Control of a Stationary Diesel Engine Fuelled with Crude Rice Bran oil Methyl Ester.” Fuel 104: 409–416. doi: 10.1016/j.fuel.2012.10.038
  • Sayin, C., M. Gumus, and M. Canakci. 2010. “Effect of Fuel Injection Timing on the Emissions of a Direct-Injection (DI) Diesel Engine Fueled with Canola Oil Methyl Ester−Diesel Fuel Blends.” Energy & Fuels 24: 2675–2682. doi: 10.1021/ef901451n
  • Solaimuthu, C., D. Senthilkumar, and V. Ganesan. 2012. “Effect of Static Injection Timing on the Performance and Emissions of Diesel Engine with Blends of Mahua Biodiesel.” International Journal of Mechanical and Materials Engineering 7: 89–95.
  • Suryawanshi, J., and N. Deshpande. 2005. “Effect of Injection Timing Retard on Emissions and Performance of a Pongamia oil Methyl Ester Fuelled CI Engine.” SAE Technical Papers. 01–3677. doi:10.4271/2005-01-3677.
  • Swaminathan, C., and J. Sarangan. 2012. “Performance and Exhaust Emission Characteristics of a CI Engine Fueled with Biodiesel (Fish oil) with DEE as Additive.” Biomass and Bioenergy 39: 168–74. doi: 10.1016/j.biombioe.2012.01.001
  • Tate, R. E., K. C. Watts, C. A. W. Allen, and K. I. Wilkie. 2006a. “The Densities of Three Biodiesel Fuels at Temperatures up to 300°C.” Fuel 85: 1004–1009. doi: 10.1016/j.fuel.2005.10.024
  • Tate, R. E., K. C. Watts, C. A. W. Allen, and K. I. Wilkie. 2006b. “The Viscosities of Three Biodiesel Fuels at Temperatures up to 300°C.” Fuel 85: 1010–1015. doi: 10.1016/j.fuel.2005.10.015
  • Tsolakis, A., A. Megaritis, M. Wyszynski, and K. Theinnoi. 2007. “Engine Performance and Emissions of a Diesel Engine Operating on Diesel-RME (Rapeseed Methyl Ester) Blends with EGR (Exhaust gas Recirculation).” Energy 32: 2072–2080. doi: 10.1016/j.energy.2007.05.016
  • Venkateswarlu, K., K. V. Kumar, B. S. R. Murthy, and V. V. Subbarao. 2012. “Effect of Exhaust Gas Recirculation and Ethyl Hexyl Nitrate Additive on Biodiesel Fuelled Diesel Engine for the Reduction of NOx Emissions.” Frontiers in Energy 6: 304–310. doi: 10.1007/s11708-012-0195-9
  • Wang, Z., K. K. Srinivasan, S. R. Krishnan, and S. Som. 2012. A Computational Investigation of Diesel and Biodiesel Combustion and NOx Formation in a Light-Duty Compression Ignition Engine. Energy Systems Conference.
  • Ye, P., and A. L. Boehman. 2012. “An Investigation of the Impact of Injection Strategy and Biodiesel on Engine NOx and Particulate Matter Emissions with a Common-Rail Turbocharged DI Diesel Engine.” Fuel 97: 476–488. doi: 10.1016/j.fuel.2012.02.021

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.